MI 60-62 Rolling Short Frame - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**motorcity23** · 10-11-2022, 10:02 AM

As pit free a frame as you will find. The front cab mounts (for 63-66 cab) have been welded on, and some repair has been done on the lower bumper mount (still fits 60-62 bumper). Has a maybe later truck 12 bolt (cast 3817769). Rolling on 2008ish wheels, center holes cut to fit.
Start with a solid frame, Porterbuilt makes a ton of suspension stuff for these.
$850 for the rolling frame
I also have the bed sides (pictured), bed front panel, tailgate bed floor, radiator, fenders and a few more parts that could go along.
Tom

Pontitruck · 10-11-2022, 10:03 PM

I’m interested but leaving on vacation for two weeks. Will check back. Interested in bed and frame
Thanks
Joe

Pontitruck · 10-12-2022, 10:49 AM

What’s the difference between the 60-62 cab mounts and 63 up?

**cwcarpenter98** · 10-12-2022, 09:28 PM

Quote:

Originally Posted by Pontitruck

What’s the difference between the 60-62 cab mounts and 63 up?

60-62 are further from the frame rail than 63-66

**motorcity23** · 10-13-2022, 10:04 AM

This frame had a 63-66 cab mounted on it. I'm assuming the original cab mounts were to wide, so later mounts were welded in place. If a 60-62 cab goes back on this frame, it'll probably need to have these mounts removed and early mounts installed.

**motorcity23** · 10-24-2022, 12:12 PM

Just the frame is remaining.

10-11-2022, 10:02 AM	#1
motorcity23 Junior Member Join Date: Dec 2016 Location: Lyon, MI Posts: 71	60-62 Rolling Short Frame As pit free a frame as you will find. The front cab mounts (for 63-66 cab) have been welded on, and some repair has been done on the lower bumper mount (still fits 60-62 bumper). Has a maybe later truck 12 bolt (cast 3817769). Rolling on 2008ish wheels, center holes cut to fit. Start with a solid frame, Porterbuilt makes a ton of suspension stuff for these. $850 for the rolling frame I also have the bed sides (pictured), bed front panel, tailgate bed floor, radiator, fenders and a few more parts that could go along. Tom Attached Images

10-11-2022, 10:03 PM	#2
Pontitruck Registered User Join Date: Sep 2018 Location: South of the Indy 500 Posts: 116	Re: 60-62 Rolling Short Frame I’m interested but leaving on vacation for two weeks. Will check back. Interested in bed and frame Thanks Joe

10-12-2022, 10:49 AM	#3
Pontitruck Registered User Join Date: Sep 2018 Location: South of the Indy 500 Posts: 116	Re: 60-62 Rolling Short Frame What’s the difference between the 60-62 cab mounts and 63 up?

10-13-2022, 10:04 AM	#5
motorcity23 Junior Member Join Date: Dec 2016 Location: Lyon, MI Posts: 71	Re: 60-62 Rolling Short Frame This frame had a 63-66 cab mounted on it. I'm assuming the original cab mounts were to wide, so later mounts were welded in place. If a 60-62 cab goes back on this frame, it'll probably need to have these mounts removed and early mounts installed.

10-24-2022, 12:12 PM	#6
motorcity23 Junior Member Join Date: Dec 2016 Location: Lyon, MI Posts: 71	Re: 60-62 Rolling Short Frame Just the frame is remaining. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.