'82 Black Chevrolet K-10 Silverado F/S - The 1947 - Present Chevrolet & GMC Truck Message Board Network

doc70sub · 11-28-2003, 07:43 PM

Selling my project truck, an '82 K-10 LWB w/ 350 4-bbl, TH-700 (rebuilt), 208 (rebuilt), 10-bolts, ran great until a carb fire that scorched the firewall from the center to the A/C box, very saveable, main bulkhead unaffected, another wiring harness (inside cab & out) & heater box/controls included, bedliner, toolbox, good black bench, excellent burgandy headliner, tilt w/ cruise column, good factory black body, etc.

Clean title, $500

Thanks!
Doc

Destructo · 11-28-2003, 08:00 PM

That a very good deal! I'v seen the truck in person, and its for sure worth 500 bucks.

BigBlockBurris · 11-28-2003, 10:45 PM

PM and E-mail sent!

BBB

doc70sub · 12-02-2003, 08:12 PM

Truck still available.....

doc70sub · 12-04-2003, 09:03 PM

BTTT....

truckman32 · 12-06-2003, 11:11 AM

is it a 4x4? or 2x4 either way i'm interested in the truck do you have any pictures if so send them to truckman32@aol.com

doc70sub · 12-06-2003, 12:16 PM

Yes, the K-10 is a 4x4...pics on the way.
Doc

truckman32 · 12-06-2003, 12:43 PM

i pm'd you doc

doc70sub · 12-06-2003, 01:03 PM

Pic of the firewall after a quickie rust primer/black paint job (too cold to make it pretty).

Fire was concentrated to the carb & A/C box.....removed A/C hardware to clean/paint/repair engine bay.

Doc

doc70sub · 12-06-2003, 01:04 PM

Pic of the rear, some surface rust where the trim was pulled off be P/O..

doc70sub · 12-06-2003, 01:04 PM

Nice black seat....

doc70sub · 12-06-2003, 01:05 PM

Headliner...

truckman32 · 12-06-2003, 03:23 PM

thanks doc,let me make some plans for coming to your house if you will pm me your phone number i'll call when is a good time for you

**old Rusty C10** · 12-06-2003, 03:39 PM

not trying to horn in but i will have a good heater bod out of a truck like that if anyone needs it $40 plus the ride for inner and outer heater boxes and all parts with em

doc70sub · 12-12-2003, 02:31 PM

If this is still here next week, I'm parting her out....got to go!!

Rebuilt 700-R4 w/ 208 (complete) - $300

Nice long bed w/ gate & bedliner - $250

Cab w/ title/doors/harness, etc. - $200

Axles w/ rolling frame, etc. - $100

Tilt column - ???

Dual tanks - ???

Good Black bench seat - ???

Any parts you want, speak up! LOL

Thanks!
Doc

Destructo · 12-12-2003, 03:07 PM

Hey, find out some info on the axles and I may be interested in the frame. Also is the power steering pump good? Wiper motor? This is if you part it out anyway. I need a few parts hehe. Wish I could buy the whole damn thing off of ya, I need so many parts!

**old Rusty C10** · 12-12-2003, 08:11 PM

its a shame it would go to parts but how much if i wanted the rear bumper with brackets and the bed?
i may also want the right side tank and parts to convert mine to dual tanks im trying to decide as per my post in 73-87.

Destructo · 12-12-2003, 08:43 PM

I really want it myself, but I would most likely part it out myself since I need so many parts for my 85 K10. I would probably keep the front fenders and doors for my own truck incase I tore mine up. I may also be interested in the steering box if its not too sloppy. I just need to make a big parts list hehe.

truckman32 · 12-13-2003, 02:38 PM

hey doc i pm'd you

Old Chevy Lover · 12-13-2003, 07:02 PM

if you end up parting it out, how's the dash pad? what color is it?

doc70sub · 12-14-2003, 11:01 AM

No dash pad worth mentioning....
Doc

doc70sub · 12-14-2003, 08:32 PM

Truck has sold, cash in hand, title signed....thanks guys!!
Doc

11-28-2003, 07:43 PM	#1
doc70sub Registered User Join Date: Dec 2000 Location: Thomasville, NC Posts: 669	'82 Black Chevrolet K-10 Silverado F/S Selling my project truck, an '82 K-10 LWB w/ 350 4-bbl, TH-700 (rebuilt), 208 (rebuilt), 10-bolts, ran great until a carb fire that scorched the firewall from the center to the A/C box, very saveable, main bulkhead unaffected, another wiring harness (inside cab & out) & heater box/controls included, bedliner, toolbox, good black bench, excellent burgandy headliner, tilt w/ cruise column, good factory black body, etc. Clean title, $500 Thanks! Doc __________________ 1970 Sub C-10 - 350/TH-350/3.73 12-bolt Came home from the hospital in it & mine ever since. 1966 Catalina Ventura 2-door fastback 389/TH400 Last edited by doc70sub; 12-06-2003 at 01:00 PM.

11-28-2003, 10:45 PM	#3
BigBlockBurris Registered User Join Date: Nov 2001 Location: Concord,NC,USA Posts: 743	PM and E-mail sent PM and E-mail sent! BBB

12-02-2003, 08:12 PM	#4
doc70sub Registered User Join Date: Dec 2000 Location: Thomasville, NC Posts: 669	Truck still available..... __________________ 1970 Sub C-10 - 350/TH-350/3.73 12-bolt Came home from the hospital in it & mine ever since. 1966 Catalina Ventura 2-door fastback 389/TH400 Last edited by doc70sub; 12-04-2003 at 09:02 PM.

12-04-2003, 09:03 PM	#5
doc70sub Registered User Join Date: Dec 2000 Location: Thomasville, NC Posts: 669	BTTT.... __________________ 1970 Sub C-10 - 350/TH-350/3.73 12-bolt Came home from the hospital in it & mine ever since. 1966 Catalina Ventura 2-door fastback 389/TH400

12-06-2003, 11:11 AM	#6
truckman32 AND HOLDING ON TO THE C10 Join Date: Jan 2003 Location: MT.STERLING,KY Posts: 390	chevrolet k-10 for sale is it a 4x4? or 2x4 either way i'm interested in the truck do you have any pictures if so send them to truckman32@aol.com __________________ 66 swb/ss chevy c10 SOLD 62 swb/fs chevy c10 :p SOLD 84 swb/fs chevy c10 91 sdime 383/th350

11-28-2003, 08:00 PM	#2
Destructo Registered User Join Date: Sep 2003 Location: Lewisville, NC Posts: 1,836	That a very good deal! I'v seen the truck in person, and its for sure worth 500 bucks.

12-06-2003, 12:16 PM	#7
doc70sub Registered User Join Date: Dec 2000 Location: Thomasville, NC Posts: 669	Yes, the K-10 is a 4x4...pics on the way. Doc Attached Images __________________ 1970 Sub C-10 - 350/TH-350/3.73 12-bolt Came home from the hospital in it & mine ever since. 1966 Catalina Ventura 2-door fastback 389/TH400

12-06-2003, 12:43 PM	#8
truckman32 AND HOLDING ON TO THE C10 Join Date: Jan 2003 Location: MT.STERLING,KY Posts: 390	i pm'd you doc __________________ 66 swb/ss chevy c10 SOLD 62 swb/fs chevy c10 :p SOLD 84 swb/fs chevy c10 91 sdime 383/th350

12-06-2003, 01:03 PM	#9
doc70sub Registered User Join Date: Dec 2000 Location: Thomasville, NC Posts: 669	Pic of the firewall after a quickie rust primer/black paint job (too cold to make it pretty). Fire was concentrated to the carb & A/C box.....removed A/C hardware to clean/paint/repair engine bay. Doc Attached Images __________________ 1970 Sub C-10 - 350/TH-350/3.73 12-bolt Came home from the hospital in it & mine ever since. 1966 Catalina Ventura 2-door fastback 389/TH400

12-06-2003, 01:04 PM	#10
doc70sub Registered User Join Date: Dec 2000 Location: Thomasville, NC Posts: 669	Pic of the rear, some surface rust where the trim was pulled off be P/O.. Attached Images __________________ 1970 Sub C-10 - 350/TH-350/3.73 12-bolt Came home from the hospital in it & mine ever since. 1966 Catalina Ventura 2-door fastback 389/TH400

12-06-2003, 01:04 PM	#11
doc70sub Registered User Join Date: Dec 2000 Location: Thomasville, NC Posts: 669	Nice black seat.... Attached Images __________________ 1970 Sub C-10 - 350/TH-350/3.73 12-bolt Came home from the hospital in it & mine ever since. 1966 Catalina Ventura 2-door fastback 389/TH400

12-06-2003, 01:05 PM	#12
doc70sub Registered User Join Date: Dec 2000 Location: Thomasville, NC Posts: 669	Headliner... Attached Images __________________ 1970 Sub C-10 - 350/TH-350/3.73 12-bolt Came home from the hospital in it & mine ever since. 1966 Catalina Ventura 2-door fastback 389/TH400

12-06-2003, 03:23 PM	#13
truckman32 AND HOLDING ON TO THE C10 Join Date: Jan 2003 Location: MT.STERLING,KY Posts: 390	thanks doc,let me make some plans for coming to your house if you will pm me your phone number i'll call when is a good time for you __________________ 66 swb/ss chevy c10 SOLD 62 swb/fs chevy c10 :p SOLD 84 swb/fs chevy c10 91 sdime 383/th350

12-06-2003, 03:39 PM	#14
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,345	not trying to horn in but i will have a good heater bod out of a truck like that if anyone needs it $40 plus the ride for inner and outer heater boxes and all parts with em __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

12-12-2003, 02:31 PM	#15
doc70sub Registered User Join Date: Dec 2000 Location: Thomasville, NC Posts: 669	If this is still here next week, I'm parting her out....got to go!! Rebuilt 700-R4 w/ 208 (complete) - $300 Nice long bed w/ gate & bedliner - $250 Cab w/ title/doors/harness, etc. - $200 Axles w/ rolling frame, etc. - $100 Tilt column - ??? Dual tanks - ??? Good Black bench seat - ??? Any parts you want, speak up! LOL Thanks! Doc __________________ 1970 Sub C-10 - 350/TH-350/3.73 12-bolt Came home from the hospital in it & mine ever since. 1966 Catalina Ventura 2-door fastback 389/TH400



Register or Log In To remove these advertisements.

12-12-2003, 03:07 PM	#16
Destructo Registered User Join Date: Sep 2003 Location: Lewisville, NC Posts: 1,836	Hey, find out some info on the axles and I may be interested in the frame. Also is the power steering pump good? Wiper motor? This is if you part it out anyway. I need a few parts hehe. Wish I could buy the whole damn thing off of ya, I need so many parts!

12-12-2003, 08:11 PM	#17
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,345	its a shame it would go to parts but how much if i wanted the rear bumper with brackets and the bed? i may also want the right side tank and parts to convert mine to dual tanks im trying to decide as per my post in 73-87. __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

12-12-2003, 08:43 PM	#18
Destructo Registered User Join Date: Sep 2003 Location: Lewisville, NC Posts: 1,836	I really want it myself, but I would most likely part it out myself since I need so many parts for my 85 K10. I would probably keep the front fenders and doors for my own truck incase I tore mine up. I may also be interested in the steering box if its not too sloppy. I just need to make a big parts list hehe.

12-13-2003, 02:38 PM	#19
truckman32 AND HOLDING ON TO THE C10 Join Date: Jan 2003 Location: MT.STERLING,KY Posts: 390	hey doc i pm'd you __________________ 66 swb/ss chevy c10 SOLD 62 swb/fs chevy c10 :p SOLD 84 swb/fs chevy c10 91 sdime 383/th350

12-13-2003, 07:02 PM	#20
Old Chevy Lover Registered User Join Date: Dec 2002 Location: Chillicothe OHIO Posts: 717	if you end up parting it out, how's the dash pad? what color is it? __________________ Keith 70 Chevelle Malibu SS Clone 468/Auto 72 C10 SWB 350/Auto 13 Camaro SS/RS 6.2/Auto

12-14-2003, 11:01 AM	#21
doc70sub Registered User Join Date: Dec 2000 Location: Thomasville, NC Posts: 669	No dash pad worth mentioning.... Doc __________________ 1970 Sub C-10 - 350/TH-350/3.73 12-bolt Came home from the hospital in it & mine ever since. 1966 Catalina Ventura 2-door fastback 389/TH400

12-14-2003, 08:32 PM	#22
doc70sub Registered User Join Date: Dec 2000 Location: Thomasville, NC Posts: 669	Truck has sold, cash in hand, title signed....thanks guys!! Doc __________________ 1970 Sub C-10 - 350/TH-350/3.73 12-bolt Came home from the hospital in it & mine ever since. 1966 Catalina Ventura 2-door fastback 389/TH400

Register or Log In To remove these advertisements.