[kieth]

Originally Posted by munchieu

Attachment 754371

bolted to bottom of crossmember

Attachment 754372

Attachment 754379

does not line up at top. nowhere near close. These mounts are from the 82. cant use the 66 monts cuz there 6 banger mounts

I used motor mounts from a 91 suburban, the engine, the front crossmember, power steering box, itc., had this same problem, we trimmed the truck frame and redrilled new holes on the crossmember. Here is a link to my pictures. Kieth

http://kieth.smugmug.com/Trucks/66-G...03189305_KyUKk


If you will scroll thru the pictures u can see what we did to make the later motor mounts work. Kieth 918-446-2245 we think this lowered the eng/transmission combo enough so we did not have to modify the doghouse (trans tunnel)