Quote:
Originally Posted by Already Gone
Didn't say whether you have long or short box truck. Anyway just recently done is my 72 Long bed with a 2 1/2 dropped spingle up front and retained the original springs and control arms etc. Out back like you thought a 4 inch spring drop would give me the look I wanted but back was lower than front when installed so changed them for 3 inch rear springs. Used shock relocators out back as well. Tires are 255/60 17 all the way around. ic on hoist is with the 4 inch rear spring.
|
Thanks for the pictures!
You sure are right, I didn’t reference the wheelbase. I apologize for that. Mine is a short bed, so I’m hoping I can get a nice gentle rake look.
I ordered the CPP kit with the shocks a 0 drop F and 4” drop R and they said that will give me the look I want. I also am running a LS swap which is probably a bit heavier in the front then the normal C10 setup by 50-75 pounds.
Worse case I can swap the springs out in the back if it’s not right.