Rustoleum Paint job? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

klwebb · 12-09-2015, 02:08 PM

Looking to get new color on my truck. Im not worried at ALL about messing up the current crap paint job. Its mainly green with a red fender and a white hood. Ive seen a few stories of people painting their cars for less than $100 and ill have that WAY sooner than ill have a few k to spend on a real paint job. Opinions?

**Grumpy old man** · 12-09-2015, 02:30 PM

Tractor supply I use the Matte black on my frames and it works great !

http://www.tractorsupply.com/tsc/pro...k?cm_vc=-10005

wreckedchevy · 12-09-2015, 03:28 PM

Quote:

Originally Posted by Grumpy old man

Tractor supply I use the Matte black on my frames and it works great !

http://www.tractorsupply.com/tsc/pro...k?cm_vc=-10005

just as an experiment I used the high gloss black on my frame horns and inner fender wells with pretty much no prep it's held on for 2 years now. I was going to use it on that bed I built but my buddy donated some paint at the end. I have heard that the tractor supply stuff doesn't hold up to the sun very well though. lots of info on the tractor forums out there

Kennuck · 12-09-2015, 03:03 PM

https://www.youtube.com/watch?v=_qPJTTRWttQ

Hook'em · 12-09-2015, 04:04 PM

Quote:

Originally Posted by Kennuck

https://www.youtube.com/watch?v=_qPJTTRWttQ

That is pretty impressive.

F.A.A.benny · 12-09-2015, 03:12 PM

Quite a bit of youtube videos about it

Zappafan · 12-09-2015, 03:23 PM

I did a satin black roller paint job on my budget 72 GMC and it looked okay. A lot better than the existing paint.

**SoCoC10** · 12-09-2015, 03:27 PM

Go to Home Depot and buy a $40 spray gun. Pepboys has paint in gallons or use the gallon of Rustoleum flat black and add a quart of gloss black for a nice satin black.

klwebb · 12-10-2015, 01:08 AM

Anyone ever do it straight out of a spray can?

**68bowtie** · 12-10-2015, 01:21 AM

Quote:

Originally Posted by klwebb

Anyone ever do it straight out of a spray can?

probably shouldn't admit to this... but when i was in college i painted my 1990 k20 with krylon rattle cans in the dorm parking lot. just did a little buffing with a scotchbrite on my drill, taped it off and went to town. i even did two tone! the meter maid drove by while i was in mid spray with 10 pounds of newspaper all over. she stopped her golf cart. stared for a minute. shook her head and drove off. those were the good old days. oh and i thought it turned out pretty good. didn't look quite like a real paint job but most people wouldn't know it was spray paint. it held up really well for several years til i sold it. my $100 paint job was appropriate for me and my $1,000 truck.

bill3rail · 12-10-2015, 09:07 AM

Quote:

Originally Posted by klwebb

Anyone ever do it straight out of a spray can?

My neighbor did it with a spray can.
I painted a F*rd E150 with a roller years ago, using Benjamin Moore oil based exterior house paint. It looked much better than when I bought it.
Bill

**Grumpy old man** · 12-11-2015, 09:58 AM

Tractor supply matte black .

http://

Felino · 12-10-2015, 06:18 AM

nice thread

73737373 · 12-11-2015, 11:41 AM

I use Rustoleum semi-gloss black rattle can on frame parts, inner fender wells, brackets, radiator support etc. As w/most paint work, the key is in the prep; even average paint will do well on clean, dry rust/grease free surfaces.

eastxbbqman · 12-11-2015, 12:10 PM

When your truck is 6 colors and your broke, it is the way to go. I had green, white, maroon, grey, primer red, and black on mine. It looks better, but the dream is still a quality paint job.

Ft.ValloniaStreaker · 12-11-2015, 01:05 PM

OK, now don't laugh to hard. When I lost my shop in the divorce i needed to keep my bed from rusting so...I used a rattle can in each hand and came up with this

12-09-2015, 02:08 PM	#1
klwebb Registered User Join Date: Aug 2015 Location: Gilbert,AZ Posts: 90	Rustoleum Paint job? Looking to get new color on my truck. Im not worried at ALL about messing up the current crap paint job. Its mainly green with a red fender and a white hood. Ive seen a few stories of people painting their cars for less than $100 and ill have that WAY sooner than ill have a few k to spend on a real paint job. Opinions? __________________ 18 year old girl who loves old trucks •Previous Projects• 1971 c10 longbed 350/350 1977 Silverado longbed 350/350 1978 K10 shortbed 350/t400 lifted 6 inches on 33s "LONGBED LIVES MATTER"

12-09-2015, 02:30 PM	#2
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: Rustoleum Paint job? Tractor supply I use the Matte black on my frames and it works great ! http://www.tractorsupply.com/tsc/pro...k?cm_vc=-10005

12-09-2015, 03:03 PM	#4
Kennuck Registered User Join Date: Oct 2013 Location: Dresden, Ontario Posts: 647	Re: Rustoleum Paint job? https://www.youtube.com/watch?v=_qPJTTRWttQ __________________ 1970 Short Wide 5.3 4L60E BlackBear tune 3:73 gears, Boyd's Tank 2.5 / 4 drop 5 lug disc brakes Vintage Air 18x8 Ridlers 255/55 frt. 18x9.5 275/60 rear

12-09-2015, 03:12 PM	#6
F.A.A.benny Registered User Join Date: Jul 2015 Location: Euless, Tx Posts: 431	Re: Rustoleum Paint job? Quite a bit of youtube videos about it

12-09-2015, 03:23 PM	#7
Zappafan Registered User Join Date: Jan 2008 Location: Sidney, British Columbia Posts: 104	Re: Rustoleum Paint job? I did a satin black roller paint job on my budget 72 GMC and it looked okay. A lot better than the existing paint.

12-09-2015, 03:27 PM	#8
SoCoC10 Senior Member Join Date: Nov 2014 Location: Colorado Posts: 3,303	Re: Rustoleum Paint job? Go to Home Depot and buy a $40 spray gun. Pepboys has paint in gallons or use the gallon of Rustoleum flat black and add a quart of gloss black for a nice satin black. __________________ 07' Extcab Silverado Z71 Silver Birch, 5.3L HO 71' Cheyenne C10 Hugger Orange on Saddle SWB Besides these two, too Many to count

12-10-2015, 01:08 AM	#9
klwebb Registered User Join Date: Aug 2015 Location: Gilbert,AZ Posts: 90	Re: Rustoleum Paint job? Anyone ever do it straight out of a spray can? __________________ 18 year old girl who loves old trucks •Previous Projects• 1971 c10 longbed 350/350 1977 Silverado longbed 350/350 1978 K10 shortbed 350/t400 lifted 6 inches on 33s "LONGBED LIVES MATTER"

12-11-2015, 09:58 AM	#12
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: Rustoleum Paint job? Tractor supply matte black . http:// http://

12-10-2015, 06:18 AM	#13
Felino Registered User Join Date: Dec 2015 Location: Hollister Ca Posts: 4	Re: Rustoleum Paint job? nice thread

12-11-2015, 11:41 AM	#14
73737373 Registered User Join Date: Sep 2005 Location: Oklahoma USA Posts: 1,000	Re: Rustoleum Paint job? I use Rustoleum semi-gloss black rattle can on frame parts, inner fender wells, brackets, radiator support etc. As w/most paint work, the key is in the prep; even average paint will do well on clean, dry rust/grease free surfaces.

12-11-2015, 12:10 PM	#15
eastxbbqman Registered User Join Date: May 2011 Location: winnsboro,tx Posts: 103	Re: Rustoleum Paint job? When your truck is 6 colors and your broke, it is the way to go. I had green, white, maroon, grey, primer red, and black on mine. It looks better, but the dream is still a quality paint job.

12-11-2015, 01:05 PM	#16
Ft.ValloniaStreaker Registered User Join Date: Jul 2013 Location: Southern Indiana Posts: 160	Re: Rustoleum Paint job? OK, now don't laugh to hard. When I lost my shop in the divorce i needed to keep my bed from rusting so...I used a rattle can in each hand and came up with this Attached Images

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.