The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Install of 292 Inline 6, How to Deal With Engine Mounts

Cris · 09-30-2021, 02:20 PM

Thanks guys, sounds like the consensus is bolt the frame perches to the frame, bolt the engine perches and the rubber mounts to the engine. Then drop engine in place. I'll leave the frame perches a little loose so position can be adjusted.

As TJ said, I'll leave the engine up a little off the frame perches to be able to see the alignment, then put the bolts in.

09-30-2021, 02:20 PM	#5
Cris Registered User Join Date: Aug 2016 Location: Los Altos Hills, California Posts: 170	Re: Install of 292 Inline 6, How to Deal With Engine Mounts Thanks guys, sounds like the consensus is bolt the frame perches to the frame, bolt the engine perches and the rubber mounts to the engine. Then drop engine in place. I'll leave the frame perches a little loose so position can be adjusted. As TJ said, I'll leave the engine up a little off the frame perches to be able to see the alignment, then put the bolts in.