|
Re: Disc brakes
Quote:
Originally Posted by mking
I have a similar delima. If you change the front, I think the hub diameters on the rear will be bigger then the front.
I have some 6 bolt wheels from a late 90's truck that I'd like to use. But the center hole is 3". The hub on the stock rear end is 3 1/2". Is changing the rear end my only option?
Posted via Mobile Device
|
You can have the wheels machined to fit over the rear hubs,Or you can have the hubs machined to fit any of the later wheels.Keep in mind that the offset on later wheels is different so you may not like the way they tuck way under and there is a possibility of the wheels inner lip hitting on the front control arms or the tie rod ends.
__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion.
You can't fix stupid,not even with duct tape.
"My appearance is due to the fact that "GOD" does punish you for having too much fun!"
Barrett-Jackson has perfected alchemy,they make rust into gold!
"You can lead a horse to water but you can't saddle a duck"
"Cleverly disguised as a 'Responsible Adult'
"Sometimes your Knight in shining armor is just a retard in tinfoil"
|