|
Re: what size to plug disconnected brake lines at the rearend
What I would do is disconnect the two hard lines from the brass tee and leave the tee connected to the flex line. The tee should un bolt from the axle. Plug the two open ports of the tee with inverted flare plugs that can be bought at Napa for a couple bucks a piece. It's hard to tell from the picture if the hard lines on your axle are 3/16" or 1/4". If they are the smaller 3/16", you will need two 3/8"-24 inverted flare plugs. If they are the larger 1/4" line, you will need 7/16"-24 inverted flare plugs. Hope this helps
|