66 c10 with Vacuum Gauge - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Afirehawk1 · 05-03-2020, 06:53 AM

I added a vacuum gauge to the instrument cluster.
Where is the best location to connect?

**The Rocknrod** · 05-03-2020, 07:23 AM

Here's a good thread on that - http://67-72chevytrucks.com/vboard/s...d.php?t=581178

Afirehawk1 · 05-04-2020, 06:29 AM

Quote:

Originally Posted by The Rocknrod

Here's a good thread on that - http://67-72chevytrucks.com/vboard/s...d.php?t=581178

Ok so what i am reading tie it into the pcv line between the carb and master booster? The vacuum fitting is really small

LT1 Burb · 05-04-2020, 08:15 AM

Quote:

Originally Posted by Afirehawk1

Ok so what i am reading tie it into the pcv line between the carb and master booster? The vacuum fitting is really small

I will get you a picture tonight where mine is.

Afirehawk1 · 05-04-2020, 08:19 AM

Quote:

Originally Posted by LT1 Burb

I will get you a picture tonight where mine is.

Thank you

Afirehawk1 · 05-04-2020, 08:32 AM

Quote:

Originally Posted by Afirehawk1

Thank you

this may help.

I am running a 66 BBC 396 engine with a Holley 750 carb. i based it on the 66 Chevelle. so the PCV line runs between the front of the carb to the Master Booster.

i do see a hose fitting under the MSD Billet Distributor. i dont remember the valve under underneath whats its called. Vacuum Advanced Canister maybe???

LT1 Burb · 05-05-2020, 07:09 AM

Mine is plugged into a port on the Carb

Afirehawk1 · 05-17-2020, 03:48 PM

Quote:

Originally Posted by Afirehawk1

this may help.

I am running a 66 BBC 396 engine with a Holley 750 carb. i based it on the 66 Chevelle. so the PCV line runs between the front of the carb to the Master Booster.

i do see a hose fitting under the MSD Billet Distributor. i dont remember the valve under underneath whats its called. Vacuum Advanced Canister maybe???

Any idea size/diameter of the vacuum hose?

Lokin4AReason · 05-20-2020, 02:50 AM

Any foto(s) of this ?

Afirehawk1 · 05-20-2020, 08:41 AM

Quote:

Originally Posted by Lokin4AReason

Any foto(s) of this ?

I am using a factory gauge if that helps

Lokin4AReason · 06-13-2020, 11:58 AM

Nice . . . . Been looking for one of those for a bit now .

05-03-2020, 06:53 AM	#1
Afirehawk1 Registered User Join Date: Feb 2016 Location: Valrico, Florida Posts: 661	66 c10 with Vacuum Gauge I added a vacuum gauge to the instrument cluster. Where is the best location to connect?

05-03-2020, 07:23 AM	#2
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: 66 c10 with Vacuum Gauge Here's a good thread on that - http://67-72chevytrucks.com/vboard/s...d.php?t=581178 __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

05-05-2020, 07:09 AM	#7
LT1 Burb Registered User Join Date: Sep 2010 Location: Winchester Oregon, formerly Vancouver BC Posts: 2,949	Re: 66 c10 with Vacuum Gauge Mine is plugged into a port on the Carb

05-20-2020, 02:50 AM	#9
Lokin4AReason Registered User Join Date: Oct 2014 Location: somewhere . . . Posts: 976	Re: 66 c10 with Vacuum Gauge Any foto(s) of this ? __________________ dont want to hear excuses, i want to hear solution(s)

06-13-2020, 11:58 AM	#11
Lokin4AReason Registered User Join Date: Oct 2014 Location: somewhere . . . Posts: 976	Re: 66 c10 with Vacuum Gauge Nice . . . . Been looking for one of those for a bit now . __________________ dont want to hear excuses, i want to hear solution(s)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.