Steering issues pleas help. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dwcsr · 04-30-2012, 07:45 PM

You can get another arm and bolt it to the top.
Heat and bend the arm into position that clears the bean. lop off the front arm part of the original and the rear arm part of the new top one. So you end up with a lower with no front arm and an upper with no rear arm.

Leave both arms intact until you get the upper arm bent correctly.

zenchal26 · 05-01-2012, 10:11 AM

Wont I have bump steer issues beacuse the drag link will be no where near level?

04-30-2012, 07:45 PM	#1
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,131	Re: Steering issues pleas help. You can get another arm and bolt it to the top. Heat and bend the arm into position that clears the bean. lop off the front arm part of the original and the rear arm part of the new top one. So you end up with a lower with no front arm and an upper with no rear arm. Leave both arms intact until you get the upper arm bent correctly.

05-01-2012, 10:11 AM	#2
zenchal26 Registered User Join Date: Sep 2011 Location: maine Posts: 152	Re: Steering issues pleas help. Wont I have bump steer issues beacuse the drag link will be no where near level?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.