Got a set of Rally's to put on my '67... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

EARNHARDT#3 · 02-16-2016, 07:34 PM

15x8's. They were blasted and painted a long time ago and never used. I'm going to run them as is along with the 88-98+ center caps and a set of 3" trim rings. Tires will be 255/60's.

firedemon · 02-16-2016, 08:57 PM

put them on my 67 too . I think they look great on our trucks

EARNHARDT#3 · 02-17-2016, 09:03 AM

Quote:

Originally Posted by firedemon

put them on my 67 too . I think they look great on our trucks

Yeah I like the original skinny wheels too because you don't see many of them. But I think these will give me the look I'm after. I'm not a fan of anything bigger than these on our trucks. Maybe 15x10 in the rear but I don't like the larger diameter wheels.

FlameOut · 02-17-2016, 09:28 AM

I'm using them also, on my 72 K10, as soon as I find a place to media blast them for me. Going with 33 / 12.50R15's though

joeydurango · 02-17-2016, 11:33 AM

If any of you guys have an extra set of 15x8 6-lug, 4-nub steelies sitting around after you do this swap, let me know...

I'm trying to go in the opposite direction. My rallies are freshly redone, and I like the look, but I like the old school look even better.

FlameOut · 02-17-2016, 12:17 PM

Quote:

Originally Posted by joeydurango

If any of you guys have an extra set of 15x8 6-lug, 4-nub steelies sitting around after you do this swap, let me know...

I'm trying to go in the opposite direction. My rallies are freshly redone, and I like the look, but I like the old school look even better.

There was a guy selling a set of 4 in the For Sale forums, but I believe he wanted $500 + shipping. I'd like to find a set myself, but will never pay that

EARNHARDT#3 · 02-17-2016, 11:38 AM

My stock wheels are like 5x6 or smaller I believe. And they'll be sticking around seeing how value on this stuff keeps going up and up.

joeydurango · 02-17-2016, 01:29 PM

Yeah, I'm not paying gold prices either...

EARNHARDT#3 · 02-20-2016, 05:20 PM

I'm going to run the '88- (not sure what year) center caps. There are studs on the back of these caps that have little plugs in the end of them. You take a pair of pliers and pop that cap off and it leaves a hole. You then use those studs to mount the center caps. 3 screws from the back of the wheel into the center cap is sufficient.

EARNHARDT#3 · 02-20-2016, 05:24 PM

This is the plug you pop out. There are 6 studs but you only need to pop 3 out of each cap. Take out every other one. My Rally wheels have 6 holes that match up with the 6 studs but 3 of them are too small for the proper size screw.

EARNHARDT#3 · 02-20-2016, 05:28 PM

I got a great deal on these like new Goodyear Eagle tires. 255/60-15. I was going to buy BFG Radial T/A's but these saved me $500 and they still have the look I wanted.

57larry · 02-20-2016, 08:34 PM

good looking wheels. I had this type on my truck until I found Corvette style rally wheels on craigslist. like both styles

EARNHARDT#3 · 02-21-2016, 05:40 AM

Quote:

Originally Posted by 57larry

good looking wheels. I had this type on my truck until I found Corvette style rally wheels on craigslist. like both styles

I like them because they look like they belong on these trucks, like they're factory.

USSkoval · 02-21-2016, 04:16 PM

Quote:

Originally Posted by EARNHARDT#3

I got a great deal on these like new Goodyear Eagle tires. 255/60-15. I was going to buy BFG Radial T/A's but these saved me $500 and they still have the look I wanted.

Are those reproductions? Goodyear has not produced those for quite some time now.

EARNHARDT#3 · 02-21-2016, 04:49 PM

Quote:

Originally Posted by USSkoval

Are those reproductions? Goodyear has not produced those for quite some time now.

I believe they're just old. But they're not dry rotted and are like new yet so I don't know. They were off a '79 Corvette.

USSkoval · 02-21-2016, 07:31 PM

Quote:

Originally Posted by EARNHARDT#3

I believe they're just old. But they're not dry rotted and are like new yet so I don't know. They were off a '79 Corvette.

They stopped making them sometime in the mid 90's. They were a very good tire IMHO and those ones in that condition probably lead a very pampered life in a climate controlled storage... but they are probably rock hard now. Some people will give crap for running old tires, but they should be fine for pleasure driving in nice weather. If you are going to drive the truck a lot, you should probably sell them to someone looking for a period-correct tire for their show car/truck.

EARNHARDT#3 · 02-21-2016, 09:28 PM

Quote:

Originally Posted by USSkoval

They stopped making them sometime in the mid 90's. They were a very good tire IMHO and those ones in that condition probably lead a very pampered life in a climate controlled storage... but they are probably rock hard now. Some people will give crap for running old tires, but they should be fine for pleasure driving in nice weather. If you are going to drive the truck a lot, you should probably sell them to someone looking for a period-correct tire for their show car/truck.

They seem very pliable yet. Maybe they'll wear out fast, I don't know. I do like the way they look though.

**Ironangel** · 02-21-2016, 07:50 AM

Mighty hard to beat the old school look of the Rally's...

EARNHARDT#3 · 02-21-2016, 11:50 AM

Quote:

Originally Posted by Ironangel

Mighty hard to beat the old school look of the Rally's...

That's what I figured!

1970 charlie · 02-21-2016, 06:55 PM

I like the photo shots (rallys and a real mans garage). Heres mine in this photo I still needed to make the hubcap clips.

67 chevelle · 02-26-2016, 08:05 PM

Quote:

Originally Posted by 1970 charlie

I like the photo shots (rallys and a real mans garage). Heres mine in this photo I still needed to make the hubcap clips.

What caps are those ?

EARNHARDT#3 · 02-23-2016, 08:43 PM

Mounted 2 of the tires up and put the center caps on. Trim rings are due in on Friday. These things are like steam rollers compared to the 215/75's that are currently on my C10.

FlameOut · 02-23-2016, 08:58 PM

They do look good! I'm using the same wheels on my 72 K10 and just today I also mounted all 4 tires (33 / 12.50R15's)

midniteblues · 02-23-2016, 11:33 PM

rallies look great on these trucks i put them on the kids 67 when i did the 5 lug swap.

your squares look bigger than ours though i allways thought rally wheels were all the same 5 lug/6lug.

i tried finding a closer pic of them but this was it.

EARNHARDT#3 · 02-24-2016, 04:34 AM

Quote:

Originally Posted by midniteblues

rallies look great on these trucks i put them on the kids 67 when i did the 5 lug swap.

your squares look bigger than ours though i allways thought rally wheels were all the same 5 lug/6lug.

i tried finding a closer pic of them but this was it.

6 lug has bigger but less squares than 5 lug.

02-16-2016, 07:34 PM	#1
EARNHARDT#3 Registered User Join Date: May 2014 Location: PA Posts: 1,417	Got a set of Rally's to put on my '67... 15x8's. They were blasted and painted a long time ago and never used. I'm going to run them as is along with the 88-98+ center caps and a set of 3" trim rings. Tires will be 255/60's. Attached Images __________________ 1967 C10, LWB, 250, Powerglide, PS, PB, 3/4 STATIC DROP

02-16-2016, 08:57 PM	#2
firedemon Registered User Join Date: Jun 2015 Location: @ Posts: 890	Re: Got a set of Rally's to put on my '67... put them on my 67 too . I think they look great on our trucks

02-17-2016, 09:28 AM	#4
FlameOut Registered User Join Date: May 2014 Location: Pittsburgh, PA Posts: 712	Re: Got a set of Rally's to put on my '67... I'm using them also, on my 72 K10, as soon as I find a place to media blast them for me. Going with 33 / 12.50R15's though __________________ Bill 2004 Chevy Silverado Z71 Ext Cab 1500 1972 Chevy K-10 SOLD 1967 Chevelle SS

02-17-2016, 11:33 AM	#5
joeydurango Registered User Join Date: Dec 2013 Location: Durango, CO Posts: 827	Re: Got a set of Rally's to put on my '67... If any of you guys have an extra set of 15x8 6-lug, 4-nub steelies sitting around after you do this swap, let me know... I'm trying to go in the opposite direction. My rallies are freshly redone, and I like the look, but I like the old school look even better. __________________ 1972 K10 Cheyenne Super \| LWB, fleetside \| 350/350/205 \| KEEPER 1971 K10 Cheyenne \| SWB, fleetside \| LS Swap 5.3/4L60 \| SOLD 1976 Trans Am \| 400/4-spd \| SOLD 1976 Trans Am \| 455/4-spd \| TOTALED

02-17-2016, 11:38 AM	#7
EARNHARDT#3 Registered User Join Date: May 2014 Location: PA Posts: 1,417	Re: Got a set of Rally's to put on my '67... My stock wheels are like 5x6 or smaller I believe. And they'll be sticking around seeing how value on this stuff keeps going up and up. __________________ 1967 C10, LWB, 250, Powerglide, PS, PB, 3/4 STATIC DROP

02-17-2016, 01:29 PM	#8
joeydurango Registered User Join Date: Dec 2013 Location: Durango, CO Posts: 827	Re: Got a set of Rally's to put on my '67... Yeah, I'm not paying gold prices either... __________________ 1972 K10 Cheyenne Super \| LWB, fleetside \| 350/350/205 \| KEEPER 1971 K10 Cheyenne \| SWB, fleetside \| LS Swap 5.3/4L60 \| SOLD 1976 Trans Am \| 400/4-spd \| SOLD 1976 Trans Am \| 455/4-spd \| TOTALED

02-20-2016, 05:20 PM	#9
EARNHARDT#3 Registered User Join Date: May 2014 Location: PA Posts: 1,417	Re: Got a set of Rally's to put on my '67... I'm going to run the '88- (not sure what year) center caps. There are studs on the back of these caps that have little plugs in the end of them. You take a pair of pliers and pop that cap off and it leaves a hole. You then use those studs to mount the center caps. 3 screws from the back of the wheel into the center cap is sufficient. Attached Images __________________ 1967 C10, LWB, 250, Powerglide, PS, PB, 3/4 STATIC DROP

02-20-2016, 05:24 PM	#10
EARNHARDT#3 Registered User Join Date: May 2014 Location: PA Posts: 1,417	Re: Got a set of Rally's to put on my '67... This is the plug you pop out. There are 6 studs but you only need to pop 3 out of each cap. Take out every other one. My Rally wheels have 6 holes that match up with the 6 studs but 3 of them are too small for the proper size screw. Attached Images __________________ 1967 C10, LWB, 250, Powerglide, PS, PB, 3/4 STATIC DROP Last edited by EARNHARDT#3; 02-20-2016 at 05:31 PM.

02-20-2016, 05:28 PM	#11
EARNHARDT#3 Registered User Join Date: May 2014 Location: PA Posts: 1,417	Re: Got a set of Rally's to put on my '67... I got a great deal on these like new Goodyear Eagle tires. 255/60-15. I was going to buy BFG Radial T/A's but these saved me $500 and they still have the look I wanted. Attached Images __________________ 1967 C10, LWB, 250, Powerglide, PS, PB, 3/4 STATIC DROP

02-20-2016, 08:34 PM	#12
57larry Registered User Join Date: Nov 2007 Location: Indianapolis Posts: 1,161	Re: Got a set of Rally's to put on my '67... good looking wheels. I had this type on my truck until I found Corvette style rally wheels on craigslist. like both styles

02-21-2016, 07:50 AM	#18
Ironangel Senior Member Join Date: Feb 2010 Location: Falls City, Nebraska "100 Miles From Nowhere" Posts: 2,219	Re: Got a set of Rally's to put on my '67... Mighty hard to beat the old school look of the Rally's... __________________ Michael of the clan Hill, "Two Seventy Two's" 71 1-ton Dually 350 4-Speed 71 C/50 Grain Truck, 350 Split-Axle 4-Speed 02 3/4 ton Express 14 Indian Chief Vintage 1952 Ford 8N, "Only Ford Allowed On The Property" "Be American, Buy American"

02-21-2016, 06:55 PM	#20
1970 charlie Registered User Join Date: Oct 2015 Location: grand valley pa Posts: 52	Re: Got a set of Rally's to put on my '67... I like the photo shots (rallys and a real mans garage). Heres mine in this photo I still needed to make the hubcap clips. Attached Images

02-23-2016, 08:43 PM	#22
EARNHARDT#3 Registered User Join Date: May 2014 Location: PA Posts: 1,417	Re: Got a set of Rally's to put on my '67... Mounted 2 of the tires up and put the center caps on. Trim rings are due in on Friday. These things are like steam rollers compared to the 215/75's that are currently on my C10. Attached Images __________________ 1967 C10, LWB, 250, Powerglide, PS, PB, 3/4 STATIC DROP

02-23-2016, 08:58 PM	#23
FlameOut Registered User Join Date: May 2014 Location: Pittsburgh, PA Posts: 712	Re: Got a set of Rally's to put on my '67... They do look good! I'm using the same wheels on my 72 K10 and just today I also mounted all 4 tires (33 / 12.50R15's) __________________ Bill 2004 Chevy Silverado Z71 Ext Cab 1500 1972 Chevy K-10 SOLD 1967 Chevelle SS

02-23-2016, 11:33 PM	#24
midniteblues Registered User Join Date: Jul 2011 Location: strausstown pa Posts: 3,394	Re: Got a set of Rally's to put on my '67... rallies look great on these trucks i put them on the kids 67 when i did the 5 lug swap. your squares look bigger than ours though i allways thought rally wheels were all the same 5 lug/6lug. i tried finding a closer pic of them but this was it. Attached Images __________________ 81 camaro 355 4/spd 342 posi my first love. 67 swb step 454/4spd ott 373 posi 4/7 drop. 2000 s10 zr2 little blue truck that never gets stuck. '74 heald super bronc vt8. tecumseh powered moon rover.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.