|
|
|
09-21-2013, 11:54 PM
|
#1 |
|
Registered User
Join Date: Dec 2011
Location: Lanc Co PA
Posts: 226
|
No brake lights
To make a long story short, I put a nine inch in my truck with Explorer rear disc brakes. I took out the factory proportion valve and have the brake lines from the master cyl. directly to the lines for the front and rear brakes. I didn't know it until today but, I have no brake lights when I'm on the brakes. Does this have to do with not having the valve with the pressure switch? If so, how do I wire my brake lights to work? This is on an '87 R10 by the way.
Thanks, Dave Posted via Mobile Device
__________________
1987 R10 Pump Gas 496/TH375 Best 1/4 pass to date 60' 1.49 1/4 10.93 MPH 120 |
|
|
|
09-22-2013, 11:33 AM
|
#2 |
|
Registered User
Join Date: Apr 2013
Location: Pasadena, Maryland
Posts: 160
|
Re: No brake lights
Brake lights use a switch under the dash on the pedal pivot bracket, not a pressure switch. Check the fuse.
Posted via Mobile Device |
|
|
|
|
09-22-2013, 02:49 PM
|
#3 |
|
Registered User
Join Date: Dec 2011
Location: Lanc Co PA
Posts: 226
|
Re: No brake lights
I did check the fuses last night and they were good. Its the switch. I have power at the wires. I checked it with a volt meter and I also jumped the wires with a piece of jump wire. After I jumped it, the brake lights worked. There's also no cont through the switch when the switch is in the closed position.
__________________
1987 R10 Pump Gas 496/TH375 Best 1/4 pass to date 60' 1.49 1/4 10.93 MPH 120 |
|
|
|
|
09-24-2013, 09:19 PM
|
#4 | |
|
78K & 79C Jimmys
Join Date: Nov 2009
Location: Ottawa Ont CANADA
Posts: 7,901
|
Re: No brake lights
Quote:
should be resting on the pedal
__________________
John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350 |
|
|
|
|
|
09-22-2013, 07:15 PM
|
#5 |
|
Registered User
Join Date: Apr 2013
Location: Pasadena, Maryland
Posts: 160
|
Re: No brake lights
Glad to hear it's fixed.
Posted via Mobile Device |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
