AZ Two 1967 Dash harnesses for gauges and a/c - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mahanian · 12-17-2013, 08:36 PM

I have a pair of 67 dash harnesses out of Arizona trucks. I was going to make one good harness out of both because one has been cut a lot and the other I had to cut the plastic at the firewall to get it out. It's a bit of work but it will save you a good amount of money over the cost of a new one. $25 shipped for the pair

mahanian · 12-20-2013, 08:39 PM

Let's try $30 for both, good parts to repair a damaged one as well. These are the same harnesses for 1968 as well

mahanian · 12-21-2013, 06:51 PM

Here are a few pictures of the better harness, no connectors have been cut off. The ignition connector will need to be replaced because the clips broke off. This is the one that I had to cut at the firewall.

mahanian · 12-23-2013, 11:23 AM

bump

mahanian · 12-25-2013, 07:14 PM

ttt

19Chevy67C10 · 12-26-2013, 02:33 AM

Can I get a picture of what you had to cut to remove this harness? And also is this a 67 specific harness. I will take it if it isn't sawed off at the main bulk head meaning from outside to inside. I would hate to have to pull every wire out to re-install them into another good fuse block..I guess a better way to describe is I'm looking for the inside main under dash harness not cut up or ruined on the side that goes though to the firewall. I can replace the ignition part of the harness easy enough...

Thanks and Merry Christmas.

Kev.

mahanian · 12-26-2013, 12:09 PM

The last picture in post #3 shows where it was cut, which was at the bulkhead. The bolt that holds the engine harness to the dash harness at the firewall stripped out so I had to cut through it.

mahanian · 12-30-2013, 04:43 PM

I'd hate to recycle these for the copper if someone can use them, how about $25 shipped? That will cover shipping and gas to drop off the box.

mahanian · 02-14-2014, 02:03 PM

ttt

**Grumpy old man** · 02-14-2014, 02:35 PM

$20.00 shipped ? to 37918

mahanian · 02-14-2014, 03:10 PM

$25 shipped is as low as I can go

mahanian · 03-11-2014, 08:37 PM

Bump

**jabborabbo** · 03-11-2014, 08:43 PM

You wore me down. I'll take 'me for $25 shipped. Let me know how you want payment.

mahanian · 03-11-2014, 11:05 PM

PM sent

12-17-2013, 08:36 PM	#1
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Two 1967 Dash harnesses for gauges and a/c I have a pair of 67 dash harnesses out of Arizona trucks. I was going to make one good harness out of both because one has been cut a lot and the other I had to cut the plastic at the firewall to get it out. It's a bit of work but it will save you a good amount of money over the cost of a new one. $25 shipped for the pair Attached Images __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS Last edited by mahanian; 12-30-2013 at 04:43 PM.

12-20-2013, 08:39 PM	#2
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Two 1967 Dash harnesses for gauges and a/c Let's try $30 for both, good parts to repair a damaged one as well. These are the same harnesses for 1968 as well __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS Last edited by mahanian; 12-23-2013 at 11:23 AM.

12-23-2013, 11:23 AM	#4
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Two 1967 Dash harnesses for gauges and a/c bump __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

12-25-2013, 07:14 PM	#5
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Two 1967 Dash harnesses for gauges and a/c ttt __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

12-26-2013, 02:33 AM	#6
19Chevy67C10 Registered User Join Date: Sep 2011 Location: At the end of the road! Posts: 282	Re: Two 1967 Dash harnesses for gauges and a/c Can I get a picture of what you had to cut to remove this harness? And also is this a 67 specific harness. I will take it if it isn't sawed off at the main bulk head meaning from outside to inside. I would hate to have to pull every wire out to re-install them into another good fuse block..I guess a better way to describe is I'm looking for the inside main under dash harness not cut up or ruined on the side that goes though to the firewall. I can replace the ignition part of the harness easy enough... Thanks and Merry Christmas. Kev. __________________ Kev's-C-10

12-21-2013, 06:51 PM	#3
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Two 1967 Dash harnesses for gauges and a/c Here are a few pictures of the better harness, no connectors have been cut off. The ignition connector will need to be replaced because the clips broke off. This is the one that I had to cut at the firewall. Attached Images __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

12-26-2013, 12:09 PM	#7
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Two 1967 Dash harnesses for gauges and a/c The last picture in post #3 shows where it was cut, which was at the bulkhead. The bolt that holds the engine harness to the dash harness at the firewall stripped out so I had to cut through it. __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

12-30-2013, 04:43 PM	#8
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Two 1967 Dash harnesses for gauges and a/c I'd hate to recycle these for the copper if someone can use them, how about $25 shipped? That will cover shipping and gas to drop off the box. __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

02-14-2014, 02:03 PM	#9
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Two 1967 Dash harnesses for gauges and a/c ttt __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

02-14-2014, 02:35 PM	#10
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: Two 1967 Dash harnesses for gauges and a/c $20.00 shipped ? to 37918

02-14-2014, 03:10 PM	#11
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Two 1967 Dash harnesses for gauges and a/c $25 shipped is as low as I can go __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

03-11-2014, 08:37 PM	#12
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Two 1967 Dash harnesses for gauges and a/c Bump __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

03-11-2014, 08:43 PM	#13
jabborabbo Senior Member Join Date: Apr 2013 Location: Podunk, Texas Posts: 776	Re: Two 1967 Dash harnesses for gauges and a/c You wore me down. I'll take 'me for $25 shipped. Let me know how you want payment.

03-11-2014, 11:05 PM	#14
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Two 1967 Dash harnesses for gauges and a/c PM sent __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.