![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Rottenwood Garage Member
Join Date: May 2005
Location: Marietta, Georgia
Posts: 4,321
|
2 SHORT BED rolling frames for sale 2wd coil
Now that is has cooled down a bit I am getting ready to finish stripping down 2 of my Parts trucks. Both are Southern trucks. Both are 2x4, 6 lug, drum brake and coil spring. I do not know the rear end ratio in either.
1970 V8, automatic fleet side 1969 was 6cyl., manual, step side, but has been converted to V8, auto. Both have had some type of hitch welded on the rear and cut back off. Both seem to be fairly rust free and structurally sound. $300 each I also have another 1970, short, step, 2x4, 6cyl, manual, coil frame with that has been hit badly in the front right. Frame is bent and NOT REPAIRABLE. It would be good for the back 1/2 for a long/short bed cut frame conversion or repair You might could use the back end as a donor chassis for an extreeme bagged project. $100 The trucks are still together so pictures of the frames are not possible at this time. Zip is 30067
__________________
2004 Chevrolet Suburban C1500 2001 Chevrolet 2500HD Crew 6.0 1999 Harley Davidson Electra Glide 1972 Chevrolet C-20 Custom Camper "Dump Truck" 1972 Chevrolet C-20 Suburban "Big Green" 1969 Chevrolet C-50 Wedge Hauler "Leonidis" 1966 C-10 2x4 short fleet 327 4 speed "Race Truck" 1952 Plymouth Cranbrook "Rican" (my grandfathers) 1931 Ford Model A Coupe "Black Beauty" 1930 Ford Model A truck "Club Cab" 4x4 Rottenwood Garage and Speed Shop.....where everything must be racy! It's not just a hobby..It's a LIFESTYLE!!! Thanks for nothing Barrett-Jackson You cant fix stupid or teach accountability! Time wasters, looky Lous and tire kickers are everywhere! Last edited by 72freak; 09-15-2007 at 08:17 PM. |
![]() |
![]() |
Bookmarks |
|
|