Need way quieter exhaust now...

[Extended Power]

I built my exhaust using the Flow Master Delta 44’s in 3”.
The mufflers are under the box, not the cab.
I had the original Flow Master 40 Series in 2 1/2” before on the old engine, which had the mufflers under the cab, and out the sides, just in front of the back tires, and it was way quieter.
I thought the Delta 44’s were gonna be quieter, but aughhhhh...no.

I want quieter exhaust...I can add cutouts if needed.
The wife is not too keen on going for drives when it’s this loud.

Any recommendations?

PS: I used v-bands on the muffler inlets and outlets, so it should be easy peasy to change them out.

[3drburb]

I've heard that Dynomax Super Turbo are nice compared to most.

[Rickjz]

I am enjoying my Magnaflow 11266 mufflers. They are on a Blazer with the top off. I have 3” exhaust.

[Rickjz]

I thought that I went with 3” exhaust but actually it is 2.5”.

[Dashman]

I purposely designed my own exhaust system to place the mufflers further behind the cab on a long bed K10. I also went with Magnaflow in a 4" x 9" (11225, 2.25"). I was amazed at how quiet it was. That was a great idea on the V-bands. I thought of welding those in at the collectors.

[SCOTI]

Another vote on the Dynomax Super Turbo mufflers. My dually has 1 3/4" long tube Chevelle headers into 3" head pipes w/a H-crossover to the mufflers. I used reducers to go down to 2.5" tailpipes & they exit @ the corners of the bed/bumper.

[Sheepdip]

Originally Posted by Extended Power

I built my exhaust using the Flow Master Delta 44’s in 3”.
The mufflers are under the box, not the cab.

Where do the pipes exit now? Any exhaust that exits under the truck will rattle your brains out, not to mention when you leave the pavement you look like a helicopter landing.

[geezer#99]

Originally Posted by Extended Power

I thought the Delta 44’s were gonna be quieter, but aughhhhh...no.

I want quieter exhaust...I can add cutouts if needed.
The wife is not too keen on going for drives when it’s this loud.

Any recommendations?

.

Back in the seventies there was a guy in The Hat that transplanted a rowdy sb into his 70 Volvo p1800. A true sleeper.
He ran 4 Chrysler Imperial turbos. Mufflers just like the turbo max.
He had room for 4 in a smallish car.
Maybe you do to.

[Extended Power]

Originally Posted by Dashman

I purposely designed my own exhaust system to place the mufflers further behind the cab on a long bed K10. I also went with Magnaflow in a 4" x 9" (11225, 2.25"). I was amazed at how quiet it was. That was a great idea on the V-bands. I thought of welding those in at the collectors.

I had the headers made with v-bands as well. (Lemons Headers)

Originally Posted by Sheepdip

Where do the pipes exit now? Any exhaust that exits under the truck will rattle your brains out, not to mention when you leave the pavement you look like a helicopter landing.

Same place as before...just in front of the rear tires.
-did not want them out the back and passing by the fuel tank.
-did not want down drafts as my back alley is dirt. (I spend enough time cleaning and polishing this thing.)

[Willshook]

Easiest way to quiet an exhaust is to add a crossover. Makes a huge difference.

[LS short box]

My vote is for the Dyno Max turbos. Biggest you can fit length wise.

[weq92f]

Originally Posted by Willshook

Easiest way to quiet an exhaust is to add a crossover. Makes a huge difference.

.

I added an H pipe off long tube 2 1/2 out back through MagnaFlows under bed. It's only loud from the back...in cab noise is not bad.

-Kevin

[RichardJ]

>> had the mufflers under the cab, and out the sides, just in front of the back tires, and it was way quieter.<<

That setup had longer pipes AFTER the muffler.
Short pipes after the muffler are always louder.
Changing the muffler with the same short pipe and what looks like a megaphone tip will change very little, regardless of the muffler choice. You could consider running the pipes over the axle and out the side behind the tires.

[Palf70Step]

I liked my Flowmaster Delta 50 series. They were quiet to mild inside, but let you know on the outside they mean business. The ones on my 70 are real quiet, too quiet, but not sure what Generic brand my friend had put on when he had them done 10 years ago.

[Already Gone]

Originally Posted by SCOTI

Another vote on the Dynomax Super Turbo mufflers. My dually has 1 3/4" long tube Chevelle headers into 3" head pipes w/a H-crossover to the mufflers. I used reducers to go down to 2.5" tailpipes & they exit @ the corners of the bed/bumper.

I agree with the Dynomax Super turbos. Have the linked set with an H pipe on my sock 350 truck truck for 10 years and ae using them with the newly rebuit small block 400. . Only get really loud is when u stomp on it.

https://www.dynomax.com/catalogsearc...esult/?q=17747

[72SB]

SpinTech Sportsman XL have a nice note but are not loud

[WorldsCrappiestTruck]

Posts 34-35 for me here. I REALLY dig the setup I have. Barks when I want it to, soft & quiet behind the wheel.

https://67-72chevytrucks.com/vboard/...=852752&page=2