MN Gates, roofs, doors, fenders. MN>TX - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**too much stuff** · 12-08-2017, 09:19 PM

Will be heading from MN to northern Texas in Feb and Figured I would offer up some bigger parts for sale that I can haul with me. You will need to be close to my route or willing to meet close to it. (or local pickup in northern MN) No shipping otherwise.

Pb57 has first choice on gates and dieselwrencher has second choice as they have both asked about one.
Everything else is up for grabs. Prices are reasonable and would be OK with a few bucks for gas depending on how far out of my way I go.

$125 - Blue gate with protector. Surface rust, no holes I see. Very slight bow.
$350 - pair of 1972 door shells. Drivers side has a few pin holes, but has been blasted so you see what is there. Very straight on the outside.
$125 -fully blasted gate with a few pin holes and slight bow.
$400 -blue gate. pretty decent and straight. Has a few screw holes from a tailgate band.
$80 - green gate with dents on top otherwise clean.
$150 - roof with cargo light. Nice shape.
$250 - maroon gate. Slight bow, pretty decent.
$120 - red fender, pretty decent.
$80/each - blue 68 fender, gold 69-72 fender. Both will need a little work.

**too much stuff** · 12-08-2017, 09:28 PM

Also have a cab in another thread and a set of 15x8" 6 lug wheels. Will probably add more to this thread...

**too much stuff** · 12-08-2017, 09:32 PM

More...

**too much stuff** · 12-08-2017, 09:34 PM

Last...

718jwh · 12-09-2017, 12:12 AM

Interested in the doors, what’s your route going to be ? I am 35 miles west of Chicago.

Thanks
John

**too much stuff** · 12-09-2017, 10:58 AM

Quote:

Originally Posted by 718jwh

Interested in the doors, what’s your route going to be ? I am 35 miles west of Chicago.

Thanks
John

Probably down I35 to des moines. Unsure after that, south and west from there.

70 C/K 20 · 12-21-2017, 11:24 PM

Is the grille for sale?

**too much stuff** · 12-22-2017, 11:13 PM

Quote:

Originally Posted by garciajulian

I'll take the blue one $400 if the others don't want them I live in nothern Texas and can meet you just let me know when your comming thru thanks.

Back of gate looks pretty good with a few dings here and there. Overall a pretty decent used gate. Will try to add a couple more pics for you.

Quote:

Originally Posted by 70 C/K 20

Is the grille for sale?

Sure, it is driver shape. $100. Will try to add pics soon

garciajulian · 12-22-2017, 11:29 PM

OK sure would like to see them

70 C/K 20 · 12-22-2017, 11:46 PM

Ok thanks. I live just south of Dallas. Could meet up when you get down here if it's in better shape than the one I've got.

In The Ten Ring · 12-23-2017, 03:21 AM

ugh....thought about "getting in line" for those 1972 doors but I looked at a map, looks to be at least a 3 day one-way trip for me.

In The Ten Ring · 12-23-2017, 10:42 AM

On second thought, I reverse my decision....I'll get in line for those doors if the first fellow decides against those. *If you can allow me to come get those in March when I have the time off from work.

**too much stuff** · 12-23-2017, 07:16 PM

Back of gate and grill pics.

In the ten ring, I will have you in line for doors if anything falls through.

**too much stuff** · 12-23-2017, 07:21 PM

Grill... That is ice and pine needles frozen around the headlight on the pass side. It will clean up ok, but will still be driver condition.

In The Ten Ring · 12-24-2017, 12:52 AM

Quote:

Originally Posted by too much stuff

Back of gate and grill pics.

In the ten ring, I will have you in line for doors if anything falls through.

Thanks man.

70 C/K 20 · 01-13-2018, 11:34 PM

What swap meet are you going to?

**too much stuff** · 01-13-2018, 11:50 PM

Quote:

Originally Posted by 70 C/K 20

What swap meet are you going to?

decatur

**Dieselwrencher** · 02-02-2018, 12:04 AM

Eric, I will take the green gate. How much for the red one? Do you have any 72 below eye line mirrors? Thanks Ryan.

**too much stuff** · 02-04-2018, 01:52 PM

Quote:

Originally Posted by Dieselwrencher

Eric, I will take the green gate. How much for the red one? Do you have any 72 below eye line mirrors? Thanks Ryan.

The 2 in post #3?
Don't think I have any extra mirrors at the moment. Are you thinking a road trip up here for a burb body, a tach dash and a couple gates???

**michael bustamante** · 02-05-2018, 06:47 PM

You got a gmc stepside gate? I can meet in northern texas

**too much stuff** · 02-05-2018, 07:14 PM

Quote:

Originally Posted by michael bustamante

You got a gmc stepside gate? I can meet in northern texas

Sorry, not anymore...

hounddogs! · 02-06-2018, 12:53 AM

How about inner fenders?

**too much stuff** · 02-07-2018, 10:18 PM

Quote:

Originally Posted by 70 C/K 20

Ok, Found bumpers and a tailgate yesterday, but still need the grille.

Are you still in for the grill?

Quote:

Originally Posted by hounddogs!

How about inner fenders?

Sorry, no good inner fenders.

12-08-2017, 09:19 PM	#1
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,769	Gates, roofs, doors, fenders. MN>TX Will be heading from MN to northern Texas in Feb and Figured I would offer up some bigger parts for sale that I can haul with me. You will need to be close to my route or willing to meet close to it. (or local pickup in northern MN) No shipping otherwise. Pb57 has first choice on gates and dieselwrencher has second choice as they have both asked about one. Everything else is up for grabs. Prices are reasonable and would be OK with a few bucks for gas depending on how far out of my way I go. $125 - Blue gate with protector. Surface rust, no holes I see. Very slight bow. $350 - pair of 1972 door shells. Drivers side has a few pin holes, but has been blasted so you see what is there. Very straight on the outside. $125 -fully blasted gate with a few pin holes and slight bow. $400 -blue gate. pretty decent and straight. Has a few screw holes from a tailgate band. $80 - green gate with dents on top otherwise clean. $150 - roof with cargo light. Nice shape. $250 - maroon gate. Slight bow, pretty decent. $120 - red fender, pretty decent. $80/each - blue 68 fender, gold 69-72 fender. Both will need a little work. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

12-08-2017, 09:28 PM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,769	Re: Gates, roofs, doors, fenders. MN>TX Also have a cab in another thread and a set of 15x8" 6 lug wheels. Will probably add more to this thread... Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

12-08-2017, 09:34 PM	#4
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,769	Re: Gates, roofs, doors, fenders. MN>TX Last... Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

12-09-2017, 12:12 AM	#5
718jwh Registered User Join Date: Dec 2014 Location: naperville Il Posts: 236	Re: Gates, roofs, doors, fenders. MN>TX Interested in the doors, what’s your route going to be ? I am 35 miles west of Chicago. Thanks John

12-21-2017, 11:24 PM	#7
70 C/K 20 Registered User Join Date: Nov 2017 Location: Waxahachie Texas Posts: 20	Re: Gates, roofs, doors, fenders. MN>TX Is the grille for sale?

12-08-2017, 09:32 PM	#3
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,769	Re: Gates, roofs, doors, fenders. MN>TX More... Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

12-22-2017, 11:29 PM	#9
garciajulian Registered User Join Date: Nov 2016 Location: Frisco Tx Posts: 55	Re: Gates, roofs, doors, fenders. MN>TX OK sure would like to see them

12-22-2017, 11:46 PM	#10
70 C/K 20 Registered User Join Date: Nov 2017 Location: Waxahachie Texas Posts: 20	Re: Gates, roofs, doors, fenders. MN>TX Ok thanks. I live just south of Dallas. Could meet up when you get down here if it's in better shape than the one I've got.

12-23-2017, 03:21 AM	#11
In The Ten Ring Registered User Join Date: Jun 2013 Location: West Virginia Posts: 6,421	Re: Gates, roofs, doors, fenders. MN>TX ugh....thought about "getting in line" for those 1972 doors but I looked at a map, looks to be at least a 3 day one-way trip for me.

12-23-2017, 10:42 AM	#12
In The Ten Ring Registered User Join Date: Jun 2013 Location: West Virginia Posts: 6,421	Re: Gates, roofs, doors, fenders. MN>TX On second thought, I reverse my decision....I'll get in line for those doors if the first fellow decides against those. *If you can allow me to come get those in March when I have the time off from work.

12-23-2017, 07:16 PM	#13
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,769	Re: Gates, roofs, doors, fenders. MN>TX Back of gate and grill pics. In the ten ring, I will have you in line for doors if anything falls through. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

12-23-2017, 07:21 PM	#14
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,769	Re: Gates, roofs, doors, fenders. MN>TX Grill... That is ice and pine needles frozen around the headlight on the pass side. It will clean up ok, but will still be driver condition. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-13-2018, 11:34 PM	#16
70 C/K 20 Registered User Join Date: Nov 2017 Location: Waxahachie Texas Posts: 20	Re: Gates, roofs, doors, fenders. MN>TX What swap meet are you going to?

02-02-2018, 12:04 AM	#18
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: Gates, roofs, doors, fenders. MN>TX Eric, I will take the green gate. How much for the red one? Do you have any 72 below eye line mirrors? Thanks Ryan. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

02-05-2018, 06:47 PM	#20
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,858	Re: Gates, roofs, doors, fenders. MN>TX You got a gmc stepside gate? I can meet in northern texas __________________ 1967custom



Register or Log In To remove these advertisements.

02-06-2018, 12:53 AM	#22
hounddogs! Restoring it $200 at a time... Join Date: Aug 2008 Location: NE Kansas Posts: 886	Re: Gates, roofs, doors, fenders. MN>TX How about inner fenders? __________________ Charter member of the 'Put the dimmer switch back on the damn floor where it belongs' Society '68 5.3L-4 speed LWB C20; grandpa bought it for the farm in '71. Now LS 5.3, rather than 327. DD '09 Pilot Weekender '65 Skylark 300-4V-4 speed Wife's '07 Lexus ES350; 117 actuator motors and I can't see the engine. Son's '04 F250 SuperCab 6.0

Register or Log In To remove these advertisements.