Quote:
Originally Posted by Ta2Don
Hey Jmo, and any other body guys who care to add input, I have a quick question or 3 about glazing putty… Jmo is this the putty you referred to?
Is it a 2 part mix like Body filler, and what grit paper would be best for smoothing out once the putty is cured? And finally, would I just need regular primer over these spots before paint? Thanks for your input guys!!! 
All this is new to me and leaving me a bit  |
That's the stuff it's. 2 part mix. And I usually start with like 100 grit paper to take down the high spots or not so smooth edges and then block with 180 then feather around with 220 and 300 and then sometimes 400 grit. I'm not a huge fan of the primer will fill it method I like to be able to make my bodywork smooth enough to seal it if I had too. I usually use an etch primer first for any bare metal any larger than the size of a nickel. Then a few coats of high build primer and some guild coat then block with 400 and then 600 and paint....hope this helps