VA Speedwarning tach dash with wiring and buzzer choose your options!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VA72C10 · 06-03-2012, 04:06 AM

I am putting together a speedwarning dash with tach in it right now. Have a few options so wanted to offer them before completing...

Can be factory (nice) tach or new aftermarket
Nice original or new lens
In the extra hole I can install vac, air pressure, (both are nice originals) or a clock.

OR...

Can install a new 8K tach...only option at that point is for a clock in the extra hole as the lens for the 8K doesn't come with a provision for vac or air...

650 shipped for the s/w tach setup with good wiring and buzzer and new bezel of your choice (black or woodgrain)

750 shipped with the air pressure or vacuum gauges

775 shipped with the clock

800 shipped with an 8K rpm tach and open gauge spot like most tach dashes

925 shipped with an 8K rpm tach and a clock in the extra spot.

Payment required in advance of me building. Will be a 1-2 week estimated turn-around

paypal (as personal (payment owed) or w/ 3% fees added) or check/postal money order...or cash in person

Will post pictures of the actual s/w head and buzzer setup I will be using for this dash tomorrow. head's as nice as you will find...

VA72C10 · 06-03-2012, 07:59 PM

ttt

VA72C10 · 06-05-2012, 02:31 PM

ttt

VA72C10 · 06-06-2012, 04:48 AM

ttt....

VA72C10 · 06-07-2012, 02:06 AM

ttt....

VA72C10 · 06-09-2012, 01:02 AM

ttt

VA72C10 · 06-10-2012, 11:42 AM

Prices reduced.
Posted via Mobile Device

VA72C10 · 06-13-2012, 04:14 AM

ttt

VA72C10 · 06-13-2012, 11:34 PM

ttt

VA72C10 · 06-22-2012, 05:55 PM

ttt

Tinkermc · 06-22-2012, 06:45 PM

ttt

tr69c10 · 06-22-2012, 07:54 PM

I need a buzzer any extras
Posted via Mobile Device

**DeadheadNM** · 06-23-2012, 11:29 AM

Tempting - 1) do you happen to have an OEM tach/vac lens for this build; 2) would the woodgrain bezel be modified to accept the s/w dial; 3) 80 lb oil gauge; 4) tach harness and s/w harness included? Thanks, Pete

VA72C10 · 06-23-2012, 02:14 PM

Quote:

Originally Posted by DeadheadNM

Tempting - 1) do you happen to have an OEM tach/vac lens for this build; 2) would the woodgrain bezel be modified to accept the s/w dial; 3) 80 lb oil gauge; 4) tach harness and s/w harness included? Thanks, Pete

1) was planning on using a new reproduction lens but will try to source a nice original if you prefer.
2)I can install the adjuster on the woodgrain bezel
3) yes, 80lb
4) correct style repro tach and original tested s/w harness and buzzer included

VA72C10 · 06-23-2012, 02:15 PM

Quote:

Originally Posted by tr69c10

I need a buzzer any extras
Posted via Mobile Device

only if someone doesn't want one as part of the deal. I have three s/w dashes I will be restoring and selling and 3 wiring/buzzer setups right now...

**DeadheadNM** · 06-23-2012, 02:21 PM

Jonathan thanks for the reply. The setup I'd be interested in would have gauges, lens, and printed circuit all nice OEM. Would prefer OEM wiring as well. Curious if you have all these OEM pieces and if so total shipped. Pete

VA72C10 · 06-23-2012, 02:40 PM

Quote:

Originally Posted by DeadheadNM

Jonathan thanks for the reply. The setup I'd be interested in would have gauges, lens, and printed circuit all nice OEM. Would prefer OEM wiring as well. Curious if you have all these OEM pieces and if so total shipped. Pete

I will put a wtb for the lens and check with a couple other sources. I have everything else right now. Price would be 750 shipped.

**DeadheadNM** · 06-23-2012, 02:53 PM

Jonathan - If you can build it with all OEM (nice) restored gauges including your best sw face, OEM printed circuit, original tach tin, OEM buzzer/harnesses for the tach and sw, all screwed to a wood grain bezel for $750 shipped I will take it pending pics of the parts. If a nice OEM lens can be located - great but not a deal breaker. I'll pony up half up front then half when complete. I'm striving for all possible OEM components in my builds. Thanks, Pete

VA72C10 · 06-23-2012, 03:43 PM

Quote:

Originally Posted by DeadheadNM

Jonathan - If you can build it with all OEM (nice) restored gauges including your best sw face, OEM printed circuit, original tach tin, OEM buzzer/harnesses for the tach and sw, all screwed to a wood grain bezel for $750 shipped I will take it pending pics of the parts. If a nice OEM lens can be located - great but not a deal breaker. I'll pony up half up front then half when complete. I'm striving for all possible OEM components in my builds. Thanks, Pete

The woodgrain bezels I have that are originals have some cracking on the grain. I have reproductions, but they aren't that great to be honest....they are the vinyl sticker type and the fit of the vinyl woodgrain is far from perfect.... I can get one of the nicer ones from CSM but those run 50 more than the std reproductions...

**DeadheadNM** · 06-23-2012, 03:53 PM

Quote:

Originally Posted by VA72C10

The woodgrain bezels I have that are originals have some cracking on the grain. I have reproductions, but they aren't that great to be honest....they are the vinyl sticker type and the fit of the vinyl woodgrain is far from perfect.... I can get one of the nicer ones from CSM but those run 50 more than the std reproductions...

Yeah, I was expecting a repro woodgrain bezel. I may have a better US made wood overlay. How much time would a bezel from CSM add to your build?

VA72C10 · 06-23-2012, 04:44 PM

Quote:

Originally Posted by DeadheadNM

Yeah, I was expecting a repro woodgrain bezel. I may have a better US made wood overlay. How much time would a bezel from CSM add to your build?

I will confirm on monday but probably only an extra week.

You could get the matching glovebox door at the same time for 95 extra...

**DeadheadNM** · 06-23-2012, 05:04 PM

Quote:

Originally Posted by VA72C10

I will confirm on monday but probably only an extra week.

You could get the matching glovebox door at the same time for 95 extra...

Definitely interested. Sounds like $750 shipped for the cluster as I've described plus $145 for a wood grain bezel and glovebox door (woodgrain applied to the aluminum panel - not whole door) from CSM. Correct?

If so, lets see some pics of the cluster components when possible. Thanks, Pete

70LonghornCST · 06-23-2012, 05:40 PM

Nice Buy!

liftmeup · 06-29-2012, 09:15 PM

wow

VA72C10 · 07-11-2012, 12:05 PM

Quote:

Originally Posted by DeadheadNM

Definitely interested. Sounds like $750 shipped for the cluster as I've described plus $145 for a wood grain bezel and glovebox door (woodgrain applied to the aluminum panel - not whole door) from CSM. Correct?

If so, lets see some pics of the cluster components when possible. Thanks, Pete

got last of the parts in last night. Will take pictures this evening.

06-03-2012, 04:06 AM	#1
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Speedwarning tach dash with wiring and buzzer choose your options!!! I am putting together a speedwarning dash with tach in it right now. Have a few options so wanted to offer them before completing... Can be factory (nice) tach or new aftermarket Nice original or new lens In the extra hole I can install vac, air pressure, (both are nice originals) or a clock. OR... Can install a new 8K tach...only option at that point is for a clock in the extra hole as the lens for the 8K doesn't come with a provision for vac or air... 650 shipped for the s/w tach setup with good wiring and buzzer and new bezel of your choice (black or woodgrain) 750 shipped with the air pressure or vacuum gauges 775 shipped with the clock 800 shipped with an 8K rpm tach and open gauge spot like most tach dashes 925 shipped with an 8K rpm tach and a clock in the extra spot. Payment required in advance of me building. Will be a 1-2 week estimated turn-around paypal (as personal (payment owed) or w/ 3% fees added) or check/postal money order...or cash in person Will post pictures of the actual s/w head and buzzer setup I will be using for this dash tomorrow. head's as nice as you will find... __________________ Looking for a 67-72 swb or blazer project in or around VA. Last edited by VA72C10; 06-10-2012 at 11:41 AM.

06-03-2012, 07:59 PM	#2
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Speedwarning tach dash with wiring and buzzer choose your options!!! ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-05-2012, 02:31 PM	#3
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Speedwarning tach dash with wiring and buzzer choose your options!!! ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-06-2012, 04:48 AM	#4
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Speedwarning tach dash with wiring and buzzer choose your options!!! ttt.... __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-07-2012, 02:06 AM	#5
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Speedwarning tach dash with wiring and buzzer choose your options!!! ttt.... __________________ Looking for a 67-72 swb or blazer project in or around VA. Last edited by VA72C10; 08-20-2012 at 12:50 AM.

06-09-2012, 01:02 AM	#6
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Speedwarning tach dash with wiring and buzzer choose your options!!! ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-10-2012, 11:42 AM	#7
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Speedwarning tach dash with wiring and buzzer choose your options!!! Prices reduced. Posted via Mobile Device __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-13-2012, 04:14 AM	#8
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Speedwarning tach dash with wiring and buzzer choose your options!!! ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-13-2012, 11:34 PM	#9
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Speedwarning tach dash with wiring and buzzer choose your options!!! ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-22-2012, 05:55 PM	#10
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Speedwarning tach dash with wiring and buzzer choose your options!!! ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-22-2012, 06:45 PM	#11
Tinkermc Registered User Join Date: Jul 2011 Location: Farmville, Va Posts: 3,026	Re: Speedwarning tach dash with wiring and buzzer choose your options!!! ttt

06-22-2012, 07:54 PM	#12
tr69c10 Registered User Join Date: Feb 2008 Location: bellflower ca Posts: 370	Re: Speedwarning tach dash with wiring and buzzer choose your options!!! I need a buzzer any extras Posted via Mobile Device

06-23-2012, 11:29 AM	#13
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,483	Re: Speedwarning tach dash with wiring and buzzer choose your options!!! Tempting - 1) do you happen to have an OEM tach/vac lens for this build; 2) would the woodgrain bezel be modified to accept the s/w dial; 3) 80 lb oil gauge; 4) tach harness and s/w harness included? Thanks, Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

06-23-2012, 02:21 PM	#16
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,483	Re: Speedwarning tach dash with wiring and buzzer choose your options!!! Jonathan thanks for the reply. The setup I'd be interested in would have gauges, lens, and printed circuit all nice OEM. Would prefer OEM wiring as well. Curious if you have all these OEM pieces and if so total shipped. Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

06-23-2012, 02:53 PM	#18
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,483	Re: Speedwarning tach dash with wiring and buzzer choose your options!!! Jonathan - If you can build it with all OEM (nice) restored gauges including your best sw face, OEM printed circuit, original tach tin, OEM buzzer/harnesses for the tach and sw, all screwed to a wood grain bezel for $750 shipped I will take it pending pics of the parts. If a nice OEM lens can be located - great but not a deal breaker. I'll pony up half up front then half when complete. I'm striving for all possible OEM components in my builds. Thanks, Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland



Register or Log In To remove these advertisements.

06-23-2012, 05:40 PM	#23
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: Speedwarning tach dash with wiring and buzzer choose your options!!! Nice Buy! __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

06-29-2012, 09:15 PM	#24
liftmeup Registered User Join Date: Jan 2009 Location: Pittsburg PA Posts: 246	Re: Speedwarning tach dash with wiring and buzzer choose your options!!! wow __________________ lifted, locked, rockin

Register or Log In To remove these advertisements.