The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

chevytrucknut61 · 10-18-2009, 11:35 PM

I used a spotweld remover (a 3/8 drill bit) being carefull to only go thru the strip.

10-18-2009, 11:35 PM	#4
chevytrucknut61 Registered User Join Date: Mar 2004 Location: Wichita Ks. Posts: 130	Re: angle strips I used a spotweld remover (a 3/8 drill bit) being carefull to only go thru the strip.