The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Aruba1 · 08-19-2015, 04:22 PM

I am running a 1997 NV4500 with internal slave cylinder and a OEM clutch MC. I choose to use the used slave cylinder and it started leaking. Three hours later I installed a new internal slave cylinder from NAPA and it started leaking immediately. Today the engine is coming out to put a GM slave cylinder. If you go with the internal slave, make sure to go OEM and not those cheap China S!@t. The motor is a 2000/2001 5.3L with a GTO intake.

08-19-2015, 04:22 PM	#13
Aruba1 Registered User Join Date: Apr 2014 Location: Birmingham, AL Posts: 560	Re: Anybody running a hydraulic clutch? I am running a 1997 NV4500 with internal slave cylinder and a OEM clutch MC. I choose to use the used slave cylinder and it started leaking. Three hours later I installed a new internal slave cylinder from NAPA and it started leaking immediately. Today the engine is coming out to put a GM slave cylinder. If you go with the internal slave, make sure to go OEM and not those cheap China S!@t. The motor is a 2000/2001 5.3L with a GTO intake.