TN - Used Boat Anchor (307 V8) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

LUV2XCLR8 · 04-14-2006, 06:54 AM

Found out Wednesday my motor is blown (Head Gasket) if you are looking
for a Original 307 for some kind of restoration here it is, asking $100, if you
help me pull it I will give it to you for FREE, I am only keeping the A/c stuff.

qksilver · 04-14-2006, 11:23 AM

Hmmmmm

LUV2XCLR8 · 04-14-2006, 06:30 PM

Quote:

Originally Posted by qksilver

Hmmmmm

Does that mean u are interested?

72armyswbtruck · 04-14-2006, 06:52 PM

TTT for the boat anchor

BIGCHEVYMAN · 04-14-2006, 07:49 PM

were are you located?

LUV2XCLR8 · 04-14-2006, 07:58 PM

Quote:

Originally Posted by BIGCHEVYMAN

were are you located?

5 min SE of Jackson, TN

incoma · 04-14-2006, 10:14 PM

If it has power steering, I'll buy the power steering pulley from you.

LUV2XCLR8 · 04-14-2006, 10:32 PM

Quote:

Originally Posted by incoma

If it has power steering, I'll buy the power steering pulley from you.

No it doesn't, but I may have one, I'll get ya a pic tomorrow

incoma · 04-14-2006, 10:33 PM

thanks!

woodridge · 04-14-2006, 11:15 PM

Luv, was the old water pump a gm piece and do you still have or can you get it back?

LUV2XCLR8 · 04-15-2006, 06:16 AM

Quote:

Originally Posted by woodridge

Luv, was the old water pump a gm piece and do you still have or can you get it back?

Yes it was, and I will have to check and see if I still have it

*EDIT - YES I still have it and can bring it to MV if interested?

woodridge · 04-15-2006, 12:18 PM

Quote:

Originally Posted by LUV2XCLR8

Yes it was, and I will have to check and see if I still have it

*EDIT - YES I still have it and can bring it to MV if interested?

Super,you can PM me with any pertinent details.

LUV2XCLR8 · 04-17-2006, 04:26 PM

Quote:

Originally Posted by woodridge

pertinent details.

WTF does that mean

70 GMC 4x4 · 04-17-2006, 10:09 PM

I was wondering if the engine had a 2 barrel rochester on it? If so do you have it still?

thanks,
tim

woodridge · 04-18-2006, 10:43 AM

Quote:

Originally Posted by LUV2XCLR8

WTF does that mean

Such as how much.

Zumo · 04-17-2006, 03:44 PM

I have a free one in as well. Will not ship. Just the block. No heads. has spun bearing.

Brad · 04-18-2006, 11:36 AM

Seems free would be a good starter for that stroker motor that we all want to see built!!!

woodridge · 04-18-2006, 04:47 PM

Moma always told me to ask never assume.

5150 · 04-18-2006, 07:17 PM

BIGCHEVYMAN-Luv's about 2 1/2 hours from us.

Luv-Big lives about 15 minutes from me. If he interested maybe you could bring it up before MV

JRB · 04-18-2006, 07:41 PM

Do you realize you can take that 307 and bore it 1/8th of an inch and put some new slugs in it and you will effectively have a 327. I had one built like that in my 57 bigwindow. It was a great motor and with the right heads and carboration (Cam, Intake and Carb) I was getting 20MPG and it was fast. Just a thought. If I were not on the other side of the USA from you I would take it off your hands.
JRB

LUV2XCLR8 · 04-18-2006, 09:26 PM

JRB, Yes I have thought of that, but this will be (When finished someday)
a Bagged, C-notched Roadster, No top, No door glass, No rear seats, and
I am leaning towards a 4.3 V6, YES I know that is

, why be normal

JAKES 68GMC · 04-18-2006, 09:46 PM

Quote:

Originally Posted by LUV2XCLR8

JRB, Yes I have thought of that, but this will be (When finished someday)
a Bagged, C-notched Roadster, No top, No door glass, No rear seats, and
I am leaning towards a 4.3 V6, YES I know that is

, why be normal

Please don't put a 4.3 in the Roadster. That wouldn't be very classy or cool. If I were you, and I wanted to be different, I'd stuff a souped 292 in it. Lots of power and a cool sound. Just IMO. Probably would cost just as much as a 4.3.

5150 · 04-18-2006, 09:52 PM

Luv, I'm confused on the 4.3 also.

JAKES 68GMC · 04-19-2006, 09:16 AM

Hell, probably the junk 307 would run circles around a 4.3.

LUV2XCLR8 · 04-19-2006, 03:46 PM

Well, I know from your alls perspective it seems

but I am looking at
several things here, driveability, uniqueness, and of course COST

04-14-2006, 06:54 AM	#1
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	TN - Used Boat Anchor (307 V8) Found out Wednesday my motor is blown (Head Gasket) if you are looking for a Original 307 for some kind of restoration here it is, asking $100, if you help me pull it I will give it to you for FREE, I am only keeping the A/c stuff. Attached Images __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T Last edited by LUV2XCLR8; 04-14-2006 at 06:29 PM.

04-14-2006, 11:23 AM	#2
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: TN - Used Boat Anchor (307 V8) Hmmmmm

04-14-2006, 06:52 PM	#4
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,033	Re: TN - Used Boat Anchor (307 V8) TTT for the boat anchor __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

04-14-2006, 07:49 PM	#5
BIGCHEVYMAN Senior Member Join Date: Apr 2002 Location: Portland , Tennessee , United States Posts: 1,024	Re: TN - Used Boat Anchor (307 V8) were are you located?

04-14-2006, 10:14 PM	#7
incoma Registered User Join Date: Mar 2004 Location: Lexington, KY Posts: 865	Re: TN - Used Boat Anchor (307 V8) If it has power steering, I'll buy the power steering pulley from you.

04-14-2006, 10:33 PM	#9
incoma Registered User Join Date: Mar 2004 Location: Lexington, KY Posts: 865	Re: TN - Used Boat Anchor (307 V8) thanks!

04-14-2006, 11:15 PM	#10
woodridge Senior Member Join Date: Feb 2005 Location: Maynardville, Tn Posts: 3,030	Re: TN - Used Boat Anchor (307 V8) Luv, was the old water pump a gm piece and do you still have or can you get it back? __________________ SEMA Network- Protect our Hobby! 71 C30 in pieces, starting to come together. Click here for A Place For Tennessee Truck Enthusiest To Meet

04-17-2006, 10:09 PM	#14
70 GMC 4x4 Registered User Join Date: Apr 2001 Location: Marion, Iowa Posts: 126	Re: TN - Used Boat Anchor (307 V8) I was wondering if the engine had a 2 barrel rochester on it? If so do you have it still? thanks, tim __________________ 70 3/4 GMC 4x4, 400sb

04-17-2006, 03:44 PM	#16
Zumo Hot Rods For Life Join Date: Sep 2001 Location: Waxahachie, TX Posts: 3,305	Re: TN - Used Boat Anchor (307 V8) I have a free one in as well. Will not ship. Just the block. No heads. has spun bearing. __________________ 1968 C10 LWB **SOLD* Andy Viva Los Bicicletas! Los Muertos Custom Bicycles

04-18-2006, 11:36 AM	#17
Brad Out of the carpool lane. Join Date: Jan 2000 Location: Clark Co, WA Posts: 5,672	Re: TN - Used Boat Anchor (307 V8) Seems free would be a good starter for that stroker motor that we all want to see built!!! __________________ 1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten...

04-18-2006, 04:47 PM	#18
woodridge Senior Member Join Date: Feb 2005 Location: Maynardville, Tn Posts: 3,030	Re: TN - Used Boat Anchor (307 V8) Moma always told me to ask never assume. __________________ SEMA Network- Protect our Hobby! 71 C30 in pieces, starting to come together. Click here for A Place For Tennessee Truck Enthusiest To Meet

04-18-2006, 07:17 PM	#19
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: TN - Used Boat Anchor (307 V8) BIGCHEVYMAN-Luv's about 2 1/2 hours from us. Luv-Big lives about 15 minutes from me. If he interested maybe you could bring it up before MV __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

04-18-2006, 07:41 PM	#20
JRB Senior Member Join Date: Nov 2005 Location: Portland Oregon Posts: 287	Re: TN - Used Boat Anchor (307 V8) Do you realize you can take that 307 and bore it 1/8th of an inch and put some new slugs in it and you will effectively have a 327. I had one built like that in my 57 bigwindow. It was a great motor and with the right heads and carboration (Cam, Intake and Carb) I was getting 20MPG and it was fast. Just a thought. If I were not on the other side of the USA from you I would take it off your hands. JRB Last edited by JRB; 04-18-2006 at 07:42 PM.

04-18-2006, 09:26 PM	#21
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: TN - Used Boat Anchor (307 V8) JRB, Yes I have thought of that, but this will be (When finished someday) a Bagged, C-notched Roadster, No top, No door glass, No rear seats, and I am leaning towards a 4.3 V6, YES I know that is , why be normal __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

04-18-2006, 09:52 PM	#23
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: TN - Used Boat Anchor (307 V8) Luv, I'm confused on the 4.3 also. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4



Register or Log In To remove these advertisements.

04-19-2006, 09:16 AM	#24
JAKES 68GMC Aluminum slot wheels rule... Join Date: Jan 2006 Location: Maine Posts: 6,211	Re: TN - Used Boat Anchor (307 V8) Hell, probably the junk 307 would run circles around a 4.3.

04-19-2006, 03:46 PM	#25
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: TN - Used Boat Anchor (307 V8) Well, I know from your alls perspective it seems but I am looking at several things here, driveability, uniqueness, and of course COST __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.