![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Retired Air Force Veteran
![]() Join Date: Aug 2007
Location: Pembroke Pines, Florida 33024
Posts: 1,808
|
GMC Chassis and Chevy Chassis...Not The Same
Well, I've have completed a Leaf Spring Swap to a Coil Springs. Also, added a Super Track Bar and 6" Drop Coils. When installing the Coils , something was not right - they would not install straight up and down. Long story short after allot of cussing and more cussing, I decided to call someone. I called Wes from Classic Heartbeat. To sum it up, he told me that the GMC Chassis and the Chevy Chassis had a few differences. This was one of them. In the end I had to drill an extra hole and add some reinforcement for the coil install. COULD THIS BE ANOTHER CHASSIS DIFFERENCE? I am trying to install the Automatic Tranny Linkage for a Turbo 350. I see 2 holes for the Z-Bracket on the frame. But the bracket w/ the rod appears to be a few inches off. So I can't complete the install. Chassis Issue or not installing it correctly? Anyone have pics of this install? Here are the parts I am installing. The rod is 22" long and piece with the spring is on the tranny already. Sorry it's long winded. Thanks, Harry
![]() ![]()
__________________
Harry 69' SWB Step Side 1/2 Ton w/68' Front Clip Swap from Leafs to Trailing Arms (Complete) Swap 6 Lug to 5 Lug (w/ Disk Brakes in Front) 3/6 Drop ![]() Help Support The Board Click Here For Information On How To Subscribe Krue's FAQ Page Vendors |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|