1964 C-10 Build - The 1947 - Present Chevrolet & GMC Truck Message Board Network

pezls1 · 03-23-2010, 05:22 PM

Well it's a long story. I have had this truck for 20 years, my dad bought it for me when I was 14. This year I have begun to work on it again after several years away from it. Life's distractions and a lack of patience has been the reason why I have never finished the truck. Progress pictures prior to these are stored on disc somewhere and I'm not looking for them. So we will start from this point and move forward at a steady, even pace and finally see this project through to it's completion. So follow along if you like. It will be a slow ride but we'll get there eventually.

I decided I had to have a smooth firewall so here it is all welded in with filler almost finished.

pezls1 · 03-23-2010, 05:29 PM

And another.........

pezls1 · 03-23-2010, 05:31 PM

How 'bout a little '59-'60 dash action!

Bam!

pezls1 · 03-23-2010, 05:41 PM

I guess technically it's not progress but here's some parts I picked up today. Met a guy in Syracuse for them.

**DPowers** · 03-23-2010, 05:49 PM

Welcome...Looks good- what are the plans?

pezls1 · 03-23-2010, 06:21 PM

Lowered not sure if I'm going to go airride or not, still thinking about it. I've got a 350 but maybe a 396. You can't beat a big block. I've got a mid-eighties frame I am going to use w/ a 12 bolt rear. It's just going to be a driver but nice. Oh and the paint..........black suede. I did like flat black but that has gotten played out over the last few years. And AR Salt Flat Specials w/ knock-offs.

**DPowers** · 03-23-2010, 10:27 PM

Mid-80's frame is going to be a challenge due to the kick-up behind the cab...

pezls1 · 03-24-2010, 08:34 PM

Not too worried about it yet.

jason65 · 03-25-2010, 07:54 AM

Looks good. How did that new door fit?

**Chevy Fleetside** · 03-25-2010, 11:16 AM

If you can use a suburban frame then there is not kick up just a straight frame.

pezls1 · 03-25-2010, 05:18 PM

True. Maybe I should rethink my options. I really don't want to have to raise the floor of the bed. We'll see. The new door didn't fit too bad actually. The forward corner required some massaging.

pezls1 · 03-26-2010, 07:25 PM

Here's my progress from the past week:

Firewall, dash and most of the floor primed.

ruffrida2005 · 03-26-2010, 08:52 PM

Cab looks good. What's wrong with the 64 Frame?

pezls1 · 03-26-2010, 09:17 PM

Never had one. We bought it as a cab and chasis with all the rest of the truck in pieces.

markeb01 · 03-27-2010, 12:11 AM

Love the dashboard, my favorite. The install looks perfect. Often they aren't fitted correctly, or the gauges are set at an odd angle, etc. Nice to see the project is again receiving attention.

pezls1 · 03-27-2010, 01:13 PM

Thanks. I have noticed that myself so a lot of time was spent getting that dash in there just right.

Alan's Classic · 03-27-2010, 11:15 PM

Nice progress. Lookin' forward to more progress. Welcome aboard.

pezls1 · 03-28-2010, 10:02 AM

Thanks. I too am looking forward to more progress.

pezls1 · 03-30-2010, 11:41 PM

A couple shots of some stuff I cleaned up and sprayed with etching primer. I've got some amateur body work to take care of on the box side.

aggie91 · 04-09-2010, 04:19 PM

Looks good and welcome to the board. I too know about things setting to the side for too long.

pezls1 · 05-01-2010, 10:01 PM

So today I got the cab off of the dolly that it was welded to. Slid the frame under and set a spare box on it to see where I am at. Going to end up raising the floor of the box and doing some work to the frame to get the cab to sit a few inches lower.

03-23-2010, 05:22 PM	#1
pezls1 Registered User Join Date: Feb 2010 Location: Rome, N.Y. Posts: 17	1964 C-10 Build Well it's a long story. I have had this truck for 20 years, my dad bought it for me when I was 14. This year I have begun to work on it again after several years away from it. Life's distractions and a lack of patience has been the reason why I have never finished the truck. Progress pictures prior to these are stored on disc somewhere and I'm not looking for them. So we will start from this point and move forward at a steady, even pace and finally see this project through to it's completion. So follow along if you like. It will be a slow ride but we'll get there eventually. I decided I had to have a smooth firewall so here it is all welded in with filler almost finished. Attached Images Last edited by pezls1; 03-23-2010 at 05:28 PM.

03-23-2010, 05:29 PM	#2
pezls1 Registered User Join Date: Feb 2010 Location: Rome, N.Y. Posts: 17	Re: 1964 C-10 Build And another......... Attached Images

03-23-2010, 05:31 PM	#3
pezls1 Registered User Join Date: Feb 2010 Location: Rome, N.Y. Posts: 17	Re: 1964 C-10 Build How 'bout a little '59-'60 dash action! Bam! Attached Images Last edited by pezls1; 03-23-2010 at 05:32 PM.

03-23-2010, 05:41 PM	#4
pezls1 Registered User Join Date: Feb 2010 Location: Rome, N.Y. Posts: 17	Re: 1964 C-10 Build I guess technically it's not progress but here's some parts I picked up today. Met a guy in Syracuse for them. Attached Images

03-23-2010, 05:49 PM	#5
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,442	Re: 1964 C-10 Build Welcome...Looks good- what are the plans? __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

03-23-2010, 06:21 PM	#6
pezls1 Registered User Join Date: Feb 2010 Location: Rome, N.Y. Posts: 17	Re: 1964 C-10 Build Lowered not sure if I'm going to go airride or not, still thinking about it. I've got a 350 but maybe a 396. You can't beat a big block. I've got a mid-eighties frame I am going to use w/ a 12 bolt rear. It's just going to be a driver but nice. Oh and the paint..........black suede. I did like flat black but that has gotten played out over the last few years. And AR Salt Flat Specials w/ knock-offs. Attached Images Last edited by pezls1; 03-23-2010 at 06:29 PM.

03-23-2010, 10:27 PM	#7
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,442	Re: 1964 C-10 Build Mid-80's frame is going to be a challenge due to the kick-up behind the cab... __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

03-24-2010, 08:34 PM	#8
pezls1 Registered User Join Date: Feb 2010 Location: Rome, N.Y. Posts: 17	Re: 1964 C-10 Build Not too worried about it yet.

03-25-2010, 07:54 AM	#9
jason65 Registerd User Join Date: Sep 2008 Location: Oklahoma Posts: 2,118	Re: 1964 C-10 Build Looks good. How did that new door fit?

03-25-2010, 11:16 AM	#10
Chevy Fleetside Registered User Join Date: Sep 2006 Location: San Francisco Posts: 4,782	Re: 1964 C-10 Build If you can use a suburban frame then there is not kick up just a straight frame. __________________ "A man and his truck, what a beautiful thing" 65 Short Fleetside BBC 65 Long Fleetside 283 3 on the tree for now. my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536

03-25-2010, 05:18 PM	#11
pezls1 Registered User Join Date: Feb 2010 Location: Rome, N.Y. Posts: 17	Re: 1964 C-10 Build True. Maybe I should rethink my options. I really don't want to have to raise the floor of the bed. We'll see. The new door didn't fit too bad actually. The forward corner required some massaging. Last edited by pezls1; 03-25-2010 at 05:20 PM.

03-26-2010, 07:25 PM	#12
pezls1 Registered User Join Date: Feb 2010 Location: Rome, N.Y. Posts: 17	Re: 1964 C-10 Build Here's my progress from the past week: Firewall, dash and most of the floor primed. Attached Images

03-26-2010, 08:52 PM	#13
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: 1964 C-10 Build Cab looks good. What's wrong with the 64 Frame? __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

03-26-2010, 09:17 PM	#14
pezls1 Registered User Join Date: Feb 2010 Location: Rome, N.Y. Posts: 17	Re: 1964 C-10 Build Never had one. We bought it as a cab and chasis with all the rest of the truck in pieces.

03-27-2010, 12:11 AM	#15
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: 1964 C-10 Build Love the dashboard, my favorite. The install looks perfect. Often they aren't fitted correctly, or the gauges are set at an odd angle, etc. Nice to see the project is again receiving attention.



Register or Log In To remove these advertisements.

03-27-2010, 01:13 PM	#16
pezls1 Registered User Join Date: Feb 2010 Location: Rome, N.Y. Posts: 17	Re: 1964 C-10 Build Thanks. I have noticed that myself so a lot of time was spent getting that dash in there just right.

03-27-2010, 11:15 PM	#17
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: 1964 C-10 Build Nice progress. Lookin' forward to more progress. Welcome aboard. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

03-28-2010, 10:02 AM	#18
pezls1 Registered User Join Date: Feb 2010 Location: Rome, N.Y. Posts: 17	Re: 1964 C-10 Build Thanks. I too am looking forward to more progress.

03-30-2010, 11:41 PM	#19
pezls1 Registered User Join Date: Feb 2010 Location: Rome, N.Y. Posts: 17	Re: 1964 C-10 Build A couple shots of some stuff I cleaned up and sprayed with etching primer. I've got some amateur body work to take care of on the box side. Attached Images

04-09-2010, 04:19 PM	#20
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: 1964 C-10 Build Looks good and welcome to the board. I too know about things setting to the side for too long. __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

05-01-2010, 10:01 PM	#21
pezls1 Registered User Join Date: Feb 2010 Location: Rome, N.Y. Posts: 17	Re: 1964 C-10 Build So today I got the cab off of the dolly that it was welded to. Slid the frame under and set a spare box on it to see where I am at. Going to end up raising the floor of the box and doing some work to the frame to get the cab to sit a few inches lower. Attached Images

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.