WTB Cab, step fenders, Auto Crossmember and more. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

anx · 10-21-2007, 06:11 PM

Hi, I am new to this board. I recently bought a 1969 short stepside and am in need of a few things to make it right. I thought my cab was fixable when i got the truck but after tearing it apart i found the previous owner did some tricky work with bondo and thin aluminum to sell the truck.

Anyway I am in cleveland ohio and need a decent cab it does not have to be perfect, i can put new rockers, corners etc. The firewall is completly shot on mine... I also need an auto crossmember and drivers step fender or whole step bed or fleetside bed. nothing perfect just workable.

Thanks, Chris

billsbowtie · 10-21-2007, 06:19 PM

chris i have some beds and a cab but i am about 400 to 450 miles from you.welcome to the board this is a great place.

xshadow · 10-21-2007, 06:42 PM

check out ebay # 170159713990

teeitup · 10-21-2007, 07:10 PM

I got auto crossmembers for $30 plus shipping, I got some beds here too. Thanks Randy

anx · 10-21-2007, 07:35 PM

billsbowtie ,How much for your cab and what is the condition? I would do the drive if I can find something worth it. Altho I only have a 2000 s10 with a 6' bed to haul it with. I think maybe a cab would fit if it was laid in with the firewall down.

I am looking at that ebay cab too.. looks pretty good

Thanks, Chris

xshadow · 10-21-2007, 07:46 PM

We hauled a lwb bed on a small chevy luv pup. It looked a little crazy but it worked. didn't flip over the lwb just sit it on there. It worked!

Quote:

Originally Posted by anx

. Altho I only have a 2000 s10 with a 6' bed to haul it with. I think maybe a cab would fit if it was laid in with the firewall down
Thanks, Chris

xshadow · 10-21-2007, 07:47 PM

sorry,,.. that had nothing to do with your post..hauling on a s10 just reminded me of this...

Quote:

Originally Posted by xshadow

We hauled a lwb bed on a small chevy luv pup. It looked a little crazy but it worked. didn't flip over the lwb just sit it on there. It worked!

anx · 10-21-2007, 07:37 PM

teeitup, How much would it cost to ship that crossmember to 44129. Its quite a distance. I'll take it if the shipping isnt too crazy.

billsbowtie · 10-21-2007, 07:55 PM

chris here is one of my cabs that is not spoken for yet. its a 72 non a/c chevy cab. it is perty soild it has a rust spot about the size of a 50cent piece above windshield on drivers side. and some rust in the useal places but not to bad. i have not started parting it out yet i have 2 more in front of it before i can get to it. price depends on how complete you want/need it to be.

billsbowtie · 10-21-2007, 07:56 PM

billsbowtie · 10-21-2007, 08:05 PM

heres a swb wide bed i have driver shape $300.00.

billsbowtie · 10-21-2007, 08:05 PM

billsbowtie · 10-21-2007, 08:09 PM

this step side bed is $200.00.

billsbowtie · 10-21-2007, 08:09 PM

billsbowtie · 10-21-2007, 08:10 PM

the worst rust spot on it.

billsbowtie · 10-21-2007, 08:12 PM

short wide bed

billsbowtie · 10-21-2007, 08:12 PM

billsbowtie · 10-21-2007, 08:13 PM

billsbowtie · 10-21-2007, 08:15 PM

chris if you are interested in any of the parts i will get more pics.

anx · 10-21-2007, 08:21 PM

billsbowtie, That step bed might be perfect for me. I have to think that one over. As far as the cab I just need a bare cab.

Thanks, Chris

billsbowtie · 10-21-2007, 08:25 PM

for just the bear cab $300.00

teeitup · 10-21-2007, 08:42 PM

Chris, I'll get a quote Monday evening. Thanks Randy

10-21-2007, 06:11 PM	#1
anx Registered User Join Date: Sep 2007 Location: cleveland ohio Posts: 9	WTB Cab, step fenders, Auto Crossmember and more. Hi, I am new to this board. I recently bought a 1969 short stepside and am in need of a few things to make it right. I thought my cab was fixable when i got the truck but after tearing it apart i found the previous owner did some tricky work with bondo and thin aluminum to sell the truck. Anyway I am in cleveland ohio and need a decent cab it does not have to be perfect, i can put new rockers, corners etc. The firewall is completly shot on mine... I also need an auto crossmember and drivers step fender or whole step bed or fleetside bed. nothing perfect just workable. Thanks, Chris

10-21-2007, 06:19 PM	#2
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB Cab, step fenders, Auto Crossmember and more. chris i have some beds and a cab but i am about 400 to 450 miles from you.welcome to the board this is a great place. __________________ i have 67/72 chevy truck parts f/s.

10-21-2007, 06:42 PM	#3
xshadow Registered User Join Date: Apr 2006 Location: va Posts: 553	Re: WTB Cab, step fenders, Auto Crossmember and more. check out ebay # 170159713990

10-21-2007, 07:10 PM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: WTB Cab, step fenders, Auto Crossmember and more. I got auto crossmembers for $30 plus shipping, I got some beds here too. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-21-2007, 07:35 PM	#5
anx Registered User Join Date: Sep 2007 Location: cleveland ohio Posts: 9	Re: WTB Cab, step fenders, Auto Crossmember and more. billsbowtie ,How much for your cab and what is the condition? I would do the drive if I can find something worth it. Altho I only have a 2000 s10 with a 6' bed to haul it with. I think maybe a cab would fit if it was laid in with the firewall down. I am looking at that ebay cab too.. looks pretty good Thanks, Chris

10-21-2007, 07:37 PM	#8
anx Registered User Join Date: Sep 2007 Location: cleveland ohio Posts: 9	Re: WTB Cab, step fenders, Auto Crossmember and more. teeitup, How much would it cost to ship that crossmember to 44129. Its quite a distance. I'll take it if the shipping isnt too crazy.

10-21-2007, 07:55 PM	#9
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB Cab, step fenders, Auto Crossmember and more. chris here is one of my cabs that is not spoken for yet. its a 72 non a/c chevy cab. it is perty soild it has a rust spot about the size of a 50cent piece above windshield on drivers side. and some rust in the useal places but not to bad. i have not started parting it out yet i have 2 more in front of it before i can get to it. price depends on how complete you want/need it to be. __________________ i have 67/72 chevy truck parts f/s.

10-21-2007, 07:56 PM	#10
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB Cab, step fenders, Auto Crossmember and more. __________________ i have 67/72 chevy truck parts f/s.

10-21-2007, 08:05 PM	#11
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB Cab, step fenders, Auto Crossmember and more. heres a swb wide bed i have driver shape $300.00. __________________ i have 67/72 chevy truck parts f/s.

10-21-2007, 08:09 PM	#13
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB Cab, step fenders, Auto Crossmember and more. this step side bed is $200.00. __________________ i have 67/72 chevy truck parts f/s.

10-21-2007, 08:10 PM	#15
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB Cab, step fenders, Auto Crossmember and more. the worst rust spot on it. __________________ i have 67/72 chevy truck parts f/s.

10-21-2007, 08:12 PM	#16
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB Cab, step fenders, Auto Crossmember and more. short wide bed __________________ i have 67/72 chevy truck parts f/s.

10-21-2007, 08:13 PM	#18
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB Cab, step fenders, Auto Crossmember and more. __________________ i have 67/72 chevy truck parts f/s.

10-21-2007, 08:15 PM	#19
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB Cab, step fenders, Auto Crossmember and more. chris if you are interested in any of the parts i will get more pics. __________________ i have 67/72 chevy truck parts f/s.

10-21-2007, 08:21 PM	#20
anx Registered User Join Date: Sep 2007 Location: cleveland ohio Posts: 9	Re: WTB Cab, step fenders, Auto Crossmember and more. billsbowtie, That step bed might be perfect for me. I have to think that one over. As far as the cab I just need a bare cab. Thanks, Chris



Register or Log In To remove these advertisements.

10-21-2007, 08:25 PM	#21
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB Cab, step fenders, Auto Crossmember and more. for just the bear cab $300.00 __________________ i have 67/72 chevy truck parts f/s.

10-21-2007, 08:42 PM	#22
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: WTB Cab, step fenders, Auto Crossmember and more. Chris, I'll get a quote Monday evening. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.