The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1969 - 1972 Blazers and Jimmys Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-19-2016, 09:35 PM   #1
70gmcjimmy
GMCDAC
 
70gmcjimmy's Avatar
 
Join Date: Apr 2006
Location: Rapid City, SD
Posts: 837
Carpet or mat hold down strips?

Hi all, I don't know what I have here and was hoping to see if it's ok to ask. I will be honest, these are going to be for sale, but without knowing what they are I can't give info. I did some searching in the for sale section to try to learn but didn't really get much info. They may not be in good enough condition to sell even.

All I do know is that they are way different than the ones in my '70 Jimmy that are carpet hold downs. The side tailgate weatherstrip hold downs are about an inch shorter than my '70, but I'm sure they haven't been cut. They were supposed to be from a '71 or '72 Jimmy that was already parted out when I got these. The long ones seem to fit my '70 but mine are good and as I said very different.

If this is against the rules please delete. I didn't read anything in the rules that suggested that this is not allowed.

Thanks---DAC
Attached Images
     
__________________
1970 GMC K5 Jimmy Custom 4X4 Mom's driver from 1971 to 2001!! Under rebuild!
1972 GMC C2500 Pickup owned since 1979 Needs a rest and refurbish!
1955 GMC 100 2nd design driven almost daily!

Rest In Peace Mom. "Dolly" 7/15/23 - 5/18/09
GMC driver for 30 years!

70gmcjimmy is offline   Reply With Quote
Old 03-20-2016, 01:10 PM   #2
Blazerowner
Senior Member
 
Blazerowner's Avatar
 
Join Date: Apr 2006
Location: Yuba City, Ca
Posts: 1,954
Re: Carpet or mat hold down strips?

The middle strip in the first picture is a rear carpet strip. The right strip is a tailgate strip for the hatch to rest on. The other two are for the weatherstrip on the tailgate and run vertical with the bed. There is a weatherstrip that tucks into them and the carpet strip that seals the tailgate. Not sure why your other ones would be different. I have a 72 and they look the same.
__________________
Kirk
72 Blazer CST 4wd highlander
Blazerowner is offline   Reply With Quote
Old 03-20-2016, 07:18 PM   #3
70gmcjimmy
GMCDAC
 
70gmcjimmy's Avatar
 
Join Date: Apr 2006
Location: Rapid City, SD
Posts: 837
Re: Carpet or mat hold down strips?

Quote:
Originally Posted by Blazerowner View Post
The middle strip in the first picture is a rear carpet strip. The right strip is a tailgate strip for the hatch to rest on. The other two are for the weatherstrip on the tailgate and run vertical with the bed. There is a weatherstrip that tucks into them and the carpet strip that seals the tailgate. Not sure why your other ones would be different. I have a 72 and they look the same.
Thank-you Kirk! That clears it up for me. My tailgate/hatch rest is so different that I didn't even realize that's what the one strip is! For educational purposes here's a couple of comparison pics. Now I am thinking that the tailgate seal design must have been improved from 1970, just don't know which style 1971 would have used since your truck is a '72.

Pic 1- the two on the left are my 1970 carpet strips. They are both the same.
Pic 2- end of the tailgate hatch rests
Pic 3- same end taken from above
Pic 4- the side where the hatch rests/tailgate top
Pic 5- the vertical tailgate weatherstrip retainers side by side

DAC
Attached Images
     
__________________
1970 GMC K5 Jimmy Custom 4X4 Mom's driver from 1971 to 2001!! Under rebuild!
1972 GMC C2500 Pickup owned since 1979 Needs a rest and refurbish!
1955 GMC 100 2nd design driven almost daily!

Rest In Peace Mom. "Dolly" 7/15/23 - 5/18/09
GMC driver for 30 years!

70gmcjimmy is offline   Reply With Quote
Old 03-21-2016, 03:08 AM   #4
Blazerowner
Senior Member
 
Blazerowner's Avatar
 
Join Date: Apr 2006
Location: Yuba City, Ca
Posts: 1,954
Re: Carpet or mat hold down strips?

I'm pretty sure the two strips on the left are just two front carpet strips with one flipped around.. The rear is prone to rust and I believe people may have swapped them. My 72 had the strip with the channel for weatherstripping and its original. I have the front strip just like the two you have in the picture and its in better shape. I've heard people say the front and rear are the same on some years but this has never been substantiated as I've seen the rear strip in 69-72. If you decide to sell the rear strip I might be a buyer.

Quote:
Originally Posted by 70gmcjimmy View Post
Thank-you Kirk! That clears it up for me. My tailgate/hatch rest is so different that I didn't even realize that's what the one strip is! For educational purposes here's a couple of comparison pics. Now I am thinking that the tailgate seal design must have been improved from 1970, just don't know which style 1971 would have used since your truck is a '72.

Pic 1- the two on the left are my 1970 carpet strips. They are both the same.
Pic 2- end of the tailgate hatch rests
Pic 3- same end taken from above
Pic 4- the side where the hatch rests/tailgate top
Pic 5- the vertical tailgate weatherstrip retainers side by side

DAC
__________________
Kirk
72 Blazer CST 4wd highlander
Blazerowner is offline   Reply With Quote
Old 03-21-2016, 06:50 PM   #5
70gmcjimmy
GMCDAC
 
70gmcjimmy's Avatar
 
Join Date: Apr 2006
Location: Rapid City, SD
Posts: 837
Re: Carpet or mat hold down strips?

Quote:
Originally Posted by Blazerowner View Post
I'm pretty sure the two strips on the left are just two front carpet strips with one flipped around.. The rear is prone to rust and I believe people may have swapped them. My 72 had the strip with the channel for weatherstripping and its original. I have the front strip just like the two you have in the picture and its in better shape. I've heard people say the front and rear are the same on some years but this has never been substantiated as I've seen the rear strip in 69-72. If you decide to sell the rear strip I might be a buyer.
In '70 in this truck anyway one of the left ones was in fact the rear original. Mom bought this truck when it was less than a year old early in '71 so I know that had not been changed. I got my learner's permit drivers license in it later that year. Like the tailgate weather strip trim and the hatch rest is all different from '71 and '72 that must have been also. That strip was never removed until I pulled the torn up carpet about 8 years ago.

This stuff is going to be put up for sale, (not the '70 carpet strips) but I still need to learn how to ship parts this long before I can begin to calculate shipping! Hopefully I can come up with a plan within a couple weeks. I go on-call at work tomorrow so internet time will be limited for a week.

Thanks for all the commentary!

DAC
__________________
1970 GMC K5 Jimmy Custom 4X4 Mom's driver from 1971 to 2001!! Under rebuild!
1972 GMC C2500 Pickup owned since 1979 Needs a rest and refurbish!
1955 GMC 100 2nd design driven almost daily!

Rest In Peace Mom. "Dolly" 7/15/23 - 5/18/09
GMC driver for 30 years!

70gmcjimmy is offline   Reply With Quote
Old 03-20-2016, 07:26 PM   #6
DeadheadNM
Carpe manana

 
DeadheadNM's Avatar
 
Join Date: Dec 2010
Location: Eau Claire, WI
Posts: 12,424
Re: Carpet or mat hold down strips?

There are two different designs for the hatch weatherstip to tailgate top metal strip...
__________________
1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547
1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308

Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland
DeadheadNM is offline   Reply With Quote
Old 03-20-2016, 07:43 PM   #7
70gmcjimmy
GMCDAC
 
70gmcjimmy's Avatar
 
Join Date: Apr 2006
Location: Rapid City, SD
Posts: 837
Re: Carpet or mat hold down strips?

Quote:
Originally Posted by DeadheadNM View Post
There are two different designs for the hatch weatherstip to tailgate top metal strip...
Yeah and none of the other pieces are the same as the stuff on my '70! I remember you had a thread about the flat vs ribbed carpet strips some time back, but I never knew the tailgate top strip and the vertical ones were different too. Which style of all this stuff did '71 use?

DAC
__________________
1970 GMC K5 Jimmy Custom 4X4 Mom's driver from 1971 to 2001!! Under rebuild!
1972 GMC C2500 Pickup owned since 1979 Needs a rest and refurbish!
1955 GMC 100 2nd design driven almost daily!

Rest In Peace Mom. "Dolly" 7/15/23 - 5/18/09
GMC driver for 30 years!

70gmcjimmy is offline   Reply With Quote
Old 03-20-2016, 07:49 PM   #8
DeadheadNM
Carpe manana

 
DeadheadNM's Avatar
 
Join Date: Dec 2010
Location: Eau Claire, WI
Posts: 12,424
Re: Carpet or mat hold down strips?

Not sure which is correct for 71 but suspect the lower profile example - it's funny all the little differences GM imparted from year to year like use of the lower tailgate trim on 72 MY CST/lower molding equipped K5s.
__________________
1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547
1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308

Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland
DeadheadNM is offline   Reply With Quote
Old 03-20-2016, 10:08 PM   #9
70gmcjimmy
GMCDAC
 
70gmcjimmy's Avatar
 
Join Date: Apr 2006
Location: Rapid City, SD
Posts: 837
Re: Carpet or mat hold down strips?

I just studied Tristan's thread better and it appears '71 and '72 used the same tailgate seal strips as well as the hatch rest. Sure wish I would have kept up on his thread better since I just rebuilt my transfer case and painted it Chevy orange instead of the GMC Fireball red-------

Probably try to figure out how to mask and repaint!

DAC
__________________
1970 GMC K5 Jimmy Custom 4X4 Mom's driver from 1971 to 2001!! Under rebuild!
1972 GMC C2500 Pickup owned since 1979 Needs a rest and refurbish!
1955 GMC 100 2nd design driven almost daily!

Rest In Peace Mom. "Dolly" 7/15/23 - 5/18/09
GMC driver for 30 years!

70gmcjimmy is offline   Reply With Quote
Old 03-21-2016, 08:52 PM   #10
1rippen6
Senior Member
 
Join Date: May 2011
Location: Greencastle PA
Posts: 6,782
Re: Carpet or mat hold down strips?

Just get the gray pvc electric conduit at lowes tape each in really good and ship I have done it plenty of times. Most of the time the USPS is reasonable on the long skinny stuff if not use one of the other shipping companies.
1rippen6 is offline   Reply With Quote
Old 03-21-2016, 10:06 PM   #11
70gmcjimmy
GMCDAC
 
70gmcjimmy's Avatar
 
Join Date: Apr 2006
Location: Rapid City, SD
Posts: 837
Re: Carpet or mat hold down strips?

Quote:
Originally Posted by 1rippen6 View Post
Just get the gray pvc electric conduit at lowes tape each in really good and ship I have done it plenty of times. Most of the time the USPS is reasonable on the long skinny stuff if not use one of the other shipping companies.
That's valuable advice, thank-you 1rippen6! I've always been a buyer for the most part so this shipping deal is fairly new to me. I have a not-so rippen6 in my '55 GMC---LOL!

DAC
__________________
1970 GMC K5 Jimmy Custom 4X4 Mom's driver from 1971 to 2001!! Under rebuild!
1972 GMC C2500 Pickup owned since 1979 Needs a rest and refurbish!
1955 GMC 100 2nd design driven almost daily!

Rest In Peace Mom. "Dolly" 7/15/23 - 5/18/09
GMC driver for 30 years!

70gmcjimmy is offline   Reply With Quote
Old 03-21-2016, 11:56 PM   #12
Blazerowner
Senior Member
 
Blazerowner's Avatar
 
Join Date: Apr 2006
Location: Yuba City, Ca
Posts: 1,954
Re: Carpet or mat hold down strips?

I've seen pvc pipe used as well. Yea I don't know on the strips but maybe 72 is different to keep the elements out. Seems weird they would not have thought that up in older models but there are quite a few 72 only parts on that year.
__________________
Kirk
72 Blazer CST 4wd highlander
Blazerowner is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:21 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com