The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

raycow · 10-15-2010, 12:39 AM

Are these the stock type shafts that thread into the bushings? If yes, and the bushings are still tight on the shafts, you can use the parts over.

Ray

10-15-2010, 12:39 AM	#2
raycow Registered User Join Date: Mar 2003 Location: San Francisco, CA USA Posts: 2,454	Re: Replace control arm shafts... Are these the stock type shafts that thread into the bushings? If yes, and the bushings are still tight on the shafts, you can use the parts over. Ray Last edited by raycow; 10-15-2010 at 12:44 AM.