Staggered - The 1947 - Present Chevrolet & GMC Truck Message Board Network

moregrip · 01-25-2026, 04:03 PM

More specifically, I'd like to run a 10" wide front wheel. Nate from PB indicated the most BS he's run is 6" on a front wheel. Over at the custom offsets website there's a guy running a 22X11 up front with 6.7" BS with 5/7 drop (link below)

I was hoping to get input from some of the guys more familiar with setups like this or similar to this?

My goal is a 17x10 honoring the 6" BS Nate described remembering the Belltech spindles add .45 inches width each side.

https://www.customwheeloffset.com/wh...-accelera-iota

Any help appreciated!

01-25-2026, 04:03 PM	#2
moregrip Registered User Join Date: Dec 2008 Location: Wyoming Posts: 826	Re: Staggered More specifically, I'd like to run a 10" wide front wheel. Nate from PB indicated the most BS he's run is 6" on a front wheel. Over at the custom offsets website there's a guy running a 22X11 up front with 6.7" BS with 5/7 drop (link below) I was hoping to get input from some of the guys more familiar with setups like this or similar to this? My goal is a 17x10 honoring the 6" BS Nate described remembering the Belltech spindles add .45 inches width each side. https://www.customwheeloffset.com/wh...-accelera-iota Any help appreciated! __________________ 1983 Chevy C10 250/3spd (current project truck) 1976 Chevy C10 350/350 Heavy Half (future project truck) Last edited by moregrip; 01-26-2026 at 09:54 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.