77 1 ton single wheel have forged crank? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*64chevgmc* · 04-09-2005, 05:59 PM

i know for sure it would be a 4 bolt main, but what about forged crank, going to pick it up tommaro

please help

*1FaastC10* · 04-09-2005, 09:39 PM

i wouldnt put money on it being a 4 bolt main. a) you're dealing with a 30 year old truck and who knows who has been under the hood and b) there's no set "option" of a 4 bolt main, its pretty much whatever was available to be put in when the truck rolled down the line.

what engine?

Tom · 04-10-2005, 03:19 PM

never heard of a forged crank truck motor.....

plumbcut · 04-10-2005, 07:49 PM

negative on the crank being forged

*64chevgmc* · 04-11-2005, 02:38 AM

well ive heard manyt hings, its a 1 ton single wheel... i was told ALL 1 tons have forged crank and pistons as well, as also 4 bolt main

badone07 · 04-11-2005, 05:10 AM

Quote:

Originally Posted by 64chevgmc

well ive heard manyt hings, its a 1 ton single wheel... i was told ALL 1 tons have forged crank and pistons as well, as also 4 bolt main

I disagree with the word "ALL", especially the forged pistons. However, it could very well have a forged steel crank, if a 350. Have one on my shelf from a factory pickup. You could check the crank's casting number to narrow down it's origin, besides just looking at the casting/forging "stripe." It's late, sorry for my lack of proper terminology. Most likely a 350 will have 4 bolt mains, in a 1 ton. However, like Jeremy basically said, you really won't know unless you pull the pan. I can't comment on a big block though and you didn't specify what motor it actually was or year of truck.

04-09-2005, 05:59 PM	#1
64chevgmc Account Suspended Join Date: Jul 2004 Posts: 16	77 1 ton single wheel have forged crank? i know for sure it would be a 4 bolt main, but what about forged crank, going to pick it up tommaro please help

04-10-2005, 03:19 PM	#3
Tom driving is in my blood Join Date: Dec 1999 Location: Mesa AZ Posts: 5,717	never heard of a forged crank truck motor..... __________________ -78 c10 short/step: 388cid, M20, 5/5 drop, lots more. Playtoy and first vehicle. -98 c1500 x-cab: 5.7L, 17" rims, 5/6 drop, flowmaster, helper bags,NBS rear disk brakes. -02 Suburban 4x4: leveled front -CBR600F4i, CBR600RR, CBR1000RR, and standup skis DISCLAIMER: I cant spell for the life of me.

04-09-2005, 09:39 PM	#2
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,400	i wouldnt put money on it being a 4 bolt main. a) you're dealing with a 30 year old truck and who knows who has been under the hood and b) there's no set "option" of a 4 bolt main, its pretty much whatever was available to be put in when the truck rolled down the line. what engine?

04-10-2005, 07:49 PM	#4
plumbcut california fill Join Date: Apr 2004 Location: Sunny So-Cal Posts: 694	negative on the crank being forged

04-11-2005, 02:38 AM	#5
64chevgmc Account Suspended Join Date: Jul 2004 Posts: 16	well ive heard manyt hings, its a 1 ton single wheel... i was told ALL 1 tons have forged crank and pistons as well, as also 4 bolt main



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.