Quote:
Originally Posted by (joey)
no problem,more questions the better.now assuming you mean the rear disc setup,its just the stock rear end from the 2001 donor truck im using.where im swaping the 67 body onto the newer frame,im using as much stock suspension setup as i can.only for the rear instead of leafs im using bags and the trailing arms i fabbed.but what i can do is get a width measurement of both rear ends so in the future you guys could possibly just do the swap,cut the brackets off the old rear end and weld them on the new style one.then disc in the rear as simple as that
|
Forgot there for a minute you're using the newer chassis!
But that's still be some good info on how close the stocker is to the later model rear end. Thanks!