Polishing the C50's 22.5 rims - The 1947 - Present Chevrolet & GMC Truck Message Board Network

colgad · 11-12-2014, 09:38 PM

Gottattooz paid me a visit today and polished all of my 22.5 Alcoa rims.
What a difference hard work makes! You can tell the amount of work is proportional to how dirty you get. What a guy!

His Dad Spyder hung out too and watched the exciting job of me drilling holes in 1/2" steel.

Worked on my shortened (10" shorter)front axle making spring plates to hold my reconditioned springs. Moved from 8 leafs to 3. Hopefully I can mount those shiny rims on my axle next week.

Yes in the middle of the last pic is crazy Gottattooz

Roostboy102 · 11-12-2014, 09:47 PM

No wonder he knows how to do that, he works at flying j!

colgad · 11-12-2014, 09:49 PM

A few more pics from todays polishing and drilling.
Thanks again so much to Josh for all of the hard work.
Sill looking for bushmaster fender flares or C40-70 front fenders to cover the super singles

Mr Handy · 11-12-2014, 10:02 PM

looks awesome!
I got a little dirty after work as well, picked up a few wire wheels for the angle grinder and went to town on the under coat on my inner fender... one down one to go.

I can't wait to see that big truck on the road!

colgad · 11-12-2014, 10:12 PM

How do the wire wheels work on the undercoating? I have always used a propane torch and a putty knife.

buglady52 · 11-12-2014, 10:53 PM

Josh sure did a great polishing job!

Mr Handy · 11-12-2014, 10:54 PM

Twisted wire wheel made short work of it... also distributed it all over my garage... I think I will be sweeping it up for a few days.

I think I will be doing the other fender outside...

colgad · 11-12-2014, 11:40 PM

Good to know, I need to do my fronts

gottattooz · 11-12-2014, 11:46 PM

[quote Yes in the middle of the last pic is crazy Gottattooz[/QUOTE]

Hey!! I resemble that remark.

Quote:

Originally Posted by Roostboy102

No wonder he knows how to do that, he works at flying j!

I am a Diesel mechanic, but not for the Flying J. My dad was a fuel tanker driver for them, and those are his coveralls.

Quote:

Originally Posted by buglady52

Josh sure did a great polishing job!

Thanks, Gloria.

-Josh

colgad · 11-13-2014, 10:38 PM

Thanks it Jesse I got my 275-70-22.5 tires mounted today. Need a few more days to get the axle back under the C50.

gottattooz · 11-13-2014, 11:09 PM

Looks good, Dave.

-Josh

11-12-2014, 09:38 PM	#1
colgad Registered User Join Date: Jun 2006 Location: Lutz, Florida Posts: 838	Polishing the C50's 22.5 rims Gottattooz paid me a visit today and polished all of my 22.5 Alcoa rims. What a difference hard work makes! You can tell the amount of work is proportional to how dirty you get. What a guy! His Dad Spyder hung out too and watched the exciting job of me drilling holes in 1/2" steel. Worked on my shortened (10" shorter)front axle making spring plates to hold my reconditioned springs. Moved from 8 leafs to 3. Hopefully I can mount those shiny rims on my axle next week. Yes in the middle of the last pic is crazy Gottattooz Attached Images __________________ 1967 Red, C10 Short Bed 6.0L T5 5 speed 1967 Orange and Black C50 6.2 Detroit Diesel NV4500, 2 Ton Pickup 1972 White, Chevy Blazer 2WD 67 Dog house 5.3 4L65 2016 Power Tour LH 1955 Red-Cream, Chevrolet Nomad, restoration on hold 2004 Black, Corvette Z06 LS6 convertible (Rock solid Fun) 2011/2018 Power Tour

11-12-2014, 09:47 PM	#2
Roostboy102 Registered User Join Date: Jan 2012 Location: Amish Country Posts: 138	Re: Polishing the C50's 22.5 rims No wonder he knows how to do that, he works at flying j! __________________ 72 C10 - Multicolor, 4.8 ls, NV3500. Sold 72 K5 - Under Construction

11-12-2014, 09:49 PM	#3
colgad Registered User Join Date: Jun 2006 Location: Lutz, Florida Posts: 838	Re: Polishing the C50's 22.5 rims A few more pics from todays polishing and drilling. Thanks again so much to Josh for all of the hard work. Sill looking for bushmaster fender flares or C40-70 front fenders to cover the super singles Attached Images __________________ 1967 Red, C10 Short Bed 6.0L T5 5 speed 1967 Orange and Black C50 6.2 Detroit Diesel NV4500, 2 Ton Pickup 1972 White, Chevy Blazer 2WD 67 Dog house 5.3 4L65 2016 Power Tour LH 1955 Red-Cream, Chevrolet Nomad, restoration on hold 2004 Black, Corvette Z06 LS6 convertible (Rock solid Fun) 2011/2018 Power Tour

11-12-2014, 10:02 PM	#4
Mr Handy Registered User Join Date: Feb 2013 Location: Spring Hill, Florida Posts: 465	Re: Polishing the C50's 22.5 rims looks awesome! I got a little dirty after work as well, picked up a few wire wheels for the angle grinder and went to town on the under coat on my inner fender... one down one to go. I can't wait to see that big truck on the road!

11-12-2014, 10:12 PM	#5
colgad Registered User Join Date: Jun 2006 Location: Lutz, Florida Posts: 838	Re: Polishing the C50's 22.5 rims How do the wire wheels work on the undercoating? I have always used a propane torch and a putty knife. __________________ 1967 Red, C10 Short Bed 6.0L T5 5 speed 1967 Orange and Black C50 6.2 Detroit Diesel NV4500, 2 Ton Pickup 1972 White, Chevy Blazer 2WD 67 Dog house 5.3 4L65 2016 Power Tour LH 1955 Red-Cream, Chevrolet Nomad, restoration on hold 2004 Black, Corvette Z06 LS6 convertible (Rock solid Fun) 2011/2018 Power Tour

11-12-2014, 10:53 PM	#6
buglady52 Registered User Join Date: Nov 2013 Location: Lutz Posts: 7	Re: Polishing the C50's 22.5 rims Josh sure did a great polishing job!

11-12-2014, 10:54 PM	#7
Mr Handy Registered User Join Date: Feb 2013 Location: Spring Hill, Florida Posts: 465	Re: Polishing the C50's 22.5 rims Twisted wire wheel made short work of it... also distributed it all over my garage... I think I will be sweeping it up for a few days. I think I will be doing the other fender outside...

11-12-2014, 11:40 PM	#8
colgad Registered User Join Date: Jun 2006 Location: Lutz, Florida Posts: 838	Re: Polishing the C50's 22.5 rims Good to know, I need to do my fronts __________________ 1967 Red, C10 Short Bed 6.0L T5 5 speed 1967 Orange and Black C50 6.2 Detroit Diesel NV4500, 2 Ton Pickup 1972 White, Chevy Blazer 2WD 67 Dog house 5.3 4L65 2016 Power Tour LH 1955 Red-Cream, Chevrolet Nomad, restoration on hold 2004 Black, Corvette Z06 LS6 convertible (Rock solid Fun) 2011/2018 Power Tour

11-13-2014, 10:38 PM	#10
colgad Registered User Join Date: Jun 2006 Location: Lutz, Florida Posts: 838	Re: Polishing the C50's 22.5 rims Thanks it Jesse I got my 275-70-22.5 tires mounted today. Need a few more days to get the axle back under the C50. Attached Images __________________ 1967 Red, C10 Short Bed 6.0L T5 5 speed 1967 Orange and Black C50 6.2 Detroit Diesel NV4500, 2 Ton Pickup 1972 White, Chevy Blazer 2WD 67 Dog house 5.3 4L65 2016 Power Tour LH 1955 Red-Cream, Chevrolet Nomad, restoration on hold 2004 Black, Corvette Z06 LS6 convertible (Rock solid Fun) 2011/2018 Power Tour Last edited by colgad; 11-13-2014 at 10:38 PM. Reason: typo

11-13-2014, 11:09 PM	#11
gottattooz Registered User Join Date: Apr 2008 Location: Hampton, Ga Posts: 921	Re: Polishing the C50's 22.5 rims Looks good, Dave. -Josh __________________ 1967 Buick Special wagon 1968 Jeep Wagoneer 1958 Chevy Panel Truck 2017 Suzuki M109R



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.