![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Jul 2009
Location: Pottsville Pa
Posts: 19
|
bad cab mounts on the frame help!
Can i buy new cab mounts for my frame or do i try to make new ones?
|
![]() |
![]() |
![]() |
#2 |
1965 Chevy C10, 2005 4.8L/4l60
![]() Join Date: Aug 2004
Location: DFW Texas
Posts: 8,543
|
Re: bad cab mounts on the frame help!
You can make some, you can also buy some from guys here that will cut the rivets off of a parts truck they have and send them to you. LilRed might be able to help
__________________
Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 ![]() ![]() ![]() support our troops! Last edited by Clyde65; 11-18-2009 at 06:03 PM. |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Apr 2008
Location: Sabattus, Maine
Posts: 84
|
Re: bad cab mounts on the frame help!
Yeah, Brothers has them you can buy them in pairs, and get only the ones you need. They became available after I called around and got a set out a boneyard in California.
Navysnipe |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jul 2009
Location: Pottsville Pa
Posts: 19
|
Re: bad cab mounts on the frame help!
are the mounts the same as the 67's
|
![]() |
![]() |
![]() |
#5 |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,247
|
Re: bad cab mounts on the frame help!
Which mounts are you referring to, front or back, and what year of truck has the bad mounts? The rear mounts on a '67 are different than the rears on a '63-'66. I'm not sure about the fronts, I'd have to check.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,977
|
Re: bad cab mounts on the frame help!
Rears are different (6x-66's are higher vs. 67-72's); the fronts are close enough to swap but the spacing on the rivet holes is different for the side of the frame.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
![]() |
![]() |
![]() |
#7 |
Account Suspended
Join Date: May 2005
Location: Kansas City, KS
Posts: 3,906
|
Re: bad cab mounts on the frame help!
Are you talking about the frame perches? Cab-to-frame mounts? Cab supports? Front or rear? 1/2 ton or 3/4 ton?
All of these things make a difference in what is available aftermarket or used. I know where you can get all of the above, in good, used condition, so let me know if you are interested. Good luck with your project. |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Apr 2009
Location: Butler,Pa.
Posts: 70
|
Re: bad cab mounts on the frame help!
Try parker Metal Products near PittsburghPa. Actually in Tarentum off of Rt 366,bought alot of sheetmetal there and they will bend you anything .I don't know if they ship.
|
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Jul 2009
Location: Pottsville Pa
Posts: 19
|
Re: bad cab mounts on the frame help!
the truck i have is a 66 c10 and all the cab mounts that are riveted to the frame are bad. what do i do
|
![]() |
![]() |
![]() |
#10 |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,247
|
Re: bad cab mounts on the frame help!
Are just the tops bad.....where the mounts set? If so then If you can't find some good used oned to replace them, then just replace the top part. Do you have a way to weld? Most any welding/fabrication shop should be able to make the pieces for you (I know I could) as long as you provide them with either dimensions or patterns. Once you have your new pieces, cut out the bad part, and weld in the new pieces
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Apr 2009
Location: Butler,Pa.
Posts: 70
|
Re: bad cab mounts on the frame help!
Again Parker Metal sells a universal frame to body mount with bushings included,used them on other s before,just nee to fab alittle.If you need the number,let me know.
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|