More specifically, I'd like to run a 10" wide front wheel. Nate from PB indicated the most BS he's run is 6" on a front wheel. Over at the custom offsets website there's a guy running a 22X11 up front with 6.7" BS with 5/7 drop (link below)
I was hoping to get input from some of the guys more familiar with setups like this or similar to this?
My goal is a 17x10 honoring the 6" BS Nate described remembering the Belltech spindles add .45 inches width each side.
https://www.customwheeloffset.com/wh...-accelera-iota
Any help appreciated!