The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Do you have a 4WD with a 3 SPD on the colum transmission?

**aerotruk63** · 05-08-2015, 09:33 AM

You'll need to keep the pivot point in the original position for the lever to go flat parallel to the floor as well as to clear the seat in the vertical position.
I'll use the top of my frame as a reference point off of my setup and the distance from the TC to guide your installation/modification.

What is the casting code on the 3SPD?

05-08-2015, 09:33 AM	#26
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: Do you have a 4WD with a 3 SPD on the colum transmission? You'll need to keep the pivot point in the original position for the lever to go flat parallel to the floor as well as to clear the seat in the vertical position. I'll use the top of my frame as a reference point off of my setup and the distance from the TC to guide your installation/modification. What is the casting code on the 3SPD? __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1 Last edited by aerotruk63; 05-08-2015 at 10:08 AM.