Always use protection! CPP'S simple upgrade to eliminate shock stud failure, - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*CPPJEFF* · 01-18-2010, 01:18 PM

Guys here is another example of a subtle upgrade that makes a world of difference with protecting your investment. A common problem with these trucks is the factory shock studs pull through especially on a truck that has been lowered, these are a must have!! For board members i will give you guys a set for $25.00 and they are a no brainer.

*Shane* · 01-18-2010, 02:04 PM

$25 shipped?

*CPPJEFF* · 01-18-2010, 07:54 PM

Quote:

Originally Posted by Shane

$25 shipped?

Sure, call me.

POPO1984 · 01-18-2010, 03:30 PM

I will be adding those to my order

**N2TRUX** · 01-18-2010, 07:19 PM

Functional and good looking too...

*Shane* · 01-18-2010, 11:19 PM

give me a number and I'll call tomorrow. thanks!

jugernot · 01-19-2010, 12:29 AM

I'll have to jump on this wagon as well. Take Paypal?

jmedero · 01-19-2010, 12:50 AM

I'll take a set. Who do we call the regular CPP number?

**N2TRUX** · 01-19-2010, 10:13 AM

Quote:

Originally Posted by CPPJEFF

888-522-8303 ext 118

From another thread...

smashingchuck · 01-19-2010, 12:07 PM

Very good idea. Do you take pay pal?

*CPPJEFF* · 01-19-2010, 02:48 PM

Quote:

Originally Posted by smashingchuck

Very good idea. Do you take pay pal?

Yes we sure do. Thanks

**damnyankee36** · 01-19-2010, 08:37 PM

I've seen these before. Why do the stock mounts holes tend to fail on lowered trucks?

DKN · 01-19-2010, 09:25 PM

Quote:

Originally Posted by damnyankee36

I've seen these before. Why do the stock mounts holes tend to fail on lowered trucks?

The factory located the chock in such a way that that as the suspension is compressed (lowered) the shock becomes angled relative to the mounting stud. This angle results in a bending moment on the upper shock stud. Most lowered length shocks are valved stiffer than the OE length to compensate for the shorter suspension travel available because of the lowered ride height.

These brackets are very similar to the OE brackets used on some of the 4 wheel drive trucks. I guess GM figured out the stud was not attached very well but only fixed the problem on 4x4’s.

Danny Nix
CPP

jeffspower · 01-19-2010, 10:35 PM

I need replacements for my 4x4. Do your bolt holes line up with the frames OE rivet holes?

**leddzepp** · 01-20-2010, 12:22 PM

Hey Jeff- I already have 1 mounting stud missing from my frame (as pictured) Do you carry an OEM-type replacement stud? If so, I'd like to get a set of these brackets and a new stud as well. Thanks.

DKN · 01-20-2010, 01:35 PM

Quote:

Originally Posted by leddzepp

Hey Jeff- I already have 1 mounting stud missing from my frame (as pictured) Do you carry an OEM-type replacement stud? If so, I'd like to get a set of these brackets and a new stud as well. Thanks.

Yes we have a replacment stud. I have made repairs like you need. Simply bolt the new stud to a heavy washer, bolt on the new bracket and weld the washer to the frame.

Danny Nix
CPP

**leddzepp** · 01-20-2010, 01:57 PM

Quote:

Originally Posted by DKN

Yes we have a replacment stud. I have made repairs like you need. Simply bolt the new stud to a heavy washer, bolt on the new bracket and weld the washer to the frame.

Danny Nix
CPP

Done deal. I will PM you my address, just need a total price for it all and I can paypal.

Eighty-6 · 01-20-2010, 05:23 PM

I'll take a set :-) Paypal ready.

*CPPJEFF* · 01-20-2010, 05:31 PM

Quote:

Originally Posted by Eighty-6

I'll take a set :-) Paypal ready.

No sweat guys! I have been taking orders for these all morning, by the way i can ship them for $5.00 and include a brand new colored catalog.

stealthy '69 · 01-22-2010, 12:45 AM

Count me in on a set too. Can you PM me with your paypal info? I'll get my info returned at that point. Thanks.

S10Fan · 01-22-2010, 06:33 AM

Yes! PM me as well,Thanks!

Edit....I'm interested in the shock brace and front shock studs for a 73.

*CPPJEFF* · 01-22-2010, 11:48 AM

Quote:

Originally Posted by stealthy '69

Count me in on a set too. Can you PM me with your paypal info? I'll get my info returned at that point. Thanks.

Sure you guys can e-mail me with your info to jeff@classicperform.com and i will make an order and send you a paypal request but i need all your shipping info to make an order. Thanks guys!

Eighty-6 · 01-22-2010, 02:09 PM

Quote:

Originally Posted by CPPJEFF

Sure you guys can e-mail me with your info to jeff@classicperform.com and i will make an order and send you a paypal request but i need all your shipping info to make an order. Thanks guys!

Email sent

stealthy '69 · 01-23-2010, 04:43 AM

Quote:

Originally Posted by eighty-6

email sent

x2

*CPPJEFF* · 01-23-2010, 12:10 PM

Quote:

Originally Posted by stealthy '69

x2

Thanks guys!!

01-18-2010, 01:18 PM	#1
CPPJEFF Account Suspended Join Date: Jan 2010 Location: Anaheim California Posts: 713	Always use protection! CPP'S simple upgrade to eliminate shock stud failure, Guys here is another example of a subtle upgrade that makes a world of difference with protecting your investment. A common problem with these trucks is the factory shock studs pull through especially on a truck that has been lowered, these are a must have!! For board members i will give you guys a set for $25.00 and they are a no brainer. Attached Images Last edited by CPPJEFF; 01-18-2010 at 01:20 PM.

01-18-2010, 02:04 PM	#2
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Always use protection! CPP'S simple upgrade to eliminate shock stud failure, $25 shipped?

01-18-2010, 03:30 PM	#4
POPO1984 Registered User Join Date: Jul 2009 Location: Houston, Tx Posts: 1,133	Re: Always use protection! CPP'S simple upgrade to eliminate shock stud failure, I will be adding those to my order __________________ 1972 SWB Medium Olive South Houston Instagram: Antbish84

01-18-2010, 07:19 PM	#5
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: Always use protection! CPP'S simple upgrade to eliminate shock stud failure, Functional and good looking too... __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

01-18-2010, 11:19 PM	#6
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Always use protection! CPP'S simple upgrade to eliminate shock stud failure, give me a number and I'll call tomorrow. thanks!

01-19-2010, 12:29 AM	#7
jugernot Life, Be In It..... Join Date: Oct 2003 Location: Novato, California Posts: 1,498	Re: Always use protection! CPP'S simple upgrade to eliminate shock stud failure, I'll have to jump on this wagon as well. Take Paypal? __________________ Project Name: LEMON DROP. Reconstruction started "December 2000". Projected completion date "Who knows" http://67-72chevytrucks.com/vboard/s...d.php?t=200082

01-19-2010, 12:50 AM	#8
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,072	Re: Always use protection! CPP'S simple upgrade to eliminate shock stud failure, I'll take a set. Who do we call the regular CPP number? __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

01-19-2010, 12:07 PM	#10
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	Re: Always use protection! CPP'S simple upgrade to eliminate shock stud failure, Very good idea. Do you take pay pal? __________________ 78 Build Thread 4Runner Build

01-19-2010, 08:37 PM	#12
damnyankee36 Senior Member Join Date: Sep 2002 Location: Alamogordo, NM Posts: 694	Re: Always use protection! CPP'S simple upgrade to eliminate shock stud failure, I've seen these before. Why do the stock mounts holes tend to fail on lowered trucks?

01-19-2010, 10:35 PM	#14
jeffspower Well, Whoop-dee-do! Join Date: Mar 2003 Location: Easton, Mo. pop.- me & scarcely a few others Posts: 2,302	Re: Always use protection! CPP'S simple upgrade to eliminate shock stud failure, I need replacements for my 4x4. Do your bolt holes line up with the frames OE rivet holes? __________________ '68 GMC shortbox 4x4 350/SM465/T221- bought it in '83 SOLD '72 K20 500 Cad/TH400/NP205 SOLD '92 Chevy 2500 6.5 mech TD 4L80E crusty daily driver '72 Monte Carlo... sweet low mile toy '11 Dodge Challenger IE 392 6spd... midlife car

01-20-2010, 12:22 PM	#15
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,994	Re: Always use protection! CPP'S simple upgrade to eliminate shock stud failure, Hey Jeff- I already have 1 mounting stud missing from my frame (as pictured) Do you carry an OEM-type replacement stud? If so, I'd like to get a set of these brackets and a new stud as well. Thanks. Attached Images __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

01-20-2010, 05:23 PM	#18
Eighty-6 Registered User Join Date: Jul 2008 Location: Round Rock, Tx Posts: 249	Re: Always use protection! CPP'S simple upgrade to eliminate shock stud failure, I'll take a set :-) Paypal ready.

01-22-2010, 06:33 AM	#21
S10Fan Old Heap Driver Join Date: Mar 2008 Location: Newport News, Va Posts: 2,640	Re: Always use protection! CPP'S simple upgrade to eliminate shock stud failure, Yes! PM me as well,Thanks! Edit....I'm interested in the shock brace and front shock studs for a 73. __________________ _____________________________ Bryan '99 Silverado 1500, 4.3, 5-speed, reg cab, short bed '50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser. '40 F*d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver. Last edited by S10Fan; 01-22-2010 at 06:54 AM. Reason: The rest of the story...LOL*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.