The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

03BlkZ · 05-23-2021, 07:59 AM

So I installed a CPP front disc brake conversion on my 70 C10. The brakes work great and have no real issue except the hoses from the frame to the caliper are way too long and the orientation of how the attach to the caliper makes them rub. I cut a piece of rubber hose to put over the brake hoses for not to keep chafing to a minimum but is there a different or maybe shorter brake hose people use? I would prefer my hoses to not touch anything if possible.

05-23-2021, 07:59 AM	#1
03BlkZ Registered User Join Date: Nov 2015 Location: Hewitt, Tx Posts: 386	Front brake hose question So I installed a CPP front disc brake conversion on my 70 C10. The brakes work great and have no real issue except the hoses from the frame to the caliper are way too long and the orientation of how the attach to the caliper makes them rub. I cut a piece of rubber hose to put over the brake hoses for not to keep chafing to a minimum but is there a different or maybe shorter brake hose people use? I would prefer my hoses to not touch anything if possible.