The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

dwcsr · 04-30-2012, 07:45 PM

You can get another arm and bolt it to the top.
Heat and bend the arm into position that clears the bean. lop off the front arm part of the original and the rear arm part of the new top one. So you end up with a lower with no front arm and an upper with no rear arm.

Leave both arms intact until you get the upper arm bent correctly.

04-30-2012, 07:45 PM	#2
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,131	Re: Steering issues pleas help. You can get another arm and bolt it to the top. Heat and bend the arm into position that clears the bean. lop off the front arm part of the original and the rear arm part of the new top one. So you end up with a lower with no front arm and an upper with no rear arm. Leave both arms intact until you get the upper arm bent correctly.