1983 Chevy C10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

alemanc · 03-14-2007, 10:59 PM

A co-worker had told me about this site and I thought I'd go ahead and post my truck. I'm in the process of getting the body work done to my truck and lowering it a little. Edited by Moderator

Rc 415 · 03-14-2007, 11:09 PM

Sweet

1LoC10 · 03-14-2007, 11:09 PM

very nice truck you got there, and welcome to the site... and don't forget to take a look at the rules of this board

Srubydo1986 · 03-14-2007, 11:41 PM

Very nice short bed. And welcome from Virginia

Pyrotechnic · 03-15-2007, 12:09 AM

Where in Texas are you located? Love the Suburban/Blazer grill. Looks sweet.

Also, how did you do the alternator and a/c compressor swap? That something I've been contemplating doing for awhile now.

bigtruck81 · 03-15-2007, 12:53 AM

early 83? or just one someone put an 81-82 bumper on.

never seen that with the newer front clip before. i have to say, i kinda like it.

alemanc · 03-15-2007, 09:07 AM

the bumper that came with it was in bad condition. found this one at a junk yard. will be getting a new one with no lights soon.

Pyrotechnic · 03-15-2007, 04:31 PM

The turn signals in the front bumper look pretty cool. If you convert them to clear fog lights, they would be functional as well.

bigtruck81 · 03-15-2007, 12:55 AM

Quote:

Originally Posted by Pyrotechnic

Also, how did you do the alternator and a/c compressor swap? That something I've been contemplating doing for awhile now.

my 88+ trucks have all been like that, so im gonna guess it had to do with the serpentine swap.

alemanc · 03-15-2007, 09:06 AM

i went with the serpentine setup. actually when i bought the truck it had already had that set up. all i did was rebuilt a 350 and used the same setup. actually works out a lot better. here's what i've put into the engine:

ARP CYLINDER HEAD STUDS

B&M TORQUE CONVERTER, TORK MASTER 2400 STALL

HAD AN EDELBROCK 750 PERFORMER CARB SWITCHED TO HOLLEY STREET AVENGER 770 (BEST CHANGE I'VE DONE SO FAR)

EDELBROCK PERFORMER RPM CYLINDER HEADS, ALUMINUM, 64CC CHAMBER, 170CC INTAKE RUNNER

EDELBROCK INTAKE MANIFOLD, PERFORMER RPM, DUAL PLANE, ALUMINIM, SQUARE BORE

CAM AND LIFTERS, HYDRAULIC FLAT TAPPET, ADVERTISED DURATION 308/318, LIFT .488/.510

EDELBROCK TIMING CHAIN AND GEAR SET, PERFORMER LINK, DOUBLE ROLLER, IRON/STEEL SPROCKETS

SUMMIT ROLLER ROCKER ARMS, FULL ROLLER, ALUMINUM 1.5 RATIO

84slopwaggin · 03-15-2007, 02:31 PM

Thats a heckuva engine combination you have. I bet it idles really mean. In the future you might want to do a video recording of the truck as it idles and maybe get a buddy to shoot a nice burnout and driveby. What do you have for mufflers? How does it drive with the tork master stall converter and do you recommend them for others?

*Zilverado* · 03-15-2007, 03:09 PM

Very nice - I like the blue. Body work? What body work?

krue · 03-15-2007, 11:19 PM

You'll need to subscribe and post a WTB thread on the parts board for any thing you need to buy.

68Stepbed · 03-16-2007, 11:30 AM

Welcome to the board from Tennessee. Sweet little truck you got there! Sounds like a nice ride.

85_SWB · 03-16-2007, 03:08 PM

Love the truck
i want your wheels and paint
how much do you plan on lowering it

C&C Chevy · 03-16-2007, 05:25 PM

from Oklahoma! Nice ride! Love the blue.

alemanc · 03-16-2007, 10:26 PM

Quote:

Originally Posted by 85_SWB

Love the truck
i want your wheels and paint
how much do you plan on lowering it

the wheels are only 15s. i personally feel anything over 16 makes the truck look like a skate. 17s are cutting it close though. although the 17s do look good but the truck really needs to be dropped low to compensate the look.

i'd like to drop the truck maybe 4" in the rear and 2" in the front. i want the even look.

gchemist · 03-17-2007, 01:07 AM

Another 83 with a 91 grill!! Welcome to the site. I have the same front end on my truck. I plan to add a 81-82 on my truck. The secret it that it will not have lights!! It will have air induction!!

bigblock73 · 03-17-2007, 10:42 AM

Great looking truck, love the color!

Welcome to the board from MN.

poolboy65-ls1 · 03-17-2007, 11:32 AM

Welcome!!!

86swb · 03-17-2007, 05:15 PM

Welcome to the board. Love the truck.

03-14-2007, 10:59 PM	#1
alemanc Registered User Join Date: Mar 2007 Location: Texas Posts: 12	1983 Chevy C10 A co-worker had told me about this site and I thought I'd go ahead and post my truck. I'm in the process of getting the body work done to my truck and lowering it a little. Edited by Moderator Attached Images Last edited by krue; 03-15-2007 at 11:20 PM.

03-14-2007, 11:09 PM	#2
Rc 415 Flat Black, & Chrome! Join Date: Jan 2007 Location: San Francisco Posts: 852	Re: 1983 Chevy C10 Sweet __________________ 1983 Chevy C10 Stepside Sold http://s69.photobucket.com/albums/i76/rc_415/

03-14-2007, 11:09 PM	#3
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: 1983 Chevy C10 very nice truck you got there, and welcome to the site... and don't forget to take a look at the rules of this board __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

03-14-2007, 11:41 PM	#4
Srubydo1986 The Crazy Machanic Join Date: Jan 2007 Location: Nokesville Va Posts: 1,437	Re: 1983 Chevy C10 Very nice short bed. And welcome from Virginia __________________ 1986 Sliverado longbed 400 small block mean as hell, 700r4 trans (5 speed coming one day) 1970 chevelle 2dr sedan Latest update June 24 2007. *1957 4 door stationwagon - pink all original needing a good restore (body great, floors bad) newest additions 1965 shortbed fleet great granddads. Been told im nuts to bring it back from the dead (still going to happen) plans-all stock with a turbo 292 inline 3 speed column shift. and thats it big block 427 and 5 speed trans and ford 9 inch theyhave no home yet thinking what to put them in and a 79 c60 trash truck um no idea i have one

03-15-2007, 12:09 AM	#5
Pyrotechnic Registered User Join Date: Feb 2007 Location: Austin, TX Posts: 3,930	Re: 1983 Chevy C10 Where in Texas are you located? Love the Suburban/Blazer grill. Looks sweet. Also, how did you do the alternator and a/c compressor swap? That something I've been contemplating doing for awhile now.

03-15-2007, 12:53 AM	#6
bigtruck81 Registered User Join Date: Feb 2004 Location: northern, in Posts: 350	Re: 1983 Chevy C10 early 83? or just one someone put an 81-82 bumper on. never seen that with the newer front clip before. i have to say, i kinda like it.

03-15-2007, 09:07 AM	#7
alemanc Registered User Join Date: Mar 2007 Location: Texas Posts: 12	Re: 1983 Chevy C10 the bumper that came with it was in bad condition. found this one at a junk yard. will be getting a new one with no lights soon.

03-15-2007, 04:31 PM	#8
Pyrotechnic Registered User Join Date: Feb 2007 Location: Austin, TX Posts: 3,930	Re: 1983 Chevy C10 The turn signals in the front bumper look pretty cool. If you convert them to clear fog lights, they would be functional as well.

03-15-2007, 09:06 AM	#10
alemanc Registered User Join Date: Mar 2007 Location: Texas Posts: 12	Re: 1983 Chevy C10 i went with the serpentine setup. actually when i bought the truck it had already had that set up. all i did was rebuilt a 350 and used the same setup. actually works out a lot better. here's what i've put into the engine: ARP CYLINDER HEAD STUDS B&M TORQUE CONVERTER, TORK MASTER 2400 STALL HAD AN EDELBROCK 750 PERFORMER CARB SWITCHED TO HOLLEY STREET AVENGER 770 (BEST CHANGE I'VE DONE SO FAR) EDELBROCK PERFORMER RPM CYLINDER HEADS, ALUMINUM, 64CC CHAMBER, 170CC INTAKE RUNNER EDELBROCK INTAKE MANIFOLD, PERFORMER RPM, DUAL PLANE, ALUMINIM, SQUARE BORE CAM AND LIFTERS, HYDRAULIC FLAT TAPPET, ADVERTISED DURATION 308/318, LIFT .488/.510 EDELBROCK TIMING CHAIN AND GEAR SET, PERFORMER LINK, DOUBLE ROLLER, IRON/STEEL SPROCKETS SUMMIT ROLLER ROCKER ARMS, FULL ROLLER, ALUMINUM 1.5 RATIO

03-15-2007, 02:31 PM	#11
84slopwaggin Registered User Join Date: Apr 2005 Location: Ar Posts: 558	Re: 1983 Chevy C10 Thats a heckuva engine combination you have. I bet it idles really mean. In the future you might want to do a video recording of the truck as it idles and maybe get a buddy to shoot a nice burnout and driveby. What do you have for mufflers? How does it drive with the tork master stall converter and do you recommend them for others?

03-15-2007, 03:09 PM	#12
Zilverado Account Suspended Join Date: Nov 2002 Location: Winnipeg, Manitoba, Canada Posts: 798	Re: 1983 Chevy C10 Very nice - I like the blue. Body work? What body work?

03-15-2007, 11:19 PM	#13
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: 1983 Chevy C10 You'll need to subscribe and post a WTB thread on the parts board for any thing you need to buy. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

03-16-2007, 11:30 AM	#14
68Stepbed Registered User Join Date: Mar 2005 Location: 10-Uh-See Posts: 5,609	Re: 1983 Chevy C10 Welcome to the board from Tennessee. Sweet little truck you got there! Sounds like a nice ride. __________________ Matt 68 C10 stepside, LS1/700R4, TCI Engineering suspension system Last edited by 68Stepbed; 03-16-2007 at 11:31 AM.

03-16-2007, 03:08 PM	#15
85_SWB Registered User Join Date: Oct 2006 Location: Wisconsin Posts: 174	Re: 1983 Chevy C10 Love the truck i want your wheels and paint how much do you plan on lowering it __________________ 1985 C10 SWB- Project

03-16-2007, 05:25 PM	#16
C&C Chevy Registered User Join Date: Feb 2003 Location: Midwest City, OK Posts: 1,001	Re: 1983 Chevy C10 from Oklahoma! Nice ride! Love the blue. __________________ Robert Current: 1986 SWB Silverado 4.3 / TH400 Past: 1985 SWB Silverado 305 / TH350 - sold 1995 1987 1/2 ton Silverado - FI 350 / 700R4 sold 2007



Register or Log In To remove these advertisements.

03-17-2007, 01:07 AM	#18
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Re: 1983 Chevy C10 Another 83 with a 91 grill!! Welcome to the site. I have the same front end on my truck. I plan to add a 81-82 on my truck. The secret it that it will not have lights!! It will have air induction!! __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

03-17-2007, 10:42 AM	#19
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	Re: 1983 Chevy C10 Great looking truck, love the color! Welcome to the board from MN. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

03-17-2007, 11:32 AM	#20
poolboy65-ls1 iamthepoolboy! Join Date: Jun 2004 Location: Benton Arkansas Posts: 175	Re: 1983 Chevy C10 Welcome!!! __________________ Black primed 81 Silverado SWB one owner rust free all original 106,000 project. Steel cowl hood, 89/91 front grill, Blazer tailgate trim, sport rear bumper, 5/6 Drop, 17" Eagle Alloys, Big block is on the stand! COMING SOON: one piece glass, and more.

03-17-2007, 05:15 PM	#21
86swb Born a Chevy Man Join Date: Apr 2005 Location: Navarre, Florida Posts: 10,221	Re: 1983 Chevy C10 Welcome to the board. Love the truck. __________________ John or 86 (Viet Nam combat Vet-BIG RED ONE) '65-'66 1986 Chevy SWB Silverado 1984 Chevy Longbed Silverado New Kia Sportage (Wife's car and she loves it) CHEVY, American made w/pride! If you can read this, YOU NEED TO THANK A TEACHER! If you can read this in ENGLISH, PLEASE THANK A SOLDIER! GOD BLESS AMERICA AND BLESS OUR FIGHTING TROOPS

Register or Log In To remove these advertisements.