FS 1958 283 and tranny - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dan42 · 11-14-2007, 09:59 PM

I have a 1958 283 with the original 2 barrel carb, with corvette valve covers (they are chipped on the side). Includes SM 420 4 speed transmission. I'm not sure what the heads are, I never pulled the valve covers - it was only in the truck for a few monthes until I pulled it. Motor ran pretty good when I pulled it out of my '67. $200.00
CORRECTION - I just looked at the block number and it's a block from somewhere between '61 and '64 - so I don't think it's a '58.

dan42 · 11-15-2007, 10:21 AM

ttt

**ScottH** · 11-15-2007, 11:52 AM

I'd be interested if you were on the right coast. Bump for ya.

dan42 · 11-16-2007, 12:07 AM

More pix -

**too much stuff** · 11-16-2007, 12:15 AM

You are correct, Looks like it is a 61-64 283. If you want to sell just the valve covers, let me know.

dan42 · 11-16-2007, 01:05 AM

Thanks, but I have someone interested in them already - I'm gonna pull one of the covers tomorrow and see what the heads came off of. I'll post a picture tomorrow.

olblue60@aol.com · 11-16-2007, 07:25 AM

This looks like an older engine than 1961. If you notice where the bolts are in the valve covers, they are not straight across the covers, but a little closer together on the upper side. I believe 1958 was the last year for this. I would say that at least the heads are 1958 or earlier.

olblue60@aol.com · 11-16-2007, 07:30 AM

I just checked the block #s. Its 61-64. Could be a mix of parts.

BurnoutNova · 11-16-2007, 08:55 AM

the heads may be from somthing older... they ARE the early style heads, so maybe from a 283 or 265

dan42 · 11-16-2007, 09:51 AM

I'll get the numbers today and post them.

dan42 · 11-16-2007, 05:02 PM

Here's pictures of the heads -

dan42 · 11-16-2007, 05:24 PM

'61 Corvette heads/engine?
http://www.rowleycorvette.com/stats61.html

brianthelion02 · 11-16-2007, 05:26 PM

Very clean!!!!!!!1

**too much stuff** · 11-16-2007, 06:00 PM

Heads, 1958-59, 283 truck heads.

DieselEater · 11-16-2007, 07:47 PM

I'm interested in just the tranny.....Have you driven with it under power situations in all gears???

How much to 81082 if it checks out?

A............

dan42 · 11-16-2007, 08:48 PM

Yeah, all the gears are fine, there seems to be a fair amount of slop in it, but it didn't pop out of any gears or make any strange noises. Boy, shipping will probably be more than it's worth - the thing is a boat anchor You're probably talking a couple hundred dollars but if you're interested I'll check it out for you.

dan42 · 11-27-2007, 12:54 AM

Still got it -

11-14-2007, 09:59 PM	#1
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	FS 1958 283 and tranny I have a 1958 283 with the original 2 barrel carb, with corvette valve covers (they are chipped on the side). Includes SM 420 4 speed transmission. I'm not sure what the heads are, I never pulled the valve covers - it was only in the truck for a few monthes until I pulled it. Motor ran pretty good when I pulled it out of my '67. $200.00 CORRECTION - I just looked at the block number and it's a block from somewhere between '61 and '64 - so I don't think it's a '58. Attached Images __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7 Last edited by dan42; 11-16-2007 at 12:11 AM. Reason: Wrong year

11-15-2007, 10:21 AM	#2
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: FS 1958 283 and tranny ttt __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

11-15-2007, 11:52 AM	#3
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS 1958 283 and tranny I'd be interested if you were on the right coast. Bump for ya. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

11-16-2007, 12:07 AM	#4
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: FS 1958 283 and tranny More pix - Attached Images __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

11-16-2007, 12:15 AM	#5
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,764	Re: FS 1958 283 and tranny You are correct, Looks like it is a 61-64 283. If you want to sell just the valve covers, let me know. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

11-16-2007, 01:05 AM	#6
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: FS 1958 283 and tranny Thanks, but I have someone interested in them already - I'm gonna pull one of the covers tomorrow and see what the heads came off of. I'll post a picture tomorrow. __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

11-16-2007, 07:25 AM	#7
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: FS 1958 283 and tranny This looks like an older engine than 1961. If you notice where the bolts are in the valve covers, they are not straight across the covers, but a little closer together on the upper side. I believe 1958 was the last year for this. I would say that at least the heads are 1958 or earlier. __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

11-16-2007, 07:30 AM	#8
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: FS 1958 283 and tranny I just checked the block #s. Its 61-64. Could be a mix of parts. __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

11-16-2007, 08:55 AM	#9
BurnoutNova Registered User Join Date: Mar 2004 Location: CA Posts: 2,057	Re: FS 1958 283 and tranny the heads may be from somthing older... they ARE the early style heads, so maybe from a 283 or 265

11-16-2007, 09:51 AM	#10
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: FS 1958 283 and tranny I'll get the numbers today and post them. __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

11-16-2007, 05:02 PM	#11
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: FS 1958 283 and tranny Here's pictures of the heads - Attached Images __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

11-16-2007, 05:24 PM	#12
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: FS 1958 283 and tranny '61 Corvette heads/engine? http://www.rowleycorvette.com/stats61.html __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

11-16-2007, 05:26 PM	#13
brianthelion02 Overdrive club Join Date: Sep 2007 Location: apache junction, arizona Posts: 819	Re: FS 1958 283 and tranny Very clean!!!!!!!1 __________________ 1971 c-10 1951 3100 chevy 1970 chevy c-30 Sold!

11-16-2007, 06:00 PM	#14
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,764	Re: FS 1958 283 and tranny Heads, 1958-59, 283 truck heads. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

11-16-2007, 07:47 PM	#15
DieselEater Registered User Join Date: Dec 2006 Location: Trinidad, Colorado Posts: 642	Re: FS 1958 283 and tranny I'm interested in just the tranny.....Have you driven with it under power situations in all gears??? How much to 81082 if it checks out? A............ __________________ 69' 3/4 4X4 470ci BBC 700 HP.... D60/14bolt 205/465 http://profile.myspace.com/index.cfm...ndid=127691959



Register or Log In To remove these advertisements.

11-16-2007, 08:48 PM	#16
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: FS 1958 283 and tranny Yeah, all the gears are fine, there seems to be a fair amount of slop in it, but it didn't pop out of any gears or make any strange noises. Boy, shipping will probably be more than it's worth - the thing is a boat anchor You're probably talking a couple hundred dollars but if you're interested I'll check it out for you. __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

11-27-2007, 12:54 AM	#17
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: FS 1958 283 and tranny Still got it - __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

Register or Log In To remove these advertisements.