The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

TxSqueeze · 05-30-2010, 08:56 PM

Hmmm, could have sworn I read a thread where a guy mounting his 18's had to machine his hub on the side AND the front, and then had to cut an 1/8" off the spindle. (1.25" rotor) If that's all I have to do is grind the hub and cut a little bit off the clips of the caps, I'll probably be getting the 18's for sure.

Do you know if I have to run a different caliper with a 1" rotor though?

05-30-2010, 08:56 PM	#737
TxSqueeze Registered User Join Date: Dec 2008 Location: Crane, Tx Posts: 147	Re: Boss 338 Wheels GROUP BUY Hmmm, could have sworn I read a thread where a guy mounting his 18's had to machine his hub on the side AND the front, and then had to cut an 1/8" off the spindle. (1.25" rotor) If that's all I have to do is grind the hub and cut a little bit off the clips of the caps, I'll probably be getting the 18's for sure. Do you know if I have to run a different caliper with a 1" rotor though? __________________ 68 SWB- Heads/Cam 6.0 w/4L80E swap in progress Last edited by TxSqueeze; 05-30-2010 at 08:58 PM.