The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Andy4639 · 07-16-2014, 03:45 PM

I would agree on this also. I don't know if I would weld them are not. Just tack them in so they want spin would be enough. I would try finding the correct kind of stud and looking really close to the frame and seeing if you can weld the frame up enough to hold the studs. This maybe a better opition.

07-16-2014, 03:45 PM	#7
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: upper a arm I would agree on this also. I don't know if I would weld them are not. Just tack them in so they want spin would be enough. I would try finding the correct kind of stud and looking really close to the frame and seeing if you can weld the frame up enough to hold the studs. This maybe a better opition. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.