Question regarding vin and model numbers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**LockDoc** · Yesterday, 10:52 PM

-
Does the SPID sticker on the inside of the glove box door list the original wheel base, to see if anything has been changed there. Original short bed would be 115" and long bed would be 127"

Is the truck titled in your name at this time? If not I don't think I would do any more to it until I got it registered in your name. It looks like someone possibly used a couple of trucks to make one.

There should also be a number stamped on top of the frame rail by the steering box. Check it out. You may need to wire brush the area to see it.

Yesterday, 10:52 PM	#1
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,542	Re: Question regarding vin and model numbers - Does the SPID sticker on the inside of the glove box door list the original wheel base, to see if anything has been changed there. Original short bed would be 115" and long bed would be 127" Is the truck titled in your name at this time? If not I don't think I would do any more to it until I got it registered in your name. It looks like someone possibly used a couple of trucks to make one. There should also be a number stamped on top of the frame rail by the steering box. Check it out. You may need to wire brush the area to see it. __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.