CA 55-59 Misc Truck parts

[ptc]

CAB IS SOLD

55-66 rear stepside fenders L & R, GOOD FOR PATCH PANELS ONLY or making inner tubs for big tires. - LOCAL FREE ONLY GONE

55-56 Hood - decent usable condition - $100
58-59 Hood - Decent condition, small rust on upper corners. - $75

COMPLETE 1957 ROLLER 3600 Chassis, rearend, suspension, non cut up frame. $500 or offer.

Most of these parts came off the 57 Chevy 3600 - this is what I have left: UPDATED 3-23-16

Complete brake master cyl - $40
2 piece drive shaft w/ center support - came from a 235 with manual 4spd - $50
Interior window cranks - $10 Pair - SOLD
Interior door handles - $10 pair - SOLD
Exterior door handles - $10 pair -SOLD
Kick Panels and Vents -$40 all
Battery tray - $10
3600 1 piece Fender Emblems - $40 pair
57 Hood emblem - $30 - SOLD
Door glass - used $40 all SOLD
Wing Window Assemblies with Glass - $80 pair SOLD
Rear Small Glass - $40 SOLD
Heater core /fan assembly - $50
55-59 V Gauge Assembly complete - $75


Send me an email via PM for more pics on any of the items.

[ptc]

Some more pics

COMPLETE rolling chassis 3/4 ton suspension long bed 6 cyl 4 speed setup. $500 Takes it all!!!!!

[j_cst_10]

I need a few misc parts and would prefer them to have some age since the rest of the pick up does (hence not buying them new). My pick up is a '59 Chevy 3100

I need:
inside window crank
inside door crank
driver side window frame sheet metal and hardware
horn button
original style rear tail lights
driver side window glass (shipping may not make this feasible).

Thanks,

Jeff

[ptc]

Originally Posted by j_cst_10

I need a few misc parts and would prefer them to have some age since the rest of the pick up does (hence not buying them new). My pick up is a '59 Chevy 3100

I need:
inside window crank
inside door crank
driver side window frame sheet metal and hardware
horn button
original style rear tail lights
driver side window glass (shipping may not make this feasible).

Thanks,

Jeff

Got the BOLD parts - you want both sides?

Not sure what the sheet metal frame is????
Yes - Glass would be too costly to pack and ship reasonably.

[JohnMW68]

Originally Posted by ptc

Im gonna start cutting up this CAB I guess - cant sell it whole.... nobody wants a good non rusted out CAB guess they all would rather buy every chinese patch made and redo all the old EAST COAST rust buckets.

does anybody need a good roof, cowl assembly, pillars, rear small window panel, firewall, floor, steps, dash,

Its a deluxe cab too

Cash talks

Do you have the upper windshield channel for a 55 2nd series? I'm not sure if I'm calling it it correct thing, its the piece that the windshield sits in, where the roof and headliner meet, it goes from A-pillar to A-pillar as well.

[ptc]

Originally Posted by JohnMW68

Do you have the upper windshield channel for a 55 2nd series? I'm not sure if I'm calling it it correct thing, its the piece that the windshield sits in, where the roof and headliner meet, it goes from A-pillar to A-pillar as well.

YEs its connected to the cab.... What do you want to pay for it?

[JohnMW68]

Originally Posted by ptc

YEs its connected to the cab.... What do you want to pay for it?

If it doesn't have a any holes rusted through it, and is otherwise complete, I could do $100 for that piece, what do you think? Do you have any photos?

[j_cst_10]

I don't need both sides for the window and door crank but if you want to sell in a set I'll buy both. Below is a picture of my door frame missing the window channel piece.


Posted via Mobile Device

[Valarius_Starchaser]

got any pics of that 57 hood emblem?

shipped to 57106

[ptc]

Baja Bob - pics of clutch parts

Outside arm, pedal, shaft, inside mount, lever, connector rod (not shown) all included for $50 shipped.

Sorry for the lousy pics

[bajabob]

PTC
Sounds good, I am in. Advise on Paypal ??

[ptc]

Originally Posted by bajabob

PTC
Sounds good, I am in. Advise on Paypal ??

pm sent

[LDO]

Originally Posted by ptc

Baja Bob - pics of clutch parts

Outside arm, pedal, shaft, inside mount, lever, connector rod (not shown) all included for $50 shipped.

Sorry for the lousy pics

Still have this?

[Valarius_Starchaser]

Sorry I feel of the planet a bit had found a set locally long story short he sold out from under me so as long as the mounting studs are on it and in good condition and its not covered in pits I think I will take it

pm me for paypal or however you want to do that jazz

[Valarius_Starchaser]

No sorry for the confusion just the hood emblem it would be the same size for the 3100 correct or have I been misinformed?

[Valarius_Starchaser]

any word? Haven't heard from you in a while here hope everything is okay

[bajabob]

Parts came today, thanks and nice doin business.

[ptc]

Originally Posted by bajabob

Parts came today, thanks and nice doin business.

Thanks Bob sorry for all the delays, hope that fits all your needs! enjoy

[ptc]

Originally Posted by Valarius_Starchaser

any word? Haven't heard from you in a while here hope everything is okay

Here ya go.... sorry been chasing my tail for too many projects going on and then they throw turkey on top of it all....

Good condition, will shine up with some serious polishing but not to SHOW style. perfect for patina look type truck. All the mounts are good, none broken.

[Valarius_Starchaser]

I sent a pm on the hood emblem

Are those lower marker light assemblies (clear ones) going up for sale as well as the headlight buckets? Interior door handles and window cranks?

I wouldn't need the headlight bezels if you need to sell the assemblies though I could also do that

[ptc]

Originally Posted by Valarius_Starchaser

I sent a pm on the hood emblem

Are those lower marker light assemblies (clear ones) going up for sale as well as the headlight buckets? Interior door handles and window cranks?

I wouldn't need the headlight bezels if you need to sell the assemblies though I could also do that

Ill have to check on the marker lights, they may be gone. The buckets and headlights are gone, still have bezels! ... lol and the interior handles and cranks. will send you a pm on everything.

[ptc]

Ok I have a few more items that have been removed from the truck.

Wing Window Assemblies - perfect for patina trucks, $80 for the pair. SOLD
Door latches and cranks. latches all good, 1 bad crank shaft - $60 for the set
Front bumper mounts - $10 pair
Window Regulator - $70 pair

[Tod59]

sent you a PM.

Tod

[ptc]

Originally Posted by Tod59

sent you a PM.

Tod

Send it again Tod, I didnt see what you needed.

[Rude Dude]

I will take bumper brackets if you still got them
Rudy

Originally Posted by ptc

Ok I have a few more items that have been removed from the truck.

Wing Window Assemblies - perfect for patina trucks, $80 for the pair. SOLD
Door latches and cranks. latches all good, 1 bad crank shaft - $60 for the set
Front bumper mounts - $10 pair
Window Regulator - $70 pair