It's Sunday dinner time, what did you accomplish this weekend? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tx Firefighter · 04-02-2006, 08:36 PM

I worked 48 hours straight. That got me big money to buy new wheels and tires.

Next week, it's on though.

I have lots of clean, detailed parts laying on my workbenches ready to be installed.

gregsplace · 04-02-2006, 09:08 PM

I made a road trip up to Teeitup's for some parts!! Randy's a top-notch guy, glad after all these years I finally got the chance to meet him in person! Greg

jay_shy · 04-02-2006, 09:18 PM

I got my rally wheels blasted and primed and ready for some paint.

Of course, after I cleaned up the yard.

70c10 · 04-02-2006, 09:21 PM

Almost finished a cluster with a Camaro tach and clock. It's looking really sweet!

kaycee · 04-02-2006, 09:25 PM

Decided to take an advantage to Checkers deal on Eddy carbs and put it on Sat.Really made an improvement over the wore out Quad.

5150 · 04-02-2006, 09:23 PM

Got my 700r4 bolted up and holes drilled for the crossmember. Just have to wire up the overdrive and take care of the TV Cable.

Changed the Oil Pan Gasket while I was under there also.

Also finally DRILLED out my ignition key since the damn thing wouldn't come out. In the processs ruined the ignition switch behind the dash and the ignition bezel in front.

Got some turndowns for my exhaust put on. Apparently, Luv pointed out at the White House Cookout that where my exhast ends is a problem. Right above and on the rear end. So on my first long voyage to Maggie Valley it would boil my rear end fluid.

**truckdude239** · 04-02-2006, 09:27 PM

i got got my new hurst shifter which i scored for like 60 buxs new from a guy here and got it installed man what a difference

**Ron 586** · 04-02-2006, 09:51 PM

Made a little road trip from Big Sandy Tn. to Birmingham Al to pick up a 67short frame and a few odd and ends parts from board member SK 1970. Real stand up guy and pleasure to do business with. It took 2 1/2 hours to get loaded up and head back home. I will post pictures and a full report on the new project soon.

*rage'nrat638* · 04-02-2006, 10:14 PM

friday it was WINDY my son opened the passenger door on my 69..fresh paint and jamed the door into the fender.
creased the door bent the hinges

so i got my truck damaged

71chevytruckguy · 04-02-2006, 10:27 PM

after 6 months of stittin in my driveway since i wrecked my '69, I FINALLY GOT HER RUNNING. and she runs pretty dang good.

chris.

ClemsonChevy · 04-03-2006, 01:10 AM

Quote:

Originally Posted by rage'nrat638

friday it was WINDY my son opened the passenger door on my 69..fresh paint and jamed the door into the fender.
creased the door bent the hinges

so i got my truck damaged

Dang, that sucks....

I helped my brother-in-law build a doghouse for his new dog. Sent my old KZ440 motorcycle carb diaphragms to England to have NRP rebuild them for half of what kawasaki wants for old "new" ones.

69ride · 04-02-2006, 09:37 PM

Installed my WIX spin-on oil filter conversion kit.

boogie67 · 04-02-2006, 10:22 PM

Brought the 71 chevy that I bought home today.Its a complete truck hope to use it for parts Its been sitting since 85.

Mechdawg · 04-02-2006, 10:23 PM

Plumbed and wired the 327 hopefully get to hear it fire tommarrow. Fingers are crossed. Also got to put in an order to jegs for my hooker exhaust kit. And got a pair of flowmaster 40's from ebay been busy here.

XXL · 04-02-2006, 10:29 PM

Did some snip snip on the rearend... here.

GMCMAX · 04-02-2006, 11:12 PM

Installed power brake booster on four drum system, what a difference from manual, also guided the neighbor kid that was tearing down a tooyta V6 engine he overheated... towed it with the GMC- he wishes he would have bought a GM product now.

FRENCHBLUE72 · 04-03-2006, 12:01 AM

Got truck running good finally finished fuel system and got the bed sides swapped out and started the long overdue body work ....

powell72 · 04-03-2006, 12:03 AM

Went to the junkyard Saturday and got two van rallys with caps and rings for $30. Spent an hour Sunday stripping the paint from them and then had to go bring my father-in-law's basket case '72 Firebird to my house to store indefinitely.

bluec10 · 04-03-2006, 12:08 AM

My wife's sick of hearing me rant, so I'll share it with my virtual brethren. I'm in a truck stalemate because of money. I'd love to have spent a couple of hours doing something, anything, but I just can't right now. I looked at the truck when I put my kid's bikes away, that's it.

Oh yeah...the closest I came to my toolbox was buying a nifty wire stripper that I found on sale.

longhorn71 · 04-03-2006, 12:13 AM

swaped the doors out on my 2wd blazer today

72 CustomCamper · 04-03-2006, 12:34 AM

I took my truck to our first cruise night of the year. On the way to drop a buddy off at his house I had to show him the power of the big block. After dropping him off I headed for home and on the way I burned up the trans...

Chuck

Mudder · 04-03-2006, 12:06 AM

Worked Saturday night. Got up this am and raked the gumballs out of the yard so it can be mowed. Neighbor is gonna take care of that stuff for me until this overtime ends. Truck is nowhere ready going to a show the first weekend of May. It's not a very good subject at this time.

rauto13 · 04-03-2006, 12:06 AM

Just bought more stuff, I am running out of storage

http://67-72chevytrucks.com/vboard/s...d.php?t=194885

72armyswbtruck · 04-03-2006, 12:54 AM

Still stripping, sanding and preping the front suspension for POR-15 silver, pics and post to follow maybe next week

krue · 04-03-2006, 01:45 AM

Worked, hopefully I'll get to do some this week.

04-02-2006, 08:36 PM	#1
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	It's Sunday dinner time, what did you accomplish this weekend? I worked 48 hours straight. That got me big money to buy new wheels and tires. Next week, it's on though. I have lots of clean, detailed parts laying on my workbenches ready to be installed. __________________ I'm on the Instagram- @Gearhead_Kevin

04-02-2006, 09:08 PM	#2
gregsplace Senior Member Join Date: Dec 2000 Location: Colwich,Kansas Posts: 713	Re: It's Sunday dinner time, what did you accomplish this weekend? I made a road trip up to Teeitup's for some parts!! Randy's a top-notch guy, glad after all these years I finally got the chance to meet him in person! Greg __________________ 67 3/4 4x4 402,a/t,flat bed 98 GMC Sierra swb daily driver 87 burb parting out. 68 1/2 chevy, 350/350, 71 gmc frame, kid's beater 69 1ton 396-4sp, dump 69 swb stepside 396/400th current frameup 67 swb 454/400th rebuilding now, oldest boy just rolled it 99,HD, Road King Classic Colwich Ks

04-02-2006, 09:18 PM	#3
jay_shy SWB 4X4 CLUB Join Date: Feb 2005 Location: PA Posts: 1,088	Re: It's Sunday dinner time, what did you accomplish this weekend? I got my rally wheels blasted and primed and ready for some paint. Of course, after I cleaned up the yard.

04-02-2006, 09:21 PM	#4
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Re: It's Sunday dinner time, what did you accomplish this weekend? Almost finished a cluster with a Camaro tach and clock. It's looking really sweet! __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

04-02-2006, 09:25 PM	#5
kaycee Registered User Join Date: Jan 2000 Location: Wyoming USA Posts: 2,446	Re: It's Sunday dinner time, what did you accomplish this weekend? Decided to take an advantage to Checkers deal on Eddy carbs and put it on Sat.Really made an improvement over the wore out Quad. __________________ 2001 Silverado K-1500 2005 FXDWG stage3 69 CHEVY Short/Step 327/4L60 373 posi 63 IMPALA 327

04-02-2006, 09:23 PM	#6
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: It's Sunday dinner time, what did you accomplish this weekend? Got my 700r4 bolted up and holes drilled for the crossmember. Just have to wire up the overdrive and take care of the TV Cable. Changed the Oil Pan Gasket while I was under there also. Also finally DRILLED out my ignition key since the damn thing wouldn't come out. In the processs ruined the ignition switch behind the dash and the ignition bezel in front. Got some turndowns for my exhaust put on. Apparently, Luv pointed out at the White House Cookout that where my exhast ends is a problem. Right above and on the rear end. So on my first long voyage to Maggie Valley it would boil my rear end fluid. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

04-02-2006, 09:27 PM	#7
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,237	Re: It's Sunday dinner time, what did you accomplish this weekend? i got got my new hurst shifter which i scored for like 60 buxs new from a guy here and got it installed man what a difference __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

04-02-2006, 09:51 PM	#8
Ron 586 RIP Mr Ron Join Date: Dec 2005 Location: Big Sandy, Tn. 38221 Posts: 8,166	Re: It's Sunday dinner time, what did you accomplish this weekend? Made a little road trip from Big Sandy Tn. to Birmingham Al to pick up a 67short frame and a few odd and ends parts from board member SK 1970. Real stand up guy and pleasure to do business with. It took 2 1/2 hours to get loaded up and head back home. I will post pictures and a full report on the new project soon. __________________ Ron (Mr Round Tuit) Be kinder than necessary, for everyone you meet is fighting some kind of battle TN Message Forum TN Facebook Group SETN Truck Show My Photobucket

04-02-2006, 10:14 PM	#9
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	Re: It's Sunday dinner time, what did you accomplish this weekend? friday it was WINDY my son opened the passenger door on my 69..fresh paint and jamed the door into the fender. creased the door bent the hinges so i got my truck damaged

04-02-2006, 10:27 PM	#10
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	Re: It's Sunday dinner time, what did you accomplish this weekend? after 6 months of stittin in my driveway since i wrecked my '69, I FINALLY GOT HER RUNNING. and she runs pretty dang good. chris. __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's Last edited by 71chevytruckguy; 04-02-2006 at 10:28 PM.

04-02-2006, 09:37 PM	#12
69ride All Go, No Show Join Date: Jul 2003 Location: Creighton SK Posts: 286	Re: It's Sunday dinner time, what did you accomplish this weekend? Installed my WIX spin-on oil filter conversion kit. __________________ 69 LWB Rebuilt 283, aluminum intake, edelbrock carb, Mild Melling Cam, HEI.

04-02-2006, 10:22 PM	#13
boogie67 Registered User Join Date: Mar 2005 Location: waco tx Posts: 584	Re: It's Sunday dinner time, what did you accomplish this weekend? Brought the 71 chevy that I bought home today.Its a complete truck hope to use it for parts Its been sitting since 85. __________________ 77 swb starting all over again.

04-02-2006, 10:23 PM	#14
Mechdawg Registered User Join Date: Jul 2002 Location: Dover AFB Delaware Posts: 159	Re: It's Sunday dinner time, what did you accomplish this weekend? Plumbed and wired the 327 hopefully get to hear it fire tommarrow. Fingers are crossed. Also got to put in an order to jegs for my hooker exhaust kit. And got a pair of flowmaster 40's from ebay been busy here.

04-02-2006, 10:29 PM	#15
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	Re: It's Sunday dinner time, what did you accomplish this weekend? Did some snip snip on the rearend... here. __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter

04-02-2006, 11:12 PM	#16
GMCMAX Active Member Join Date: Jan 2006 Location: Lower Mid-East Ca. Posts: 326	Re: It's Sunday dinner time, what did you accomplish this weekend? Installed power brake booster on four drum system, what a difference from manual, also guided the neighbor kid that was tearing down a tooyta V6 engine he overheated... towed it with the GMC- he wishes he would have bought a GM product now. __________________ Never try to teach a pig to sing; it wastes your time and annoys the pig! Gets More Chicks My lugnuts require more torque than your honda makes! 68 GMC, 4X4 conversion w/73 k20 running gear and springs, 350 4spd, 4.10's, D44 powerlok front, 14BFF govlock rear, 33" tires, lifted 4".



Register or Log In To remove these advertisements.

04-03-2006, 12:01 AM	#17
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: It's Sunday dinner time, what did you accomplish this weekend? Got truck running good finally finished fuel system and got the bed sides swapped out and started the long overdue body work .... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

04-03-2006, 12:03 AM	#18
powell72 Senior Member Join Date: Jan 2005 Location: Loveland Co. Posts: 3,098	Re: It's Sunday dinner time, what did you accomplish this weekend? Went to the junkyard Saturday and got two van rallys with caps and rings for $30. Spent an hour Sunday stripping the paint from them and then had to go bring my father-in-law's basket case '72 Firebird to my house to store indefinitely. __________________ Chris 74 Custom Deluxe SWB 350/350/3.73’s 99 2wd Silverado RCSB 5.3/4L60/3.90’s http://www.classictrucks.com/feature...short_bed.html

04-03-2006, 12:08 AM	#19
bluec10 Registered User Join Date: Apr 2002 Location: Manitoba, Canada Posts: 663	Re: It's Sunday dinner time, what did you accomplish this weekend? My wife's sick of hearing me rant, so I'll share it with my virtual brethren. I'm in a truck stalemate because of money. I'd love to have spent a couple of hours doing something, anything, but I just can't right now. I looked at the truck when I put my kid's bikes away, that's it. Oh yeah...the closest I came to my toolbox was buying a nifty wire stripper that I found on sale. __________________ Present: 2015 Tacoma. Yeah, not a GM, but I love it. 1969 GMC 32,000 - fix, drive, relax, fix... 2019 BMW R1250 GSA - Yahoooooooo 1979 Honda GL 1000 - retro touring at its best. Past: '05 Sierra 4x4 - Had 270,000 KM and running well when it was written-off by a stop sign runner. '94 F-150 from the "F word" company. I'll admit it...good truck. Sold what was left of it for $800 to a guy who came to pick it up at 11:00 PM with cash in hand. Hmm. '79 Sierra Grande (Black) organ donor - perfect rebuildable 4-bolt 350 and a good TH350. '76 Sierra Grande (Orange) - hate isn't too strong a word. Kid who bought it turned it into a hot rod. '68 C-10 R.I.P. - Dad's old truck...too far gone to resurrect. '59 C-50 - with hoist. Truck is gone, wife isn't. Nuff said.

04-03-2006, 12:13 AM	#20
longhorn71 Senior Member Join Date: Sep 2004 Location: CANADA Posts: 1,681	Re: It's Sunday dinner time, what did you accomplish this weekend? swaped the doors out on my 2wd blazer today

04-03-2006, 12:34 AM	#21
72 CustomCamper huh ??? Join Date: Nov 2002 Location: Fredericksburg,Va. Posts: 3,369	Re: It's Sunday dinner time, what did you accomplish this weekend? I took my truck to our first cruise night of the year. On the way to drop a buddy off at his house I had to show him the power of the big block. After dropping him off I headed for home and on the way I burned up the trans... Chuck __________________ 90 Blazer Silverado 350w/ 700R4 and 32" Kelly's "I am a bomb technician. If you see me running try to keep up!"

04-03-2006, 12:06 AM	#22
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	Re: It's Sunday dinner time, what did you accomplish this weekend? Worked Saturday night. Got up this am and raked the gumballs out of the yard so it can be mowed. Neighbor is gonna take care of that stuff for me until this overtime ends. Truck is nowhere ready going to a show the first weekend of May. It's not a very good subject at this time.

04-03-2006, 12:06 AM	#23
rauto13 saving one more Join Date: Sep 2005 Location: Pryor Creek, Oklahoma Posts: 3,066	Re: It's Sunday dinner time, what did you accomplish this weekend? Just bought more stuff, I am running out of storage http://67-72chevytrucks.com/vboard/s...d.php?t=194885 __________________ 72 Chevy longbed - now for parts 69 Chevy short fleet - needing some love 70 RS Camaro - needing more love driver - 96 GMC X-cab

04-03-2006, 12:54 AM	#24
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,034	Re: It's Sunday dinner time, what did you accomplish this weekend? Still stripping, sanding and preping the front suspension for POR-15 silver, pics and post to follow maybe next week __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

04-03-2006, 01:45 AM	#25
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: It's Sunday dinner time, what did you accomplish this weekend? Worked, hopefully I'll get to do some this week. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

Register or Log In To remove these advertisements.