The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Red Foreman · 01-05-2011, 02:16 AM

I think I may have worked out way around my quest of running six lug.
"Could I please have some input if anyone knows if I have overlooked something"
Ok here goes, I have worked out via 2nd gen Camaro forums that a common brake upgrade is running 12" spindles,Calipers & redrilled or (LE1 Rotors). Doner cars such as: Buick Full Size- Le Sabre Wagon / Electra Wagon 1977-1994; Cadillac Fleetwood and Deville 1977-1984 // Brougham and Fleetwood 1985-1994; Chevy Full Size 1977-1996 Caprice, Impala, Belair, Biscayne;
Olds Delta 88, Delta 88 Wagon and Olds 98 1977-1992; Pontiac Full Size Bonneville, Catalina, Grandville 1977-1986
This swap is made easy because bearings, ball joints & tie rods are interchangeable. Now if I was to go with the 72 to pre 77 Full size 12" spindles they actually use C10 rotors (A5 bearing 1.25") I could then use 6L rotors from CPP. Apart from a larger lower BJ (6141) "which I can get around" & tie rod end this type spindle should work??
My basic question is are the early spindles same as the 77 up apart from bearing size, lower BJ hole & tie rod hole? If I'm missing something please let me know? Cheers!
http://www.classicperform.com/Store/...ruck/CP4R5.htm Check this link for 6 lug rotors.

01-05-2011, 02:16 AM	#9
Red Foreman Registered User Join Date: Dec 2009 Location: Melbourne Australia Posts: 549	Re: 6 Lug on Camaro Clip I think I may have worked out way around my quest of running six lug. "Could I please have some input if anyone knows if I have overlooked something" Ok here goes, I have worked out via 2nd gen Camaro forums that a common brake upgrade is running 12" spindles,Calipers & redrilled or (LE1 Rotors). Doner cars such as: Buick Full Size- Le Sabre Wagon / Electra Wagon 1977-1994; Cadillac Fleetwood and Deville 1977-1984 // Brougham and Fleetwood 1985-1994; Chevy Full Size 1977-1996 Caprice, Impala, Belair, Biscayne; Olds Delta 88, Delta 88 Wagon and Olds 98 1977-1992; Pontiac Full Size Bonneville, Catalina, Grandville 1977-1986 This swap is made easy because bearings, ball joints & tie rods are interchangeable. Now if I was to go with the 72 to pre 77 Full size 12" spindles they actually use C10 rotors (A5 bearing 1.25") I could then use 6L rotors from CPP. Apart from a larger lower BJ (6141) "which I can get around" & tie rod end this type spindle should work?? My basic question is are the early spindles same as the 77 up apart from bearing size, lower BJ hole & tie rod hole? If I'm missing something please let me know? Cheers! http://www.classicperform.com/Store/...ruck/CP4R5.htm Check this link for 6 lug rotors. Last edited by Red Foreman; 01-05-2011 at 05:46 AM.