TX Anyone rebuilding hinges?

[kev2809]

im in need of getting my upper hatch hinges rebuilt. ive tried a few times and i cant get them apart. one is so close but it wont come out..giving up. ive read they are they same process as the door hinges. i already have some hinge rebuild kits i already bought for my doors or you can supply your own. let me know if anyone wants to give these a shot. i can mail them out and pay to mail them back

[1rippen6]

You may want to post on the blazer side, I've rebuild a few sets but they are a pain. Tmend might be interested in rebuilding them for you.

[kev2809]

maaaan im so close i have them all out except a very small piece on each hinge. im soaking them in trans fluid again to see if it helps

[Getter-Done]

Originally Posted by kev2809

maaaan im so close i have them all out except a very small piece on each hinge. im soaking them in trans fluid again to see if it helps

Try a 50/50 mix of acetone and Dexron/Mercon Automatic Transmission Fluid (ATF) and shake well and then submerge the hinge.

That has worked for me in the past.

Just looked it up for a reference.

And even Road Kill uses it So it has to work.

Link: https://m.roadkillcustoms.com/how-to...do%20its%20job.

[sauxs]

Had my 70 C10 hood hinges and first get Camaro Door hinges rebuilt by Willie at,

Hood Hinge Repair
Willie Wilson
willie@hoodhingerepair.com | 434-258-2606

Easy to work with, prompt service and I thought he very was reasonable for the services provided.

Thanks,
Steve

[kev2809]

thanks for the tips yall, i FINALLY got the damn pins out. i need to clean them up from where the air hammer punched everywhere lol. hoping the new ones go in easier than the old came out