01-18-2020, 10:20 PM
|
#6
|
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: Ignition removal?
Quote:
Originally Posted by Simple10
Something is loose on the back of mine ...does the front bezel tighten it up or the piece on the back?must be a bad connection somewhere sometimes it won’t start unless I wriggle the back of it around.
|
You can twist the barrel like Doc stated in the link but it want come completely apart unless the cylinder is removed. You need to take the plastic wire connector off and twist it back together then take the cylinder out like you want to begin with then twist it off.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71
Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour
http://upstategmtrucks.com/
Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!
LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
|
|
|