Electric fuel pump for cab tank?

[Jrainman]

Had a outside rail fuel pump on initial EFI install , to much noise for me , so I cut a in tank fuel pump I had laying around from a Dodge in to the stock 72 fuel sending unit a couple of clamps a few inches of hose . then for the return I put a 3/8 bulk head fitting a few inches away from the sending unit ,keeping the return close to the sending unit hole is key so no metal shavings when drilling hole and also to tighten the bulk head fitting to the tank . overall worked very well , cut the noise down a ton , the only issue was slosh below a 1/4 tank on sharp turns , ran that for about a year before getting around to a rear frame tank install .