The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Confirming frame on 1972 3/4 ton suburban

orange72sub · 04-04-2015, 08:51 PM

That number was by steering box and on top of frame rail by drivers door. There was also another number on the side of the front end of frame it is 60250 I am not sure what that number means at all. Any help is much appreciated. The reason I think it might be original is that it still has the eaton rear end on it and I believe the original dana 44 up front. This is the hard part about working on these old trucks you just never know what really ever happened in their life time.

04-04-2015, 08:51 PM	#3
orange72sub Registered User Join Date: Jan 2012 Location: Dayton, Ohio Posts: 71	Re: Confirming frame on 1972 3/4 ton suburban That number was by steering box and on top of frame rail by drivers door. There was also another number on the side of the front end of frame it is 60250 I am not sure what that number means at all. Any help is much appreciated. The reason I think it might be original is that it still has the eaton rear end on it and I believe the original dana 44 up front. This is the hard part about working on these old trucks you just never know what really ever happened in their life time.