|
|
|
05-28-2001, 02:44 PM
|
#1 |
|
Registered User
Join Date: May 2001
Location: Portland, Or.
Posts: 49
|
56 inch rear springs?
Can someone please tell me if the locating pin is in the center of the 56 inch rear springs? Also,anyone know what the spring rate is for these? Thanks
__________________
68 Chevy cst 4x4,now a short bed. 383 stroker small block, 4 speed grinder and 205,6 inch lift,4:56 gears with limited slip and lockright. Warn 8000 winch and pep boys cup holders.... |
|
|
|
05-28-2001, 04:44 PM
|
#2 |
|
Registered User
Join Date: May 2001
Posts: 8
|
i think the front mount stays in the same location on the 56s and the rear gets moved back.
|
|
|
|
|
05-28-2001, 07:09 PM
|
#3 |
|
You get what you pay for
 
Join Date: Dec 1999
Location: Cherryville, NC
Posts: 4,798
|
Nope,
the shackle stays put and the hanger is different. On a 52" spring the axle locating pin is in the center (26" either way). On a 56" spring it is 26" from rear and 30" from front. ------------------ Mike 1985 Chevy C-10 Mike's 73-87 Chevy Pickup Site [This message has been edited by swervin ervin (edited 05-28-2001).]
__________________
Mike 1985 Chevy C-10 |
|
|
|
|
05-28-2001, 08:42 PM
|
#4 |
|
Web Wheeler
Join Date: Jan 2000
Location: BC, Canada, eh?
Posts: 388
|
You sure Ervin?
My 1-ton measures 26" from front eye to pin, and 30" from pin to rear eye.
__________________
'66 C10 longstep - Clifford equiped '84 C20 Suburban 6.2L - awaiting 4x4 conversion '91 V3500 Crewcab - awaiting diesel swap |
|
|
|
|
05-28-2001, 11:04 PM
|
#5 |
|
You get what you pay for
Join Date: Dec 1999
Location: Cherryville, NC
Posts: 4,798
|
Whoops! Excuse my dumbness. U2 you are correct. I have been through so much lately with my leaf springs I turned it around in my mind.
Anyway, the pin's not in the center. I'll be OK, I think. ------------------ Mike 1985 Chevy C-10 Mike's 73-87 Chevy Pickup Site
__________________
Mike 1985 Chevy C-10 |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
