will this work - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jojoman · 03-11-2011, 12:06 AM

i got a 87 no tbi just carb will this intake work on it or no if not what should i go withhttp://www.summitracing.com/parts/EDL-7501 thanks and what wires and plugs are you running

texasbigbear_wink · 03-11-2011, 12:11 AM

Yep It should work. I run AC Delco plugs they work the best on chevy's do nut run bosh they are crap. Plug wires well just depends on what all mods you are doing.

jojoman · 03-11-2011, 12:18 AM

i just got everything stock i think has a mild cam headers that pretty much it so it should work then huh

texasbigbear_wink · 03-11-2011, 12:38 AM

It should but there are guys on here allot smarter than me and if I was you I would wait on a second opinion before making any purchases.

jojoman · 03-11-2011, 12:39 AM

im going with this i think it should be good http://www.summitracing.com/parts/EDL-2604/

texasbigbear_wink · 03-11-2011, 12:48 AM

Yep
http://s1210.photobucket.com/albums/...exasbigbear21/

jojoman · 03-11-2011, 08:23 PM

where did you find those valve covers

texasbigbear_wink · 03-11-2011, 08:32 PM

http://www.summitracing.com/parts/SUM-G3309/
They are heavy duty to. The pic's of them on are on the photobucket link now.

jojoman · 03-11-2011, 08:47 PM

you suggest buying new bolts or no if so which ones should i buy

texasbigbear_wink · 03-11-2011, 10:19 PM

This is the ones I got and yes if your are going with chrome valve covers than I would get these chrome blots.

http://www.summitracing.com/parts/TRD-9812/

joe231 · 03-11-2011, 10:37 PM

Jojoman,
What heads do you have?
Posted via Mobile Device

jojoman · 03-13-2011, 08:14 PM

i got tbi heads on carb no tbibut i seen this thing about 23 degree heads i dont know what those are i dont think i got those i called this place here and they told me a air gap intake wouldnt be good for my motor since it idle high that what they said

joe231 · 03-13-2011, 09:14 PM

If you have TBI heads, you should have center bolt valve covers and the 2 center intake bolt holes are drilled at a different angle than older carb heads.
Posted via Mobile Device

jojoman · 03-13-2011, 09:31 PM

yea they drilled straight down instead of being angled i believe so what do you recommend

jojoman · 03-13-2011, 10:01 PM

which one do you guys recommend motor just stock mild cam headers right now has single plane intake http://www.summitracing.com/search/D.../?Ns=Price|Asc

mooseknuckles · 03-13-2011, 10:53 PM

edelbrock performer

joe231 · 03-13-2011, 09:59 PM

You will either need an intake to fit the TBI heads or you will need to modify a standard intake. What intake do you have now?
Posted via Mobile Device

03-11-2011, 12:06 AM	#1
jojoman Registered User Join Date: Jul 2010 Location: Houston,Tx. Posts: 241	will this work i got a 87 no tbi just carb will this intake work on it or no if not what should i go withhttp://www.summitracing.com/parts/EDL-7501 thanks and what wires and plugs are you running

03-11-2011, 12:11 AM	#2
texasbigbear_wink Registered User Join Date: Oct 2009 Location: Texas Ellis county Posts: 134	Re: will this work Yep It should work. I run AC Delco plugs they work the best on chevy's do nut run bosh they are crap. Plug wires well just depends on what all mods you are doing. __________________ 87 Chevy R10 LB 02 Nissan Sentra GXE

03-11-2011, 12:18 AM	#3
jojoman Registered User Join Date: Jul 2010 Location: Houston,Tx. Posts: 241	Re: will this work i just got everything stock i think has a mild cam headers that pretty much it so it should work then huh

03-11-2011, 12:38 AM	#4
texasbigbear_wink Registered User Join Date: Oct 2009 Location: Texas Ellis county Posts: 134	Re: will this work It should but there are guys on here allot smarter than me and if I was you I would wait on a second opinion before making any purchases. __________________ 87 Chevy R10 LB 02 Nissan Sentra GXE Last edited by texasbigbear_wink; 03-11-2011 at 12:38 AM.

03-11-2011, 12:39 AM	#5
jojoman Registered User Join Date: Jul 2010 Location: Houston,Tx. Posts: 241	Re: will this work im going with this i think it should be good http://www.summitracing.com/parts/EDL-2604/

03-11-2011, 12:48 AM	#6
texasbigbear_wink Registered User Join Date: Oct 2009 Location: Texas Ellis county Posts: 134	Re: will this work Yep http://s1210.photobucket.com/albums/...exasbigbear21/ __________________ 87 Chevy R10 LB 02 Nissan Sentra GXE

03-11-2011, 08:23 PM	#7
jojoman Registered User Join Date: Jul 2010 Location: Houston,Tx. Posts: 241	Re: will this work where did you find those valve covers

03-11-2011, 08:32 PM	#8
texasbigbear_wink Registered User Join Date: Oct 2009 Location: Texas Ellis county Posts: 134	Re: will this work http://www.summitracing.com/parts/SUM-G3309/ They are heavy duty to. The pic's of them on are on the photobucket link now. __________________ 87 Chevy R10 LB 02 Nissan Sentra GXE Last edited by texasbigbear_wink; 03-11-2011 at 08:36 PM.

03-11-2011, 08:47 PM	#9
jojoman Registered User Join Date: Jul 2010 Location: Houston,Tx. Posts: 241	Re: will this work you suggest buying new bolts or no if so which ones should i buy

03-11-2011, 10:19 PM	#10
texasbigbear_wink Registered User Join Date: Oct 2009 Location: Texas Ellis county Posts: 134	Re: will this work This is the ones I got and yes if your are going with chrome valve covers than I would get these chrome blots. http://www.summitracing.com/parts/TRD-9812/ __________________ 87 Chevy R10 LB 02 Nissan Sentra GXE

03-11-2011, 10:37 PM	#11
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: will this work Jojoman, What heads do you have? Posted via Mobile Device __________________ *CHEVY ONLY*

03-13-2011, 08:14 PM	#12
jojoman Registered User Join Date: Jul 2010 Location: Houston,Tx. Posts: 241	Re: will this work i got tbi heads on carb no tbibut i seen this thing about 23 degree heads i dont know what those are i dont think i got those i called this place here and they told me a air gap intake wouldnt be good for my motor since it idle high that what they said

03-13-2011, 09:14 PM	#13
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: will this work If you have TBI heads, you should have center bolt valve covers and the 2 center intake bolt holes are drilled at a different angle than older carb heads. Posted via Mobile Device __________________ *CHEVY ONLY*

03-13-2011, 09:31 PM	#14
jojoman Registered User Join Date: Jul 2010 Location: Houston,Tx. Posts: 241	Re: will this work yea they drilled straight down instead of being angled i believe so what do you recommend

03-13-2011, 10:01 PM	#15
jojoman Registered User Join Date: Jul 2010 Location: Houston,Tx. Posts: 241	Re: will this work which one do you guys recommend motor just stock mild cam headers right now has single plane intake http://www.summitracing.com/search/D.../?Ns=Price\|Asc



Register or Log In To remove these advertisements.

03-13-2011, 10:53 PM	#16
mooseknuckles Registered User Join Date: Sep 2009 Location: ottawa,canada Posts: 4,550	Re: will this work edelbrock performer __________________ my build threads '86 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415628 '67 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=635078 '63 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=674682

03-13-2011, 09:59 PM	#17
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: will this work You will either need an intake to fit the TBI heads or you will need to modify a standard intake. What intake do you have now? Posted via Mobile Device __________________ *CHEVY ONLY*

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.